查询词典 shear

The main influence factors to shear strength test result was systenatically studied by the contrast test,including test machine,shear clamp,distance between shear blade edge,clearance fit between test sample and shear hole,shear rate,effect of machining on sample's outer surface.

通过对比试验，全面系统地研究了剪切强度的主要影响因素：试验设备、剪切夹具、刀口间隙、试样与剪切孔间隙、剪切速度以及试样的表面机加工对钛合金丝材剪切强度的定量影响。

This study uses plate shear instrument that can produce a plate shear and record both torsion and settlement simultaneously. Radius of specimen ring is 10 cm. Height of the specimen is 10.5 cm. The plate shear tests were carried out with initial relative densities 30%. Fine contents 5%~35% of Mai-Liao sand , fine contents 0%、20% of Vietnam-sand, fine content 0%、18% of Ottawa-sand. Reversal and one-way shear, normal stresses 7 kPa~100kPa.To measure settlement and try to get a relative density and to measure cone resistance value after plate shear.

本研究系利用可施加盘转剪力并同时记录扭力与沉陷的圆盘剪力仪进行实验，土样环半径为10 cm，土样高度为10.5 cm，初始相对密为度为30%、细料含量为5%~35%之麦寮砂、0%及20%之越南砂、0%及18%之标准砂，进行单向及往复式盘转剪力试验，载重为7 kPa~100 kPa，试验后量取沉陷量，求得盘剪后之相对密度，并量测盘剪后之圆锥贯入阻抗值。

The safety factor q, one of the important parameters in tokamaks, has directly and accurately been measured in TFTR, DIII-D, JT-60U, and Tore Supra, etc The reversed shear configuration, which has negative magnetic shear in the inner region and positive magnetic shear in the outer region, has been proposed as an advanced tokamak operation Improved confinement and the formation of an internal transport barrier in the negative shear region have been observed One is tending to research physical subjects in the reversed shear tokamaks.

详细近年来，一种新的先进的托卡马克磁场位形—反磁剪切位形已经逐步被人们所认识，在托卡马克装置上普遍观察到了负磁剪切区等离子体约束的显著改善，人们越来越多地关注在反磁剪切位形下托卡马克的物理问题。

Research also provides a finite element method for the study of masonry walls seismic behavior. Firstly, through the stone-dust mortar compressive experiment, pressure experiment, blocks bending experiment, water blocks experiment, 3 slabs shear experiment, diagonal loading experiment and the compression experiment, the values of compressive strength, bending strength, average water weight are obtained. Then the shear breakage of the masonry, behavior of shear stressτvaring withσ, load-displacement curves, ladder-shaped slit shear strength, shear strength of links linking, compressive strength and elastic modulus are also presented.

首先通过石头粉砂浆抗压试验、砖块压力试验、砖块抗折试验、三砖抗剪试验、对角加载试验、短柱的承压试验等测得了石头粉砂浆的抗压强度，砖块的抗压强度，砖块的抗弯强度，以及砌体剪切破坏形态、剪应力τ随正应力σ的变化规律、砌体对角压墙片的载荷-位移关系曲线、阶梯形缝抗剪强度及通缝抗剪强度和弹性模量。

Five main phenomena were found, firstly, the high plasticity clay could well suitable to large deformation, and had strain-hardening behavior obviously, as well as, the little dilatancy; secondly, there was no correlation between stress paths and shear strength but the stress-strain relations were influenced by stress paths; thirdly, the little stress increment ratio, the higher increase speeding of shear stress and breaking strength under the condition of same initial normal stress; the fourth, the relations between normal strain and normal stress in simple shear test was consistent with which in the single-direction compression test, if there was no dilatancy; the last, the curve of relation between stress ratio and shear strain could be well simulated by hyperbola.

试验结果表明，高塑性粘土能够较好地适应大变形，接触面剪应力与切向应变关系呈剪切硬化型曲线，法向剪胀不明显；接触面剪切强度与应力路径无关，应力应变关系与应力路径密切相关；初始法向应力一定，应力增量比越小，剪应力增长越快，对应的破坏剪应力也越高；无剪胀发生情况下，法向应变与法向应力关系曲线与单向压缩试验具有一致性；应力比与切向应变呈良好的双曲线关系。

Five main stalk crops planted in northern China including wheat, corn, broomcorn, soybean, and millet, were chosen to be the samples of the experiments. About seven morphological traits (such as plant height, ear length, ear weight, moisture content and so on) were measured in the crop mature period. The maximum shear force during shearing process, through static test equipment, at the second internode of the basal stalk, was recorded. And shear strength of each crop was calculated to find the differences of shear strength among different crops. The optimal regression models of shear force and morphological traits were obtained by multiple linear regression method with Statistics Analysis System. The equation based on the regression models was constructed.

本文以北方主要茎秆作物（小麦、玉米、高粱、大豆、谷子）为研究对象，试验测定了成熟期茎秆基部第二节间的最大剪切力及株高、穗长、穗重、含水率等七种形态特性指标，获得了静载情况下相关样本的剪切强度；分析比较了不同茎秆作物剪切强度的差异性，并利用SAS软件对茎秆作物剪切力与形态特性指标进行了多元线性回归，得到了剪切强度对形态特性指标的最优回归方程。

To correct this problem of shear test, we improved the equipment of lab large-scale shear test and developed an especially new one which overcome the disadvantages of normal equipment, make the result more accuracy and can do more analyze about the shear surface, dilatability of the mixture only through shear test.

本研究对室内大型直剪试验进行了改进，研发了新型的土石混合料室内大型直剪试验系统，克服了常规直剪仪存在的主要问题，还可以进行剪胀率、剪切面起伏特征、剪切面分形等研究，使得试验结果更精确、可靠，试验分析更完善。

The shear modulus or modulus of rigidity describes an object's tendency to shear (the deformation of shape at constant volume) when acted upon by opposing forces; it is defined as shear stress over shear strain.

剪切模量或刚度模量，描述了一个物体在反力作用下的受剪切程度；它被定义为剪切应变下的剪切应力。

By equivalent principle, formulae for all equivalent main force, main moment and shear center of the distribution shear and the result of numerical simulation were given. Finally relationship between dynamic shear and static shear was presentedatoo.

应用力系等效原理，给出分布剪力的等效主矢量、主矩和剪力中心表达式及数值模拟结果，以及动态体表剪力与静态体表剪力的关系。

The main reason why quarter-sawn board of Birch had smaller dry compressing shear strength than flat-sawn board of Birch in normal conditions was that Birch had different shear strength to the grain between quarter-sawn board and flat-sawn board. Meanwhile xylary rays in flat-sawn board were transversely cut and left a lot of pores in the flat-sawn board, so adhesive can enter these pores and turn into adhesive nail. While these pores provided a kind of tunnel for water, so cause this phenomenon that wet compressing shear strength of flat-sawn board of Birch was smaller than that of quarter-sawn board of Birch. The possible reason why quarter-sawn board of Oak had greater dry compressing shear strength than flat-sawn board of Oak in normal conditions was that ratio of springwood on quarter-sawn board and flat-sawn board was different.

造成柞木径切板的常态压缩剪切强度比弦切板的常态压缩剪切强度大的主要原因是，在径切板和弦切板上早材胶接的比例不同，径切板的胶合强度试件上早材胶接的比例相对少，而弦切板的胶合强度试件上早材胶接的比例比径切板的胶合强度试件上早材胶接的比例相对大，由于早晚材胶接过程中强度决定于早材，这部分胶接强度比较低，这就使得柞木径切板的常态压缩剪切强度比弦切板的大；同时在柞木弦径面胶接过程中由于实际胶接面积的不同也能造成弦径面上API胶粘剂与之形成的化学键的数量不同，这也是造成柞木径切板的常态压缩剪切强度比弦切板的大的原因之一。

In this new architectural plan the Garden of Golgotha came to be at the centre of the new city.

Aelia 是高举他自己，并在此城内朝拜罗马诸神。

The continuous nature of peat accumulation means that terrestrial coaly rocks may provide a higher resolution and more complete record of base-level change than the time-equivalent shallow-marine strata, thus enabling the identification of highfrequency cycles that are not recorded in themarine strata.

泥炭积累的持续性质的手段，陆地coaly岩石可提供较高的分辨率和更完整的记录基准面变化的影响时，相当于浅海阶层，从而使确定的高频周期，不记录在themarine 阶层。