回转的

BZZ heavy cantilever crane is scheduled column cantilever crane extension products, the aircraft using the rotary bearing structure with variable cross-section arm, from the kind of up to 2.5-16 meters radius of gyration of 7-12 meters.

BZZ重型悬臂起重机是定柱式悬臂起重机的延伸产品，该机采用了回转支承与变截面臂结构，起种高达2.5-16米，回转半径达7-12米。

Based on the analysis to crankshaft-working system and turning/feed system for cold pilger mill and radio of two turning angles, the system is designed with computer.

本文通过对双回转送进二辊冷轧管机的曲轴机架与回转系统进行分析，以保证工作行程和轧件两次回转角分配比为设计前提，按照回转凸轮轮廓曲线的两过渡段的峰值加速度相等的设计准则，计算曲轴-机架与回转系统，实现了系统的最优化的设计。

If the kiln should stop to Overhaul, work should be down, and make a heavy economic loss. As a part of kiln measure, the kiln"s ovality measure can reflect the status of kiln"s firebrick and shell.

作为水泥回转窑检测的一部分，椭圆度的测量，可以很好的反映出水泥回转窑的衬砖和筒体状况，从而对回转窑的运转情况，提供一个很好的指导数据。

The discrete mathematical models of the roundness and cylindricity EST are established; the mathematical models of the generating line straightness, axis straightness, coaxality, circular run—out and total run—out error of the revolution workpiece are put forward and established first based on the EST; the method about how to sample and to process sampling data are given when these models are applied to measure workpleces.

其主要内容是：针对长期以来国内对回转误差运动的有关定义的争论，对回转误差运动的本质进行了讨论，进一步明确了静心与静轴，动心与动轴的概念，并对此进行了数学推导，给出了相应的数学模型；统一了"平动说"和"瞬心说"关于回转轴线的定义，指出了两种学说各自的力学基础和它们的一致性。

Derives the formulae for calculating the distortion and stress on the acting surface of flexspline load in the drive process of the harmonic gear drive with three-wave wavegenerator;(2) analyzes and compares the performance of plastic and steel products under light load drive and calculates the probably reached limit of drive ratio for both types of flexsplines under the same load;(3) applies the harmonic gear drive with three-wave wavegenerator to the small-sized multiple-revolution electric device of valves by taking into consideration of the low limit of the drive ratio for the harmonic gear drive with three-wave wavegenerator made of plastics, improves the design on the main drive mechanism of the traditional small-sized multiple-revolution electric device of valves, and validates through examples the feasibility for the harmonic gear drive with three-wave wavegenerator made of plastics to be applied to the small-sized multiple-revolution electric device of valves. Finally the author performs calculations on the two types of the flexsplines of the harmonic gear with three-wave wavegenerator by using the finite element method and analyzes the causes for the errors.

本文根据三波谐波齿轮传动的运动变形特点，采用弹性薄壳的力矩理论，推导了三波谐波齿轮传动柔轮载荷作用面上的变形及应力计算公式；分析比较了轻载传动情况下塑料和钢材的性能，计算了塑料制谐波柔轮和钢制谐波柔轮在相同载荷情况下可能达到的传动比极限；对塑料制及钢制三波谐波齿轮柔轮进行了有限元计算，分析了产生误差的原因；针对三波塑料谐波齿轮传动比极限低的特点，将之运用于小转矩多回转阀门电动装置中，对传统的小型多回转阀门电动装置的主传动机构进行了改良设计，并通过实例验证了三波塑料谐波齿轮传动在小转矩多回转阀门电动装置中应用的可行性。

First, this article introduced 2 grade of rotary kiln principle of work and the equipment, to rolled the circle mechanics behavior to carry on the analysis, proposed - rolled the circle - under roller's rotary kiln overall modelling based on the tube body - kiln liner - big tooth ring, to rolled the circle - under roller's contact stress to carry on the finite element analysis the method, and obtained rolled the circle contact stress the size and the distribution rule, finally indicated that rolled the circle contact stress mainly to have two main peak values and the sudden change in one week, appeared is rolling the circle and the under roller contact area; Then, rolls the circle the stress to regard as is the principal stress unknown plane stress test, the use quite mature modern test technology, proposed rolls the circle stress test the principle and the plan, and to rolled the circle the stress to carry on the scene test, the stress which the scene test analysis result and the finite element analysis calculated has compared, had proven the whole method modelling's finite element analysis method's rationality and rolled the circle - under roller contact stress the result accuracy; Finally, uses ANSYS APDL the re-development technology, in view of 2 grades of rotary kilns, rolled the circle - under roller contact stress the overall finite element analytic method to carry on the re-development.

首先，本文介绍了2档回转窑工作原理和装置，对滚圈的力学行为进行了分析，提出了基于筒体-窑衬-大齿圈-滚圈-托轮的回转窑整体建模，对滚圈-托轮的接触应力进行有限元分析的方法，并得到了滚圈接触应力的大小和分布规律，结果表明滚圈接触应力在一周内主要存在两个主要的峰值和突变，都出现在滚圈与托轮接触区域；然后，把滚圈的受力看成是主应力未知的平面应力的测试，利用比较成熟的现代测试技术，提出了滚圈应力测试的原理和方案，并对滚圈的应力进行了现场测试，现场测试分析结果与有限元分析计算出的应力相比较，证明了整体法建模的有限元分析方法的合理性和滚圈-托轮接触应力的结果的正确性；最后，利用ANSYS的APDL的二次开发技术，针对2档回转窑，就滚圈-托轮接触应力的整体有限元分析法进行了二次开发。

Firstly, the paper introduced the working principle and device of the two-pass grate-rotary kiln and had an analysis method of mechanics of the tyre. We have put forward the finite element analysis of the contact stress of the tyre-roller based on the whole construction mode of shell-kiln liner-large gear-tyre-roller of the rotary kiln and obtained the strength and distributing rule of the tyre's contact stress. The research shows that within one week the contact stress mainly lies in two leading peak value and catastrophe which appear at the contact zone of the tyre and supporting roller. Then we regarded the tyre's stress as the test of unknown plane stress of principal stress. Utilizing mature and modern testing technology, we raised the testing principle and scheme of tyre stress and then had a on-the-spot test of the stress. Comparing the analysis result of the test with the one calculated from the finite element analysis, it proofed the rationality of finite element analysis method of integral modeling and the correctness of the contact stress result of the tyre and roller. Finally, for two-pass of similar rotary kilns, using the ANSYS APDL re-development technology, carried on the re-development about the overall finite element analytic method of thecontact stress of tyre-roller.

首先，本文介绍了2档回转窑的工作原理和装置，对滚圈的力学行为进行了分析，提出了基于筒体-滚圈-托轮的回转窑整体建模的有限元分析法，来对滚圈-托轮的接触应力进行有限元分析与计算，得到了滚圈接触应力的大小和分布规律，并求得滚圈外中内圈节点的主应力；其次，把滚圈的受力看成是主应力未知的平面应力的测试，利用现代测试技术，提出了滚圈主应力测试的原理和方案，并对滚圈的主应力进行了现场测试，现场测试分析结果与有限元分析计算出的主应力相比较，证明了整体法建模的有限元分析方法的合理性和滚圈-托轮接触应力结果的正确性；最后，利用ANSYS的APDL的二次开发技术，针对2档同类回转窑，就滚圈-托轮接触应力的整体有限元分析法进行了二次开发。

The discrete mathematical models of the roundness and cylindricity EST are established; the mathematical models of the generating line straightness, axis straightness, coaxality, circular run—out and total run—out error of the revolution workpiece are put forward and established first based on the EST; the method about how to sample and to process sampling data are given when these models are applied to measure workpleces.

其主要内容是：针对长期以来国内对回转误差运动的有关定义的争论，对回转误差运动的本质进行了讨论，进一步明确了静心与静轴，动心与动轴的概念，并对此进行了数学推导，给出了相应的数学模型；统一了&平动说&和&瞬心说&关于回转轴线的定义，指出了两种学说各自的力学基础和它们的一致性。

Moreover, taking the adsorption process from oven-dry state to the equilibrium state in 20℃,60%RH environment as an example, the dielectric relaxation based on the reorientation of adsorbed water molecules was separated out from that based on the methylol groups in the amorphous region of wood cell wall.

以绝干状态→20℃，60%RH 平衡态的吸湿过程为例，将基于吸着水分子回转取向运动的介电弛豫与基于木材无定形区中伯醇羟基回转取向运动的介电弛豫进行分离，并在 Eyring 的绝对速度反应论的基础上，求得了与吸着水分子进行回转取向运动相关连的热力学量，得到了在吸着过程中吸着水分子与木材吸着点之间的氢键结合随着水分吸着进程的变化情况。

Database of physical and chemical properties for solid wastes were constructed through investigation for single typical component and their mixture of solid wastes. The particulate trajectory model and heat transfer model were developed, based on the studies of Characteristics of solid wastes movement and heat mass transfer in rotary kiln. Pyrolysis experiments of solid wastes in lab and pilot scale rotary kiln pyrolyzers were performed. Mechanism of pyrolysis for typical solid wastes was analyzed. The characteristics of pyrolytic products, such as physical and chemical properties, composition and combustibility, etc, were investigated. A neural network model for the prediction of yields and properties of pyrolysis products was developed. Then, the potential applications of pyrolytic products and the substitution of pyrolytic fuels for corresponding commercial furls were investigated. The optimization of energy recovery and utilization for different wastes through pyrolysis was analyzed.

通过对典型固体废物组分及其混合物特性的分析，建立了固体废物的化学特性分析数据库，并据此进行了物理分类；对固体废物在回转窑内的运动和传热特性进行了研究，建立了固体物料的随机颗粒滚动理论模型和传热模型；在小型和中试回转式热解炉上进行了实验；对各种典型固体废物在回转窑内的热解机理和主要热解产物的性质进行了研究；利用神经网络等方法建立了各典型固体废物的热解产物的产率及特性的数学预测模型；对固体废物热解产物的物性、成分、燃烧特性等开展了研究，分析了其与现有商业燃料匹配的可能性；对热解产物的多种应用性能进行了研究，对不同废物热解中的能源回收和利用进行了优化分析。

Cynanchum Lingtai apricot production in the average weight 65 grams, the brightly-colored fruit, juicy rich, sweet-sour taste, sweet from the nucleolus, when the late Qing Dynasty famous Shaanxi, Gansu provinces, the Qing imperial court Tongzhi tribute for years.

灵台生产的牛心杏平均单果重65克，果实色泽鲜艳，汁多味浓，甜酸适口，离核仁甜，清末时就驰名陕、甘两省，清同治年间曾为朝廷贡品。

Chenopodium album,Solanum nigrum, and Amaranthus retroflexus were very susceptible to the herbicides. Polygonum persicaria and Abutilon theophrasti were relatively less susceptible to the herbicides, and Lycopersicon esculentum was not susceptible to it. The relationship between reduction rates of weed biomass and PPM values of weed leaves 2,4, and 6 days after treatment was established.

供试的6种杂草对该混剂的敏感性存在显著差异：红心藜Chenopodium album、龙葵Solanum nigrum和反枝苋Amaranthus retroflexus对该混剂最敏感，ED90值分别为47.65、71.67和29.17g/hm2；春蓼Polygonum persicaria和苘麻Abutilon theophrasti敏感，ED90值分别为96.91、114.20g/hm2；而番茄不敏感。