查询词典 AND element

The results of numerical analysis show that the elastic modular and the poisson ratio have no effect on two-dimensional bearing capacity, but can affect the ultimate bearing capacity of three-dimensional foundations and control the convergence and precision of finite element calculation; the earth pressure coefficient controls the geostatic stress of foundation, sequentially affects the ultimate bearing capacity of foundations and the convergence of numerical calculation. When calculating the ultimate bearing capacity of undrained saturated foundation, the complete formulation exists shear locking, and reduce formulation exists hourglassing, so the hybrid formulation is suitable to imitate the geomaterial. When the soil obeys nonrelevent flow rule, the yielding function is different from potential function, and the elastic-plastic matrix of soil is asymmetric, so the unsymmetry numerical solver and appropriate finite element mesh is required.

研究结果表明，土体弹性模量和泊松比对二维基础极限承载力没有影响，但是影响着三维矩形基础的极限承载力，控制着ABAQUS数值算法的计算精度与收敛速度；地基土压力系数控制着地基土体中的地应力平衡，从而影响着二维条形基础和三维矩形基础的极限承载力和地基破坏包络面；对于不排水饱和软黏土地基，常规的完全积分单元会造成剪力自锁现象，而减缩积分单元则存在过于柔化的现象，故采用杂交单元来模拟较合适；当土体服从非关联流动法则时，屈服函数与塑性势函数之间存在差异，从而导致土体弹塑性矩阵呈现非对称性，在有限元计算中必须采用非对称数值解法，并且合理地划分单元才能对极限承载力进行准确求解。

Selects in the material on inorder to for person by mystical graceful graceful feminine daydream,both must leave the dust refinedly, and does not lose the nationalclothing characteristic, therefore must select with it feeling closelining, the pure silk, the tissue, the flower bud silk unionutilization, suddenly reveals its mystically, is graceful; Is and theblack gray and so on other colors embellishes using the clothing wholepurple, achieved the harmonious feeling, echoes with the subject;Again take has the national style design, lace element and so onsplicing as the design spot, joins the modern clothing synthesis tocut out the idea, during attenion popular element, needs to derivethis nationality traditional culture and the national specialcharacteristic penetrates from the national clothing color and themodelling into during the fashion female attire design, manifestsAmerica of the fashion which the national culture and the modern tidalcurrent unifies.

在材料的选用上为了给人以神秘曼妙优雅的女性遐想，既要出尘脱俗，又不失民族服装特色，因此要选用与之感觉相接近的面料，真丝、薄纱、蕾丝的结合运用，来突显其神秘、优雅；运用服装整体的紫色系与黑色灰色等其他色点缀，来达到和谐的感觉，与主题相呼应；再以有民族风格的图案、花边的拼接等元素为设计点，加入现代服装合体的裁剪理念，在注重流行元素的同时，更需要汲取本民族传统文化和民族特质从民族服装色彩及造型深入到时尚女装的设计之中，体现民族文化与现代潮流相结合的时尚之美。

Based on the laser longitudinal mode splitting theory, a novel scheme of dual-frequency laser with large frequency-difference is presented using electrically controlled birefringence of liquid crystal, and the transmitted resonant mode splitting by birefringent of Fabry-Perot etalon has been analyzed theoretically. A new element of liquid crystal Fabry-Perot etalon is designed and fabricated, which serves as aselector and splitter of both laser longitudinal modes and Fabry-Perot etalons transmitted resonant modes. Two different experimental systems of laser-diode end-pumped Nd:YAG laser have been set up using two different LDs, and the transmission of liquid-crystal cell have been measured. When the empty LCFP is inserted in the cavity of high-power LD pumped Nd:YAG laser, the oscillation of a single laser longitudinal mode have been observed, such a result shows that the designed and fabricated LCFP element is capable of selecting single axial mode. While an anti-reflected liquid crystal cell is inserted in the cavity of Nd:YAG laser end-pumped by the high-power LD, it is difficult to confirm weather the laser longitudinal modes have been spitted or not. The subject is summarized in this thesis and the improvement of the project has been presented.

论文以激光纵模的分裂理论为基础，提出了可望获得几十GHz甚至上百GHz的液晶电控双折射双频Nd：YAG激光器的总体方案，并对用双折射效应分裂F-P标准具透射谐振模进行了理论分析；设计并加工了一种集激光纵模选择、激光纵模分裂和F-P标准具谐振透射模分裂于一体的多功能元件——液晶电控双折射F-P标准具；建立了两种不同功率激光二极管端面泵浦的Nd：YAG激光实验系统，并对液晶盒的透射性质进行了测试；将未灌注液晶的空液晶F-P摘要标准具插入大功率LD泵浦Nd：、叭G激光谐振腔内，观察到了单纵模激光输出，说明所设计和加工的液晶F一P标准具具有纵模选择能力；将镀有增透膜的液晶盒插入大功率LD泵浦Nd八7AG激光谐振腔内，是否产生了激光纵模分裂现象还难以确定。

According to the standard and request of mechanical structures for electronic equipment tests, the finite element model of the electronic equipment cabinet was built by using the software of finite element analysis-ANSYS and simulated the tests of random vibrations by loading and calculating. The 3-D isopleths graph of deformation and stress of the cabinet was obtained. It could confirm the maximum of deformation and stress of the cabinet and probability of occurrence. Through more analysis of the frequency response curve reflected directly and clearly the deformation of the cabinet within the particular seismic frequency.

根据电子设备机械结构随机振动试验的标准和要求，采用有限元分析软件ANSYS建立电子设备机柜结构的有限元模型，通过加载求解对其进行随机振动试验的数值模拟，得到机柜有限元模型的三维变形和应力等值线图，进而确定机柜承受应力和变形的最大值及发生概率；通过对频率响应曲线的进一步分析，可以直观明了地反映出机柜承受一定频率范围地震下的变形情况。

This paper presents conductive polymer molecular materials with insulating powder, mixed into the deployment of surge suppressors for low capacitance of paste, while the component design concept is based on the field of passive components, manufacturing process to make the basic theory to design the protective components, the main use of the existing ceramic substrate for the component body structure design, screen design in the body through the structure of the gap at the top of the printing layer of a different conductors, and then to learning to know the printing process technologies approach the low capacitance of the surge suppressor paste cover the gap in the two conductors, and by the resistance of plastic burning process technology, the temperature of sintering parts made of electrostatic protection element, and this protection through the external ESD components in bombardment tests, measurement of capacitance electrostatic discharge after bombardment, Trigger voltage and leakage current data, and the volume measured by the results of future discussion of the layout of this different style of work in the same area, different clearance, solid content and temperature than the next, for the attainment of performance components, a low capacitance ESD protection devices with low breakdown voltage requirements and to chip-based protection devices can be designed to integrate with the advanced Integrated Circuits or used independent of the electrostatic protection element in the system.

本文提出高分子导电分子材料搭配绝缘粉末，调配混合成适用於低电容突波抑制器之PASTE，而元件设计概念是以被动元件制程领域作基础理论去设计此防护元件，主体利用现有陶瓷基板为元件本体结构设计，在经由网版设计在本体结构上方印刷一层不同的间隙导体，再以习知印刷制程技术方式，将低电容突波抑制器之PASTE覆盖在两导体的间隙内，并经由电阻制程习知塑烧技术，将元件烧结适当温度制成静电防护元件；而此防护元件在经外加静电放电轰击测试后，量测静电放电轰击后的电容、Trigger voltage及漏电流相关数据，并藉由测结果讨此同的布局样式，在相同工作区面积、不同间隙、固含量与温度比下，对於元件效能是否达到静电防护元件低电容与低崩溃电压的需求，并藉此晶片型防护元件可设计整合於先进积体电或应用於独系统的静电防护元件中。

And use the prior and more consummate ways to carry through vaneaccidence design, These ways have own technology points and disadvantage, In this paperstressly discuss the momentum-element theory way, this way was developed in the basic ofthe two ahead ways, and it overcome their defect. It also use element theory to deal withvane design. In the vane designing and aerodynamical characteristic calculating they bothrelate with intervene gene, so the keystone is to carry through the intervene gene in twocase, thereout to do the vane design and aerodynamical characteristic calculating.

运用翼型的基本概念和风力机叶片的基础外型参数进行叶片设计的预研讨论，并分别运用了Glauert和Schmitz叶片设计方法叶片进行初步设计，这两种方法有其各自技术特点和缺点，文中还着重研究了动量—叶素理论方法，这种方法在前两种设计方法的基础上发展而成，并采用两者的叶素研究方法进行叶片设计，动量叶素理论方法在进行叶片外型设计和叶片气动特性计算都涉及到干涉因子，文中重点对设计和计算情况下的干涉因子进行处理，并由此来设计叶片的外型和进行气动特性的计算。

In the light of the complex, high-level and non-linear feature of the mathematical model which describe the transport of the coalbed methane, this paper study the fully-implicit solving method of the mathematical model in detail. Based on the complexity of the algebraic equations which are formed eventually, according to the alternating direction implicit difference pattern, this paper use the iterative method and the fully main element Gauss-Jordan eliminating method to solve equations, which is to use the iterative method to determine coefficient matrix and use the fully main element Gauss-Jordan method to solve th linear algebraic equation group, at the same time of studying the solving method of the mathematical model, according to the devising requirement of FORTRAN77 program structure, this paper draw up computer program and form the corresponding computer model, and verify the validity and reliability of the model in theory by operating the model.

重点研究了模型内、外边界及有关参数的处理，针对描述煤层甲烷运移的数学模型是一个复杂、高阶非线性数学模型的特点，详细研究了模型的全隐式求解方法，根据最后形成的代数方程组的复杂性，按交替方向隐式差分格式，采用迭代与全选主元高斯约当消去法相结合的方法求解方程：即确定系数矩阵采用迭代法，求解线性方程组时采用全选主元高斯约当消去法，在研究模型解法的同时按FORTRAN结构化程序设计的要求，编制计算机程序，形成相应的CBMRS计算机模型，并通过模型的运行从理论上证明了模型的正确性与可靠性。

By means of field test for the pile of 15 meters length and MARC finite element analysis, this paper studies the bearing mechanism of the reinforced mixing pile, analyzes the law of load transfer and the percentage about cement-soil ring and reinforced concrete core under vertical load, analyzes the change law and interactive behavior about the pile's surface bearing and end bearing. In the end an experiential equation that can be used in Tianjin area to estimate the bearing capacity of single pile is proposed on the basis of test researches and finite element analysis.

分析了劲性搅拌桩在竖向荷载作用下的荷载传递规律及芯桩与水泥土的荷载分担比；分析了劲性搅拌桩在竖向荷载作用下桩侧摩阻力和桩端阻力随桩顶荷载的变化规律；分析了劲性搅拌桩在竖向荷载作用下桩端阻力及桩侧阻力的发挥性状与桩土位移间的关系及端阻力与侧阻力的荷载分担比。

High protein feed can enhance airframe the absorption to zinc, keep in storage and feed of sex of metabolization; animal and the zincic absorptivity of inorganic, organic additive are taller, and the zincic absorptivity in plant sex feed is very low, zinc inside pig body excrete basically through bowel, along with eduction of fluid of pancreatic juice, bowel. 1.1 zinc inside pig body physiology function 1.1.1 raise collecting appetite zinc is element of the taste in saliva to make part, and the structural function with gustatory epithelial to oral cavity mucous membrane element and metabolization are influential action, affect the configuration of alveolus of the taste bud in glossal tit and function then, because this adds zinc,can enhance taste bud to taste sensitive.

高蛋白饲料能增强机体对锌的吸收、贮存和代谢；动物性饲料和无机、有机添加剂的锌吸收率较高，而植物性饲料中的锌吸收率则非常低，锌在猪体内的排泄主要通过肠道，随胰液、肠液排出。1.1锌在猪体内的的生理功能1.1.1提高采食量锌是唾液中味觉素的构成成分，而味觉素则对口腔黏膜上皮细胞的结构功能及代谢有影响功能，进而影响舌乳头中味蕾小孔的形态和功能，因此添加锌可增强味蕾对味觉的敏感。

Four-node degenerated shell element and rigid shell element are used in our FEM model.Updated Lagrange formulation and rate form constitutive equation are adopted to solve the problem of large strain and large rotation in sheet forming process.Sheet metal material property is described by plastic anisotropy yielding model and isotropic hardening model.Master surface-slave surface contact model is used to define the contact between tools and blank.Contact constraints are enforced with a kinematic algorithm and friction stress is computed by Coulomb friction law.Dynamic relaxation method is used to treat springback after forming stroke.

四结点蜕化壳单元和刚体壳单元分别用来建立板和模具的有限元模型；更新Lagrange法和速率型本构关系被用来处理板料变形中的大应变和大转动；材料模型采用塑性各向异性屈服与等向强化模型；通过主从面模型定义板料和模具的接触，接触算法采用运动约束法，摩擦力用库仓定律计算；并利用动力松弛法对回弹过程进行了计算。

It inculcates justification before God on the ground of human merits.

它说明在上帝灌输在地上人类优点。

TH Leaguer has excellent Quality Control and Management System.

本公司具有完善的品管部门。