界面

Conclusion］1? It showes a higher stress dodge in the calcar femorale after using various kinds of prosthesis implantation? After using CFR/PSF of lower elastic modulus as handle, the stress dodge rate is lower in femur, but the interface stress is higher, and this is the main factor and reason for the prosthesis loosening? 2? The stress force rule meets the design principle that the stress force decreases gradually in the bone interface from proximal to distal? The stress value in different combination of same prosthesis handle has no significant difference, that showes mechanical factor is not the main standard for selecting prosthesis combination?

［结论］ 1、各种假体植入后均在股骨距处形成较高的应力遮挡，而用弹性模量较低的CFR/PSF作为柄，其股骨相应区域的应力遮挡率较低，但股骨相应界面应力较大，而界面应力过大是产生假体微动主要因素。2、股骨界面从近端至远端呈逐渐增高趋势的应力规律符合该假体的设计原理；相同假体柄的不同组合其股骨和髋臼相应界面应力值无明显差别，实验表明力学因素并不是选择假体组合的主要标准。

Batch mode, Command Line and GUI, each kind of UI style has been dominate in...

批处理界面、命令行界面和图形用户界面分别代表了三个时代中主流的用户界面。

The foundations of support vector machines are introduced. Four mathematics models of support vector classifications including linearly hard margin SVM, linearly soft margin SVM, non- linearly hard margin SVM and non-linearly soft margin SVM are discussed.

摘 要：介绍了支持向量机的基本思想，依据是否引入核函数，是否具有惩罚因子，支持向量分类算法被分为线性分界面硬间隔、线性分界面软间隔、非线性分界面硬间隔和非线性分界面软间隔四类，并讨论了它们的数学模型。

Finally introduces the define and realization of member variable and member function of class ...

文中首先对面向对象的概念，用户界面设计以及二者之间的关系进行阐述，提出运用面向对象的用户界面设计方法时遵循的原则，然后具体介绍空管辅助系统中用户界面的设计思想和具体的实现方法，最后给出一个主要的界面类———窗口类的成员变量和成员函数定义以及实现。

In the investigation of Cu-Zn-Al SMA, the influence of quenching speed, shape memory thermal treatment on SME, microstructure and morphologies was discussed. The changes in morphology and interfaces were in situ metallographic observed during thermal cyclings in order to control the degradation of two way shape memory effect . The stabilization of stress induced martensite variants method and the accordingly changes in microstructure were studied in detail. The mechanism was also compared between SSIM and TWME training method. From the above in situ observation results, the interface structure and especially the twin related A: B type variant pair were examined by HREM to clarify the role of movability of interfaces and the changes in variants orientation in inducing the degradation of the TWME. During developing the Ni-Ti-Hf SMA melt spinning ribbon, it was found the morphology and structure embodied the SME and was directly effected by chemical composition and technique factors, such as the different content of Hf, the speed of copper roller rotation and etc. Therefore, the morphology and structure were extensively examined.

在对Cu-Zn-Al形状记忆合金研究中，研究了提高记忆效应的热处理淬火速度、记忆热处理方式对Cu-Zn-Al形状记忆合金组织结构的影响；为了弄清双程记忆效应衰减的原因，原位动态观察了热循环过程中，合金组织形貌及界面的变化；因形状记忆合金必须经记忆训练才能具有双程记忆效应，系统地研究了应力诱发马氏体稳定化训练方法和这种方法引起的双程记忆合金组织结构的变化，比较了它与双程记忆效应训练方法诱发TWME机制的异同；因在原位动态观察中发现界面可动性及两侧变体取向的变化，伴随着记忆效应的衰减，用HREM详细研究了变体的界面结构，特别是A：B型变体界面结构及变体内部结构。

The interface between pure Mo and interphase is smooth cycle, and that between pure W and interphase is discontinue one. The boundaries between interphase and TiAl matrix in both composites are serrated in as-cast condition, and the serration disappeares and smooth interphase ring is formed after HIPing.

显微组织研究表明，TiAl/Mo及TiAl/W复合材料在铸态下界面层厚度不大，且大多在TiAl基体中形成和长大，靠近Mo纤维的界面为光滑的环状，靠近W纤维的界面为微观不连续界面，而双方的另一侧以锯齿状向TiAl基体延伸。

As an important aspect of the ergonomics, the human-computer interactions are being used in vast sum of products. One is IT products; the other is to software interface.

作为人机工程的重要方面，人机交互及人机界面出现在大量产品中，一类是数字产品的操作使用界面，如移动电话等；另一类是软件的操作使用界面，包括通过浏览器访问的网站界面等。

Applying the thermodynamic model, the temperature and the critical grain size of phase transformation can be predicted precisely for the nanocrystalline materials.

在应用界面膨胀模型和普适状态研究纳米晶界面热力学特性的基础上，发展了纳米晶整体材料热力学函数的计算模型，给出了以纳米晶界面上的原子分数作为权重的纳米晶体单相材料的焓、熵、自由能随界面过剩体积、温度以及晶粒尺寸发生变化的明确表达式。

To reduce the weak discontinuity or to make the interface micro-discontinuous are all beneficial to the enhancement of the capacity of the FGMs interface to resist impact fracture, i.e.

减小界面的弱间断程度或使 FGMs界面具备''微间断性''，都将利于提高功能梯度双材料界面抗冲击断裂能力，在一定程度上达到界面增韧的目的。

This dissertation was focused on the research about the formation and evolution of NQB from the Late Triassic to the early middle Epoch of Jurassic Period, including integrated analyzing the characteristic of the key stratigraphic surfaces, the time of the key stratigraphy, regional rock straigraphy, biostratigraphy and chronostratigraphy, sedimentary system and depositional facies. On basis of these analysis, a tectonic evolution model have been established for NQB during from the Late Triassic to the early middle Epoch of Jurassic Period.1. After the systematic surface analysis about main stratigraphy units, we found that:(1) the bottom of Xiaochaka formation was comformity with the middle Triassic in the basin, and in the north margin it was deposited and overlapped on the different period stratigraphy before Triassic.(2) The top surface of Xiaochaka formation developed regionally karst and paleo-karst breccia, and was uncomformity with Nadigangri Formation, these things suggest that NQB in Xiaochaka depositing stage was developed from middle Triassic basin, and then an extensive regression occurred, the deposition was over and erosion come into being.(3) The lithologic assemblage, geochemistry, mixed fossils, and stratigraphy overlapping characteristic of Quemocuo Formation in early middle Jurassic indicted that the uncomformity surface was an extension-unconformity.2. Integrated analysis about stratigraphy division and correlation indicted that:(1) the paleontologic assemblage of Xiaochaka formation show its time was Carian -Norian stage of late Triassic. According to it was overlapped by late Triassic Nadigangri Formation, so Xiaochaka formation should be Carian - early Norian stage.(2) the SHRIMP Zircon U-Pb age of Nadigangri formation volcanic rocks wear vary form 216 to 205 Ma, so its time should be Norian, but maybe extended into Rhaetian Stage.(3) The age of its bottom volcanic rocks, the fossil assemblages of its middle and upper members and overlapped by lower Jurassic, indicted the age of Riganpeicuo Formation was Norian - Rhaetian stage. And the same time, the volcanic rocks geochemistry of Nadigangri and Riganpeicuo formation both reflected that they wear formed in rift tectonic settings. The lower lithologic and surface characteristic, fossil assemblages and its upper maybe was conformity with lower Jurassic, all reflected that the age of Tumengela Formation in Tumen area should be Norian - Rhaetian stage.

论文对晚三叠世—中侏罗世早期盆地的形成与演化开展了研究，包括关键地层界面特征分析、关键地层时代归属分析、区域岩石地层、生物地层和年代地层的综合对比分析、区域沉积体系与沉积相分析、岩相古地理分析，最终建立晚三叠世—中侏罗世早期羌塘盆沉积—构造动力演化模式。1、系统的对各地层单元的界面分析发现：(1)肖茶卡组底界在盆地内部与中三叠统整合关系，在盆地北缘为沉积超覆于不同时代的前三叠系之上：(2)肖茶卡组顶界面发育古岩溶角砾岩，与上覆那底岗日组为岩溶不整合接触，说明肖茶卡组沉积时期的羌塘盆地是在早中三叠世的盆地基础发展起来的，后期出现了广泛的海退事件，使盆地结束沉积并遭受风化剥蚀作用；(3)中侏罗统雀莫错组的岩性组合特征、岩石化学特征、古生物化石混积和地层的沉积超覆现象均表现出裂陷环境下形成的伸展不整合面的特征。2、综合地层划分与对比分析认为：(1)肖茶卡组古生物化石组合反映其时代为晚三叠世卡尼期—若利期，根据其上被上三叠统那底岗日组不整合覆盖，将其时代厘定为卡尼期—若利期早期；(2)那底岗日组火山岩SHRIMP锆石U-Pb年龄在216～205 Ma之间，其时代主要为若利期，可能包含有瑞替期：(3)日干配错组底部火山岩的年龄、中上部化石组合及其被下侏罗统整合覆盖，综合反映的时代为晚三叠世若利期—瑞替期，而且那底岗日组火山岩和日干配错组火山岩的地球化学成分分析反映两者均为引张构造背景下的产物；土门地区的土门各拉组的下部岩性及界面特征、化石组合和上部可能被下侏罗统整合覆盖，综合反映其时代为若利期—若利期。

He and Nina moved to California and lived at 2005 Ivar Street, Apt.

他和Nina搬到加州，并在2005年伊瓦尔街，公寓生活。

Droperidol （ potently inhibits transfected HERGchannels and this is the probable mechanism for QT prolongation.

氟哌利多有效地抑制了转染的 HERG 钾通道，可能是 QT 间期延长的机制。