查询词典 freight density

Secondly, the particle density, energy density, net baryon density and net strangeness density are calculated, and the relation between them and chemical potential is discussed.

其次计算粒密度、能密度，净重子密度和净奇异子密度以及分析它们和化学势的关系。

A field trial for plant density has been used for practical remediation in 2004 and 2005, it has four treatments, 10 cm×10 cm、20 cm×20 cm、10 cm×40 cm and 40 cm×40 cm, respectively. The results were follows: the optimization plant density was 20 cm×20 cm; Peteris vittata L. was a herbaceous plant fit to adequacy increased density for enhancing the biomass and removalling of arsenic; with increased the plant density, the plant were accumulated more proportion arsenic in their fronds, and then made promote the efficiency of arsenic removal from contaminated soils.(2) It was a complicated pyrolysis course for plant incineration.

1在10cm×10cm、20cm×20cm、10cm×40cm与40cm×40cm 4个种植密度下，利用蜈蚣草对砷污染土壤进行了2年的田间实际修复，得出如下结论：蜈蚣草是一种适宜于密植的草本植物，具有通过提高栽培密度来提高其地上部生物产量的潜力；同时蜈蚣草密植有利于促使其吸收的砷向地上部富集，从而有利于进一步提高其对砷污染土壤的修复能力；综合考虑修复过程中的收获方式、经济成本与可操作性，在4个密度处理中密度20cm×20cm为蜈蚣草的最佳栽培密度。

objective to investigate whether hypoxia preconditioning exist in adipose tissue,and construct the hypoxemic model of adipose tissue.methods after injected different density cocl2 to rat's subcutaneously of groin,use immunohistochemical method detect hif-1α protein,and use rt-pcr detect hif-1α mrna.results after injected different density cocl2,the adipose tissue of rat's groin express different degree of hif-1αprotein and hif-1αmrna.,and reach the peak when the density is 20-40 mg/kg and the time is 3 h.conclusion hypoxia preconditioning exist in adipose tissue,and the effect of preconditioning is most evidence when the density is 20-40 mg/kg and the time is 3 h.

目的 探讨脂肪组织中是否存在缺氧预适应现象，构建cocl2致缺氧的缺氧模型。方法不同浓度的cocl2大鼠腹股沟区皮下层浸润注射，分别用免疫组织化学法和rt-pcr法检测该区脂肪hif-1α蛋白和hif-1α mrna的表达情况。结果用不同浓度的cocl2行化学缺氧后在不同时间点观察有不同程度的hif-1α蛋白和hif-1α mrna表达，其中，在浓度为20～40 mg/kg，时间为3 h时脂肪组织中hif-1α表达达高峰。结论脂肪组织存在缺氧预适应现象；cocl2的浓度选择20～40 mg/kg，时间选择3 h时缺氧预适应效果较佳。

The results were as follows the airdried density ( moisture content of wood is 12%), the basic density and the ovendry density were 0.583 g·cm-3, 0.462 g·cm-3 and 0.507 g·cm-3 respectively, the airdried density was at the medium level in domestic wood species;the shrinkage coefficient of radial, tangential and volumetric were 0.099%, 0.183% and 0.296% respectively, the maximum swelling were 4.106%, 7.958% and 12.627% respectively;the ratio of tangential shrinkages to radial shrinkages was 1.5-1.9;the toughness was 52.12 kJ·m-2;the hardness of cross, radial and tangential section were 41.53 MPa, 31.41 MPa and 35.51 MPa respectively;the compressive strength parallel to grain was 44.50 MPa ;the modulus of elasticity in static bending and the bending strength were 12.63GPa and 127.31 MPa respectively;the shearing strength parallel to grain of radial and tangential were 8.76 MPa and 10.54 MPa respectively;the cleavage strength to grain of radial and tangential were 124.3 N·mm-1 and 138.6 N·mm-1 respectively.

结果表明大叶栎木材的气干密度（含水率为12％）、基本密度和全干密度分别为0.583 g·cm-3、0.462 g·cm-3和0.507 g·cm-3，气干密度属于国产木材的中等级水平；径向、弦向和体积干缩系数分别为0.099%、0.183%、0.296%，湿胀率依次为4.106%、7.958%和12.627%，差异干缩为1.5-1.9，其尺寸稳定性较好；冲击韧性为52.12 kJ·m-2，端面、径面和弦面硬度分别为41.53 MPa、31.41 MPa和35.51 MPa，顺纹抗压强度为44.50 MPa，抗弯弹性模量和抗弯强度分别为12.63 GPa和127.31 MPa，径面和弦面顺纹抗剪强度分别为8.76 MPa和10.54 MPa，抗劈强度依次为124.3 N·mm-1和138.6 N·mm-1。

The results were as follows: the air-dried density(moisture content of wood is 12%),the basic density and the oven-dry density were 0.583 g·cm-3,0.462 g·cm-3 and 0.507 g·cm-3 respectively,the air-dried density was at the medium level in domestic wood species;the shrinkage coefficient of radial,tangential and volumetric were 0.099%,0.183% and 0.296% respectively,the maximum s...

结果表明：大叶栎木材的气干密度(含水率为12%)、基本密度和全干密度分别为0.583 g.cm-3、0.462 g.cm-3和0.507 g.cm-3，气干密度属于国产木材的中等级水平；径向、弦向和体积干缩系数分别为0.099%、0.183%、0.296%，湿胀率依次为4.106%、7.958%和12.627%，差异干缩为1.5-1.9，其尺寸稳定性较好；冲击韧性为52.12 kJ.m-2，端面、径面和弦面硬度分别为41.53 MPa、31.41 MPa和35.51 MPa，顺纹抗压强度为44.50 MPa，抗弯弹性模量和抗弯强度分别为12.63 GPa和127.31 MPa，径面和弦面顺纹抗剪强度分别为8.76 MPa和10.54MPa，抗劈强度依次为124.3 N.mm-1和138.6 N.mm-1。

Currently in a surface warship of the our country everyplace all provided with the sail coal gas body to report to the police the instrument on the boat, gas density that sensor adopt to convey gas density value traditional 4-20mA mode of analog signal, have to each measure passway allocate one is it is it report to the police to measure to have and density value show measuring board of function, as the density of gas measures the passway board of the different quantities of different outfit of the figure of the passway, but there is many figure of the large-scale naval vessel passway, so the volume of warning system will become very huge , unfavorable to attenbants to use, and traditional 4-20mA electric current ring transmits the signal, unfavorable to transmitting at a long distance, easy to bring and interfere.

核心提示：摘要目前在我国各地型水面舰船上都配备了航煤气体报警仪，气体浓度传感器采用的是传统的4-20mA模拟信号的模式传送气体浓度值，只好每个检测通道配备一块具有检测报警及浓度值显示功能的检测板，随着气体浓度检测通道数目的不同配备不同数量的通道板，但大型舰船通道的数目比较多，因此报警系统体积会变得十分庞大，不利于操作人员使用，而且传统的4-20mA电流环传输信号，不利于长距离传输，容易带来干扰。为了巡检的需要，需要将其改造成现场智能仪表，通过将传感器检测结果

With analysing the the fatigue mechanism, the general mode of interply fatigue damage propagation is denoted by delamination length and crack density. Based on the power-law, the relationship between number of cycles and delamination length and crack density are established. The specimen is modeled as an equivalent six-ply material system. Starting with the analysis of interply stress, the interply shear stress under cyclic loading is calculated by using nonlinear three-demension FEA. According to the stage regularity of fatigue damage propagation, such models as average strain, effective modulus, ratio of delamination length and crack density, experimental relationship between crack density and effective modulus, are proposed by introducing subsection coefficient.

通过对疲劳机理的分析，确定了以脱层长度和裂纹密度表示的层间疲劳损伤演化的一般模式，利用指数法则建立了脱层长度和裂纹密度随疲劳循环周次变化的关系；从层间应力分析入手，以等效六层的材料模型对循环载荷下的层间剪切应力进行了三维非线性有限元分析；根据疲劳损伤扩展的阶段性，引入分段系数，分别建立了平均应变与载荷循环周次的分段线性模拟模型、有效刚度随载荷循环周次的变化关系模型、裂纹密度变化和脱层长度变化关系随载荷循环周次变化的分段线性模型以及疲劳裂纹密度和有效刚度关系的经验模型。

Experience in air freight,ocean freight and 3PL logistics solution will be a plus.

有从事过国际空运、海运和第三方物流工作的经历。

Guangzhou-chang International Freight Forwarders Ltd, with the International Chamber of Shipping Ministry, the Ministry of air, land of the trailer, the Department of warehousing, customs and other departments of the company's operations In international freight traffic have a wealth of experience to the growing international cargo market have a profound understanding.

广州市亚昶国际货运代理有限公司，设有国际海运部，空运部，陆路拖车部，仓储部，报关部等部门。公司的操作人员在国际货运方面都有着丰富的经验，对日益发展的国际货运市场有着深厚的了解。

C. we offer free service of rate issue , after you registered , you can issue ocean freight , airfreight and inland freight conveniently.

c。我们提供免费的发布运价的服务。您在注册后，可以方便的发布海，空，陆运的价格。

It's bell can reach over a meter in diameter.

它的身体最大可以达到直径1米多。

Now they are overdue and I shall have to pay a fine.

现在他们过期了，我不得不付罚款。