查询词典 thin layer

As a whole,the notable characteristic of primary productivity in size-fractioned structure was that nanoplankton occupied comparatively significant advantage in Beibu Gulf.Nanoplankton has the largest contribution to gross primary productivity,and picoplankton was the secondary contributor,while microplankton the least.The contribution of microplankton for primary productivity in the north Gulf was more than that in the other waters.Nanoplankton and picoplankton contribute more to the gross primary productivity in offshore deep waters than in inshore shallow waters3.The Beibu Gulf can be divided into three ecoregions:Region-Ⅰis the ecoregion in inshore shallow waters of the north Gulf.In average,the water depth is 18m,DIN is 1.88μmol/L,DIP is 0.20μmol/L,N:P is 9.4:1,dissolved silicate is 5.17μmol/L,the Chl a conentration in surface layer is 2.27mg·m~(-3),the assimilation index in surface layer is 3.80mg/,the primary productivity is 198.78mgC/(m~2·d), and potential fishery production is estimated to be 0.24gC/(m~2·a) according to the primary productivity.The ecoregion is mainly affected by the northern coastal water systems,and may be fit for aquaculture;Region-Ⅱis the ecoregion in offshore deep waters of the north Gulf and the coastal shallow waters to the west Hainan Island.In average,the water depth is 35m,DIN is 2.01μmol/L,DIP is 0.18μmol/L,N:P is 11.2:1,disovled silicate is 4.23μmol/L,the chlorophyll a of surface layer concentration is 1.45mg·m~(-3),the assimilation index of surface layer is 4.12 mg/,the primary productivity is 276.60mgC/(m~2·d),and the estimated potential fishery production is 0.34gC/(m~2·a) according to the primary productivity. The ecoregion was mainly influenced by ocean current from the South China Sea, rivers in the west coast of Hainan Island and the water from Qiongzhou Strait.It may be fit for aquaculture and fishery;Region-Ⅲis the ecoregion in offshore deep waters of the mid and south Gulf.In average,the water depth is 75m,DIN is 0.77μmol/L, DIP is 0.15μmol/L,N:P is 5.1:1,disovled silicate is 3.05μmol/L,the chlorophyll a of surface layer concentration is 0.70mg·m~(-3),the assimilation index of surface layer averaged is 3.69mg/,the primary productivity is 350.89mgC/(m~2·d),and the estimated potential fishery production is 0.43gC/(m~2·a) according to the primary productivity.The ecoregion was mainly affected by the circulation inside Beibu Gulf, and may be fit for fishery.

初级生产力的粒级结构的一个显著特点是总体上微型浮游生物在全调查海区均占较明显优势，对总初级生产力的平均贡献最大；微微型浮游生物对初级生产力的平均贡献次之；小型浮游生物对总初级生产力的平均贡献最小；湾北部小型浮游生物对初级生产力的平均贡献高于湾中部和湾南部，而湾中部和湾南部微型和微微型浮游生物对初级生产力的平均贡献高于湾北部，远岸深水区高于近岸浅水区。3、北部湾可以分为三个生态区：湾北部近岸浅水区，该区的环境主要特点是平均水深19m，DIN浓度平均值为1.88μmol/L，DIP浓度平均值为0.20μmol/L，N：P为9.4：1，硅酸盐浓度平均值为5.17μmol/L，表层叶绿素a平均值高达2.27 mg·m~(-3)，表层同化指数平均为3.80 mg/，初级生产力平均值198.78mgC/(m~2·d)，根据初级生产力计算潜在渔业资源碳生产量平均为0.24 gC/(m~2·a)，该区主要受湾北部沿岸水系影响，适合作为水产养殖区；湾北部深水区和海南岛西部沿岸浅水区，该区的环境主要特点是平均水深35m，DIN浓度平均值为2.01μmol/L，DIP浓度平均值为0.18μmol/L，N：P为11.2：1，硅酸盐浓度平均值为4.23μmol/L，表层叶绿素a平均值1.45 mg·m~(-3)，表层同化指数平均为4.12mg/，初级生产力平均值276.60 mgC/(m~2·d)，根据初级生产力计算潜在渔业资源碳生产量平均为0.34 gC/(m~2·a)，该区主要受南部湾口区海流向湾内延伸，沿岸海南岛河流注入湾内和琼州海峡过道水的影响，适合作为渔业作业区和水产养殖区；湾中部和南部远岸深水区，该区的环境主要特点是平均水深75m，DIN浓度平均值为0.77μmol/L，DIP浓度平均值为0.15μmol/L，N：P为5.1：1，硅酸盐浓度平均值为3.05μmol/L，表层叶绿素a平均值0.70 mg·m~(-3)，表层同化指数平均为3.69 mg/，初级生产力平均值350.89 mgC/(m~2·d)，根据初级生产力计算潜在渔业资源碳生产量平均为0.43 gC/(m~2·a)，该区主要受北部湾环流影响，适合作为渔业作业区。

The method includes the following steps: depositing a non-magnetic layer (3) of sufficient thickness; anisotropically etching the non-magnetic layer to form a steep wall of suitable dimensions at the required position of a flux guide; depositing a magnetic material to form a magnetic layer (9) on the wall in such a manner that the magnetic layer has a thickness corresponding to the required track width; removing undesired deposits of magnetic material but maintaining the magnetic layer on the wall; depositing an insulating material (19a) to cover the magnetic layer.

该方法包括下列步骤：淀积足够厚度的一个非磁层(3)；非均质地蚀刻该非磁层以便在磁通引导的要求位置形成适宜尺寸的阶跃内壁；淀积一个磁性材料，以便在该内壁上形成一个磁层(9)，使得该磁层具有对应于该要求的磁迹宽度的一个厚度；去除不希望的淀积的磁性材料而保持在该内壁上的磁层；淀积一个绝缘材料(19a)以便覆盖该磁层。

We found that the microstructures and magnetic properties were not influenced with depositing temperature and sputtering power. The magnetic properties were only affected by Fe layer thickness. When the Fe layer thickness is thinner than 5 nm, weak exchange coupling raised between Fe cap layer and FePt recording layer. When the thickness reached 10 nm, the strongest exchange coupling formed. Film coercivity didn't distinctly vary as Fe layer thickness is thinner than 15 nm. Consequently, we measured DCD curves and had the same conclusions. Indeed, the appearance of exchange coupling is confirmed with 10 nm Fe cap layer.

我们并发现溅镀Fe之温度与瓦数，并不会对结构或是磁性质有显著的影响，Fe厚度的改变虽然也不会改变结构，但是对Cr/Pt/FePt/Fe磁性质却有明显的变化，当Fe厚度薄时(3、5 nm)，在Fe和FePt界面仅有弱的交换耦合力产生，Fe厚度是10 nm时，此时交换耦合力为最强，厚度再增加到15、20 nm时，Hc反而略为上升，同样的我们量测DCD曲线，也证实了Fe厚度10 nm的确有交换耦合力存在。

Microscopic characteristics of cladded crystal fiber are analyzed by X-ray diffraction, Laue X-ray diffraction and scanning electron microscopy, it is found that magnesium-ion indiffusion does not affect the single crystal structure and the domain structure of the magnesium diffused crystal fiber. It is found for the first time that MgO-rich layer in the magnesium diffused LiNbO〓 surface layer exhibits the crystal structure of an unknown compound from the Li-Mg-Nb-O ternary system and MgNb〓O〓. It is proposed for the first time that this unknown compound and MgNb〓O〓 in MgO-rich layer are the real sources of magnesium-ion indiffusion LiNbO〓. Their appearance indicate that MgNb〓O〓 is in the surface layer of MgO-rich layer, the unknown compound is in the subsurface layer and beneath where the MgNb〓O〓 is located, and these compounds have obviously preferred orientation.

通过镁离子内扩散法，首次在国内实现了具有阶跃和抛物折射率分布的c轴LiNbO〓单晶光纤和a轴Nd：MgO：LiNbO〓单晶光纤的芯—包层波导结构，为我国在该项目的研究填补了空白；建立了晶纤损耗的测量系统，提出了利用单模石英光纤作为晶纤入射光耦合器的思想；通过对晶纤损耗的测量，得到了包层晶纤比未包层晶纤损耗降低约14倍的好结果，并实现了低次模传输：对经镁离子内扩散实现包层后的晶纤的微观特性，利用X射线衍射，劳厄照相和扫描电镜表征发现，晶纤并不因镁离子的内扩散而影响其单晶结构和镁的扩散层畴的变化。

XRD,X-ray EDS analysis,AFM and Fourier transform infrared spectroscopy were employed to characterize PbSe thin films. The results show that all of the films were heteromorphy and the growth temperature has effect to the diffract peaks of the films. The contents of PbSe thin films by PLD consisted with the targets,and realizing thin films deposited with same constitutes; the films had rather flatness surface and compact structure; the peak-to-tail roughness of PbSe thin films surfaces was less than 200nm;they had sensitivity to light of a specified wavelength and obvious absorption edge at 5μm corresponding to band-gap width of PbSe thin films;light of wavelength less than 5μm was strongly absorbed.

通过脉冲激光沉积法在Si(111)和SiO2玻璃基片上制备了PbSe薄膜。X射线衍射、X射线能谱、原子力显微镜、傅里叶变换红外光谱仪测试结果表明：所有制备的薄膜都为多晶薄膜，发现薄膜生长温度对薄膜衍射峰有一定影响；PLD法制备的薄膜的成分与靶材的基本一致，实现了同组分沉积；所有薄膜表面比较平滑，表面不平整度小于200nm，结构比较致密；PbSe薄膜对红外光具有敏感的响应特性；在波长为5μm处存在有明显的吸收边，此吸收边对应于直接带隙PbSe材料的禁带宽度；对应于波长小于5μm的红外光，PbSe薄膜存在有明显的强吸收。

This is the socalled thin layer penetrating air drying process. The critical thickness of wet silkworm chrysalises is about 27~35 mm. In the thin layer penetrating gas drying process of silkworm chrysalises, the temperature of drying medium is subject to that at which the protein can withstand and the flow rate is subject to the allowable leakage of air from the media layer; c. For the surface convective drying process of stripe porous media e.

对于粒状多孔介质的穿流气流干燥过程，当物料厚度小于某一临界厚度时，厚度的变化对干燥过程无明显影响，即所谓薄层穿透气流干燥过程，就蚕蛹而言，临界厚度约为27~35mm；在蚕蛹薄层穿流气流干燥过程中，介质温度应以蛋白质所能承受的温度为限，流速应以穿流料层时不发生漏风现象为限；c。

According to the simulated results, it was found that the incident light was not fully absorbed in the solar cell due to a thinner base layer. The un-absorbed incident light could be further reflected by a AuGe/Au mirror layer and absorbed again by the base layer. Thus the disadvantage of the GaAs thin-film cell with a thinner base layer could be solved by the additional reflection from the AuGe/Au mirror with a high reflectivity within 800~1000 nm wavelength. Moreover, the external quantum efficiency in the long wavelength region and short current density were also increased.

从模拟结果中得知，薄膜型结构之太阳电池可以经由AuGe/Au之金属反射层，再次将未被基极层完全吸收之入射光反射回太阳电池，使得薄膜型结构在长波段的外部量子效率获得提升，这结果显示薄膜型结构太阳电池可利用AuGe/Au之金属反射层在长波段的高反射率，改善使用较薄基极层时，无法将入射光完全吸收的缺点。

The structure of the thin film capacitor 1 of this invention is: form sequentially at least the bottom electrode layer 102, the high dielectrics constant oxide film 103 and the upper electrode layer 105 on the semiconductor substrate 101; said upper electrode layer 105 which is a film layer 104 formed by the electrical conductive material which is processable by reactive ion etching, or a multilayered film composed of two kinds of film layers 107 and 108, which are each formed of a conductive material which is processable by at least two kinds of reactive ion etching.

要约 薄膜电容器1是至少在半导体基片101上按顺序形成下部电极层102、高介电常数氧化物膜层103、上部电极层105而构成的薄膜电容器，该上部电极层105由一种仅由可用反应性离子刻蚀加工的导电性材料形成的膜层104，或至少两种由可用反应性离子刻蚀加工的导电性材料分别形成层状的多层膜层107和108构成；经历350℃的热试验之后，对该薄膜电容器1施加OV到2V的驱动电压的薄膜电容器漏电电流密度为1×10 －8 A/cm 2 以下。

In addition, some modifications on several computational methods are also presented. Using LMTO method the electronic structure of several systems are studied, and some results are obtained. They are: The ideal Nb (100) surface has three surface states, the multi-layer relaxed surface has two surface states. The surface energy of the ideal surface is higher than that of the relaxed surface, that means that the multi-layer relaxed surface is more stable than the former one, which supports the LEED results. The mono-layer relaxed Ag (111) surface is the most stable one among several" stable surface models"presented by several researchers. The surface energy of Ag (111) surface is higher than that of surface Ag (001), which supports some experimental results such as different reaction rate at different surface orientations for the same material. The surafce states of Si (111) surface not only locate near the Fermi level, but also in the valence band, which agrees well with Cohen's conclusion. Si (111)-H is an effective model for analysing the surface states and H adsorbed on the back surface is a good method for improving the convincingness of the results obtained on thinner slab models. The surface stability depends on three different kinds of MoSi〓(001) surfaces, the surface with mono-layer Si is the most stable one, and the surface with Mo at the first layer is the most unstable one among them. These are consistant with the Kemoda's experimental results. The valence bands of clean or K adsorbed CdTe (111) surface agrees well with the synchrotron radiation studies. The surface of CdTe (111) consists of four kinds of surface models which show different surface electronic structures and different surface structure stabilities. The conclusion agrees well with Wu's experimental work. The different absorbed alkali metals on the CdTe (111) surface give different adsorption characteristics which have relations not only with the valence electrons, but also with the core ones of the alkali metals. The electonic structures of Si-C alloys are different from that of Si-Ge alloys, and the energy band gaps of Si-C alloys do not increase linearly with Carbon concentration, our conclusion supports Alexander's results, but conflicts with Soref's one.

现分述如下： LMTO方法及其应用方面：1）通过对Nb（100）表面电子态分析发现清洁理想表面有三个表面态，多层弛豫表面有两个表面态；表面能大小说明多层弛豫表面更稳定，支持了LEED结果。2）通过对采用不同方法获得的几种不同Ag（111）表面稳定结构的表面能计算分析，给出了单层弛豫表面为Ag（111）表面的最稳定结构；从Ag（111）单层弛豫表面和Ag（001）表面的表面能比较，发现了Ag（001）表面表面能要比Ag（111）小的，表明了同种物质不同表面取向将表现出不同物理、化学性质，这是与实验中得出的结论是吻合的，3）通过对Si（111）表面态分析，不仅发现了Si（111）表面不仅具有居于费米能级附近的悬挂键所对应的表面态，而且还有很多表面态位于价带能量范围内，与Cohen等结果一致，H饱和slab模型背表面相当于增加了slab层的厚度，是一有效的变相增加slab层厚的方法，弛豫表面较清洁理想表面价带谱们低能端的少许移动，预示着总能降低，说明弛豫表面较清洁理想表面稳定。4）MoSi〓具有三种表面，从费米能级上态密度值大小得到单层Si表面最稳定，Mo原子为表层原子的表面最不稳定，双层Si原子表面居中的结论，这与Kemoda等人实验结果是一致的。5）通过对CdTe（111）表面表面电子态、表面结构稳定性及表面H、碱金属吸附的电子结构系列研究，不仅得出了CdTe（111）清洁及碱金属K吸附价带谱与同步辐射光电子谱相吻合的结果，而且发现了CdTe（111）表面具有四类不同原子近邻特征，表现出四类不同的表面结构及电子结构特征：不同表面态分布、不同的表面结构稳定性（表层原子与次层原子成三键有一悬挂键的表面要比表层原子与次层原子成一键有三悬挂键稳定（与Wu等人实验结果一致））、不同的H吸附特性。

The main results of the investigation are as following:(1) Some important criteria for the design of multi-layer structure are acquired: the ratio of the layer thickness to the contact diameter should be controlled to a value about 0.8; increasing the number of the gradient layers and elasticity modulus of the top layer would benefit to the yield strength and the stress status at the interface.（2）By means of molecular dynamics simulations for a indentation and sliding process, it is discovered that dislocations of 45 direction to the surface occur in the surfaces layer, which is correspond to the direction of the plastic flows observed in the macroscopic continuous medium. The irreversible deformation caused by the dislocation and the atom piles at the surface are responsible for the irreversibility of the force response. They are also the main factors for the friction generation. The temperature and the indentation velocity have significant effects on the deformation behaviors of the material of the surface layer. The yield strength would increase obviously if the indentation velocity is greater than 10 m/s.（3）A method to evaluate the fracture toughness of coating by estimating the crack-density functionβof a Wicker''s indentation was proposed. Meanwhile a new surface treatment technology was developed using non-equilibrium plasma.（4）A MD-FE hybrid method and corresponding software was developed to analysis the tribological behaviors for multiplayer system.

研究主要内容和结果有：（1）得到指导梯度膜设计的几个准则：控制膜层厚度与接触半径比在0.8左右为宜；适当增加梯度层层数和顶层弹性模量，有利于提高抗屈服能力和改善界面处的应力状态；（2）通过对嵌入和滑动摩擦过程的分子动力学模拟，发现表层产生一个与宏观连续介质的塑性流动方向观测一致的45 方向位错；位错造成的不可逆变形和表面的原子堆积，是力的响应不可逆性的原因，也是构成摩擦力的主要因素；温度和嵌入速度对材料变形特性有显著的影响，当嵌入速度大于10 m/s时，屈服强度明显增加；（3）提出压痕裂纹密度系数β半定量判定膜层断裂韧性的方法；并开发出表面强化新工艺；（4）开发出分析表面摩擦学特性的MD-FE复合模拟方法和相应模拟软件。

Don not attempt to do something which you can not to do.

不要企图做那些办不到的事情。

The expression of CTGF and TNF-αweredetected by immunochemistry and the number of Clara Cells was calculated.

光镜下观察肺组织的病理变化，采用免疫组化染色观察肺组织中结缔组织生长因子和肿瘤坏死因子-α的表达和Clara细胞的数量。