可跟踪的

We analyzed and proved that this kind of mounting can cover all useful sky area and has much lower and smoother angular velocity and acceleration than the altazimuth one. IN THIS PAPER WE ALSO DISCUSSED THE RELATIONSHIP BETWEEN TWO MOST OFTEN USED ALT-ALT coordinate systems (SN-ALT-ALT, EW-ALT-ALT coordinate system) and the sidereal hour-angle coordinate system, the horizon coordinate system.

本文推导了ALT-ALT跟踪机架光电人卫跟踪仪原理，分析证明了它在要求的跟踪区域内不存在观测盲区，对同一目标的跟踪角速度和角加速度比地平式机架跟踪仪小且平滑，可实现全天覆盖。

The design of the seam tracking sensor is the key work in the realization of the welding automatization. A novel touch photoelectric sensor for seam tracking was designed on the base of getting over the shortcoming of non-touch seam tracking sensor and using the principle of the photovoltaic translation. The idler pulley can touch the seam closely, then the sensor can realize the auto-tracking by the oriented function of the groove. If the offset of the idler pulley location appear, the sensor can change the offset to the voltage using the cell of the photovoltaic translation and the cell of signal processing.

焊缝跟踪传感器的设计是焊接自动化实现过程的重要环节，在此克服非接触式焊接跟踪传感器易受干扰的缺点，利用光电转化的原理，设计了一种新颖的接触式光电焊缝跟踪传感器，该传感器利用特制导轮与坡口紧密接触，依靠坡口的机械导向作用实现焊缝自动跟踪，当导轮位置发生偏移，利用光电转换单元以及信号处理单元，可将偏移位移转化为模拟电压量。

The resulting algorithm can be used to tracking the motion of both rigid and nonrigid objects.

算法除可用于跟踪刚体运动之外，也可用于非刚体运动的跟踪。

In fact, the control problems of the sonar array posture are track control problems. So On the basis of theoretic study, the author designs the robust output track control of the posture of the sonar base with regulable parameter and applies the study results of measurable disturbance decoupling and robust output track to the minehunting sonar array posture control, a robust control strategy with disturbance decoupling, output track and compensation for uncertainty is found.

猎雷声纳基阵的姿态控制问题实质上是跟踪控制问题，在进行理论研究的基础上，作者设计了具有可调参数声纳基阵姿态鲁棒输出跟踪控制系统，并基于反馈线性化方法将可测干扰解耦研究结果与鲁棒输出跟踪研究结果相结合，形成了同时具有干扰解耦、输出跟踪和不确定性补偿的猎雷声纳基阵鲁棒控制策略。

In order to solve the problem of path tracking for 3-DOF mobile robot with two drivable and steerable wheels, The path-tracking control algorithm is investigated via fuzzy control technique which realizesd independent tracking of position between orientation of mobile robot and enhances the real-time characteristics of tracking control.

针对具有两个可操舵驱动轮的 3自由度移动机器人的轨迹跟踪问题，利用模糊控制技术设计了路径跟踪控制器，实现了移动机器人的位置和方位的独立跟踪，同时提高了跟踪控制的实时性。

According to the wire electrode on the trajectory of the different forms of control, WEDM can be divided into three types:* is a copy-control, cutting their lines in advance to create the shape of the workpiece and the same mode *, When the rough machining parts and die at the same time * Clamping in the machine tool table, in the process of cutting wire electrode tightly * close to the edge of model for mobile track, thus cutting out the model * with the same shape and precision to work; another One is the optical tracking control, the cutting in line before the first parts in accordance with drawings by a certain ratio of enlarge depicts an electro-optical tracking maps, drawings will be processed when the machine electro-optical tracking placed on the stage, followed on the stage The first photo has to follow the ink line graphics track movement, and then through the use of electrical, mechanical linkage to control the machine tool table work together with the relative electrode wire Xiang Sixing do sports in order to cut out the pattern and shape of the workpiece to the same; a re - Is a digital process control, advanced digital automatic control technology, machine-driven process in accordance with the geometry of the workpiece before the parameters of good pre-processing CNC automatic completion of the processing, production do not look like without drawing board also plans to enlarge, in front of more than two Control in the form of higher precision processing and broad scope of application, at home and abroad for more than 95% of WEDM have been using digital technology.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是*模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的*模，加工时把工件毛坯和*模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着*模边缘作轨迹移动，从而切割出与*模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95％以上的电火花线切割机床都已采用数控化。

Best price/quality correlation of service.- Sending your order in 24 hours with 100% guarantee, by providing free reshipping.

该系统可让您一个完美的方式来管理您的制衡，地方的订单，让您的眼睛上的地位的订单和跟踪的。

The fixed plan should be sent to the PAPs including: compensation standard and way of calculation; assistance for resume income; process of complaint and grievance.

咨询之后，补偿计划要以可送达的方式分发给受影响人群。分发给受影响人群的信息包括：各类受影响资产的补偿费；可能提供的所有其它方式支持的合格性标准；和申诉程序(包括申诉起始和跟踪的具体联系信息)。

Wire electrode based on the trajectory of the different forms of control, WEDM can be divided into three types: one is shaped by the imitation controlled cutting in line in advance and work to create the same shape by mold, when processing the workpiece at the same time rough and on the mold clamping in the machine tool table, in the process of cutting wire electrode tightly against the mold on the edge of the track for the mobile, thus cutting out and die on the same shape and precision to the workpiece; another One is the electro-optical tracking control, to carry out the cutting line, before the basis of certain parts to enlarge the proportion of drawings depicts an electro-optical tracking map-processing machines will be placed in design stage of electro-optical tracking, tracking platform Photoelectric first line of graphics has always been to follow the track of the Mexican campaign, and then through the use of electrical, mechanical linkage to control the machine tool table, together with the workpiece so相似形wire electrode relative movement, thus cutting out the same shape and design to the workpiece; again a digital control, the use of advanced automatic control of digital technology-driven machine tool in accordance with the pre-processing parameters according to the workpiece geometry pre-processing procedures for the preparation of a good CNC auto-complete processing, the production does not require appearance on board the need to map to enlarge map of the previous two form of control has a higher machining accuracy and a broad range of applications, both at home and abroad more than 95% have adopted WEDM NC.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是靠模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的靠模，加工时把工件毛坯和靠模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着靠模边缘作轨迹移动，从而切割出与靠模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作靠模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95%以上的电火花线切割机床都已采用数控化。切割属电加工范畴，是由前苏联人发明的，我国是第一个用于工业生产的国家，当时由复但大学和苏州长风机械厂合作生产的这是最早的机型叫复旦型，我们国内在此基础上发展了快走丝系统。欧美和日本发展了慢走系统LS

Electronic telephone pad is the "front-end" for your core database (every time a person calls, your core database is updated); Electronically track the in/out status of your staff and create automated integrated "find-me" exceptions; Business teams can deposit automated messages to potential callers to coordinate activities; Track your library books, files, documents and clients/customers/students/patients; Computer-generated automated e-mail notices for to-do items, which can be sent over the Internet to clients/customers/students/patients; Send automated integrated mass electronic mailings with a touch of a button.

电子电话垫是&前端&为您的核心数据库（每一次一个人的来电，您的核心数据库进行更新）；电子跟踪输入/输出的地位，您的工作人员和创建自动化集成&找到我&的例外情况；业务团队，可存款的自动邮件潜在的来电，以协调活动；追踪您的图书馆的图书，档案，文件和客户端/客户/学生/病人；计算机生成的自动电子邮件通知到办项目，可以通过互联网发送到用户端/客户/学生/病人；寄出自动的大规模综合电子邮购与用户只需轻触一个按钮。

Chrysanthemum of 10 thousand birthday is lax to edaphic requirement, with the arenaceous qualitative loam with fecund, good drainage had better.

万寿菊对土壤要求不严，以肥沃。排水良好的砂质壤土为好。

He unstepped the mast and furled the sail and tied it.

他拔下桅杆，把帆卷起，系住。