重叠

The analysis of our model shows that the overlapping stage reduces the time-to-market to some extent. The existing product with high performance contributes to the rduction of time to market, but not obviously; cannibalization rate wakens the ralation between the productivity of the overlapping stage and the optimal time-to-market, and the optimal duration of the overlapping stage respectively.

模型分析表明，重叠阶段只是在一定程度上缩短了新产品开发时间；基本产品性能的提高有助于缩短新产品的开发时间，但效果并不明显；成长率弱化了重叠阶段生产率与最优产品开发时间及重叠量之间的相关性。

According to the LC-P line of each of insecticide in the mixture and the formula of co-toxicity factor, several expected mortality and the region of additive action (expected mortality±20% expected mortality) were calculated, and according to observed mortality of mixture, the 95% confidence interval was calculated, LC-P line of expected mortality with the region of additive action and LC-P line of observed mortality with the 95% confidence interval were drawn, it was found that there was overlap between the region of additive action and 95% confidence interval and two lines crossed each other when co-toxicity coefficient was more than 100 and the co-toxicity factor was less than 20, which meant there was no significant differences between expected mortality and observed mortality, and that there was on or a few overlap between the region of additive action and 95% confidence interval when co-toxicity coefficient was more than 100 and the co-toxicity factor was more than 20 or co-toxicity coefficient was less than 100 and the co-toxicity factor was less than 20, which meant there was significant differences between expected mortality and observed mortality.

根据单剂的LC-P线和共毒因子公式，求出混剂的期望死亡率和"相加作用区间"（期望死亡率±20%期望死亡率），根据混剂的实测死亡率求出95%置信区间，画出期望LC-P线及"相加作用区间"和实测LC-P线及"95%置信区间"，发现当共毒系数大于100、共毒因子小于20时，实测LC-P线和期望LC-P线彼此交缠，期望LC-P线的"相加作用区间"和实测LC-P线的"95%置信区间"能高度重叠，表明两条LC-P线之间没有毒力差异；当共毒系数大于100、共毒因子大于20，或者共毒系数小于100、共毒因子小于-20时，实测LC-P线的"95%置信区间"和期望LC-P线的"相加作用区间"只有少量重叠或完全不重叠，体现出了实测LC-P线和期望LC-P线对供试害虫的毒力差异。

To accelerate the widespread of Synchronous Chip Seal and improve the operation quality of Synchronous Chipsealer, key techniques which influence the operation quality is studied detailedly, including the control of distributing quality, the dynamics characteristics of hydraulic system and the spray characteristics of asphalt nozzle of Synchronous Chipsealer.1 The factors which influence Synchronous Chip Seal quality are studied. Fiducial probability of simultaneous distribution density is advised to be used in evaluating the distribution bias and standard deviation of asphalt and aggregates simultaneously, which is more advanced than the single index evaluation method used before.2 The volume efficiency formula of asphalt pump is revised after analyzing the data of volume efficiency with mathematical statistics, which is helpful to match the asphalt spray system and control the flow out of asphalt pump accurately. With equation deduction and experiment, dynamic of hydraulic system used in Synchronous Chipsealer is studied, which lay the theory foundation on improving the stability and efficiency from design and controlling.4 Simulation on hydraulic system used in Synchronous Chipsealer is done with AMESim; the results indicate that multi-circle parallel connected hydraulic system with constant pressure power is better than that with load-sensing pressure power at present, because the latter will oscillate when the multi circles work at the same time. This conclusion has been proved during the debug of Synchronous Chipsealer.5 Asphalt nozzle characteristics, such as flat jet shape, flow distribution, are studied with experiment, the results indicate that cross quality of asphalt distributing is not increased linearly follow the increase of fan overlap level, the best point usually exists between two whole overlap level, asphalt distributing quality is better than±4% at the 2.5 overlap level, meets the superior specified in standard; The distribution quality of Synchronous Chipsealer can be increased by spray asphalt of different flow rang with nozzle of different diameter

为了加快同步碎石封层技术的推广，提高同步碎石封层设备的作业质量，本文对同步碎石封层设备作业质量的影响因素与控制方法、液压系统的动力学特性和沥青喷嘴的喷洒特性等关键技术进行了深入细致的研究：1研究了影响同步碎石封层作业质量的因素，提出了采用联合密度分布置信概率对同步碎石封层中沥青洒布量和碎石撒布量的系统偏差和标准差指标进行综合评价的方法，克服了传统评价方法只能对单一指标进行评价的缺陷；2采用数理统计的方法，研究了沥青泵的容积效率特性，修正了沥青泵容积效率公式，为沥青喷洒系统的匹配和沥青泵出口流量的精确控制提供了依据；采用数理方程推导与试验相结合的方法，研究了同步碎石封层设备液压系统的动力学特性，为从设计和控制的角度提高同步碎石封层设备液压系统的稳定性和效率奠定了理论基础；3运用AMESim软件对采用负载敏感控制和恒压控制的两种同步碎石封层设备液压系统进行仿真，结果表明：负载敏感控制的并联液压系统在多回路同时工作时，由于液压泵排量控制参考压力不稳定，容易引发液压系统振荡，恒压控制的并联液压系统是目前技术条件下比较理想的同步碎石封层设备工作装置驱动方案；该结论亦通过同步碎石封层设备装机试验得到了验证。4采用试验的方法对沥青喷嘴的喷洒特性进行了研究，结果表明：沥青洒布的横向精度并不是随着喷洒扇面重叠度的增加线性增加，其最高点通常出现在二个重叠度之间的"半重叠位置"，"2.5重叠"洒布时，沥青的横向洒布精度≤±4%，可以达到国家相关标准中的优级标准；同步碎石封层设备还可以根据不同洒布量情况下的流量需求，采用不同通径的喷嘴进行喷洒，提高沥青洒布精度。

This paper mainly discusses the overset mesh pre-processing technology, and supplies a new efficient and robust hole-cutting algorithm applied in the overset mesh preprocessing, which is based on maze algorithm and can be easily implemented with low complexity.

本文主要讨论重叠网格预处理方法，并提出迷路算法应用于"挖洞"过程，为重叠网格预处理提供了高效、可靠的"挖洞"方法，算法复杂度低，实现简单，健壮性好；在多层次嵌套重叠方面，引入了重叠网格主从关系图有效解决多层次嵌套重叠带来的问题；在提高找重效率方面，建立基于网格的kd树加快了找重过程。

The results showed that the height niche breadth of Litsea subcoriacea and Cinnamomum chekiangense in gaps and in non-gaps were the biggest. The height niche overlaps were greater between those species that had similar biological and ecological characteristics, and vice versa.

结果表明：桂北木姜子和浙江桂在林隙内外都占有较高的生态位宽度；生物学特性和生态学特性接近的树种高度生态位重叠较大，反之则较小；在林隙内，山矾和薄叶山矾的高度生态位重叠最大，而桂北木姜子和黄瑞木、尖叶水丝梨，浙江桂和尖叶水丝梨的高度生态位重叠较小；在非林隙内，山矾和黄瑞木的高度生态位重叠最大，桂北木姜子和尖叶水丝梨、黄瑞木的高度生态位重叠较小。

The overlapping domain decomposition method and nonoverlapping domain decomposition method is introduced for the Laplace problems.

介绍了求解Laplace方程的重叠和不重叠区域分解法，研究了重叠域大小与迭代收敛性的关系，比较了重叠和不重叠区域分解法的迭代次数。

It showed that the niche breadth and niche overlapping indexes of the enclosed grassland in 2007 are much lower than in 2006 as a whole; The niche breadth of Artemisia ordosica is bigger than other species in the region in 2002. In 2003, the dominant species were Artemisia ordosica and Salsola ruthenica. Their niche breadth indexes were 0.544 and 0.460 respectively. The results of niche overlapping in 2006 and 2007 also showed that the species with big niche breadth didn't always have big niche overlapping, and the niche breadth and niche overlapping did not have a positive direct linear relation.

结果表明：2007年封育区植物种的生态位宽度及种间的生态位重叠指数总体上较2006年有所降低；2006年黑沙蒿生态位宽度最大，达0.768，是06年封育区的优势种；2007年封育区的优势种为刺沙蓬和黑沙蒿，其生态位宽度值分别为0.544、0.460；2006年和2007的生态位重叠结果均表明，生态位宽度大的物种不一定和其他物种有大的重叠指数，较高的生态位宽度和较高的生态位重叠之间并不存在直接的线性关系；2006年、2007年较高的Pianka生态位重叠指数都出现在生态位宽度较小的物种之间。

In Chinese as an isolating language, and in Indonesian as an inflecting language, there are various forms of reduplications in the word classes of noun, verb, adjective, etc.

汉语和印尼语中都具有丰富多样的重叠形式和意义，包括名词重叠、动词重叠、形容词重叠等词类的重叠。

No immunostaining was seen in RPE. Double staining that Kir2. 1 and glutamine synthetase, Kir2. 1 and glutamine synthetase colocalized well. Intense Kir7. 1 immunolabeling was present on the apical surface of all RPE cells and appeared to extend over the length of the apical processes. Na〓, K〓-ATPase expression varied among RPE cells, but in highly expressing cells, it co-localized with Kir7. 1. Immunoreactivity of Kir2. 1、Kir4. 1 and Kir7. 1 acomplished by ABC immunohistochemistry in monkey and human retinae got the nearly same results as bovine.

间接免疫荧光组织化学显示，Kir2.1蛋白主要分布在Müller细胞与神经元相接触的细胞膜区域；与Müller细胞的特异性标记蛋白质抗谷氨酸合成酶抗体双重标记显示其分布特性重叠，在RPE未检测Kir2.1蛋白的免疫活性存在；Kir4.1蛋白集中分布于Müller细胞的内侧突起，与GS蛋白双重标记显示其分布特性重叠，RPE未检测Kir4.1蛋白的免疫活性存在；Kir7.1主要分布于RPE游离面及其突起的全长，与特异性标记RPE突起的Ezrin蛋白完全重叠，Na〓-K〓ATP酶在不同部位的RPE表达不同，Na〓-K〓ATP高表达的RPE细胞与Kir7.1的分布特性重叠。

The results showed that su-perinfection of viral hepatits E is common in Yangzhou region , which may be the reason for hepatic failure with the underlying HBV infection.

结果表明，本地区戊型肝炎以散发为主，重叠感染多见。HBV与HEV重叠感染和HAV与HEV重叠感染是较常见的感染模式。在HBV感染的基础上重叠HEV感染是肝炎重症化的重要原因。

The physiology of the skin machine body for the sake of the environment in the maintenance stability, but eject a body metabolism creation of metabolism thing BE'grease', summer perspire many various skin disease light or good, autumn perspire little metabolism thing metabolism don't go out, various skin disease made, this be the skin machine body of various burning disease.

皮肤机体的生理为了维持内环境稳定，而排出身体代谢产生的代谢物是'油泥'，夏天出汗多各种皮肤病就轻或好了，秋天出汗少代谢物代谢不出去，各种皮肤病就犯了，这就是皮肤机体的各种炎症。

If I had anything tender in me, I shot it dead.

如果我有什么招标的话，我枪死亡。