压缩气体

Inside the clear crystal capsule, a combination of gas and liquid ethyl chloride expands into the chamber as the temperature rises, which compresses the internal spring.

在这个清晰透明的壳子里，液氯乙烷和气体的混合物在气温上升时进入密闭容器，从而压缩内部的弹簧。

Both of them adopt mix gas of CO_2 (98%) and PH_3 (2%) as fumigant which compressed in the cylinder. The system can kill all insects at each stage through long time fumigation at a low concentration.

二者均采用压缩在钢瓶中的98％CO_2和 2％PH_3混合气体作为熏蒸剂，对粮仓进行低浓度长时间的熏蒸，以达到全部杀死各阶段粮食害虫的目的。

Both of them adopt mix gas of CO_2 (98%) and PH_3 (2%) as fumigant which compressed in the cylinder. The system can kill all insects at each stage through long time fumigation at a low ...

二者均采用压缩在钢瓶中的98％CO_2和 2％PH_3混合气体作为熏蒸剂，对粮仓进行低浓度长时间的熏蒸，以达到全部杀死各阶段粮食害虫的目的。

Linde tested the process of sucking the gas out of the balloons, compressing it and later purifying it for resale last year.

林德测试的过程中吸出的气体的气球，将它压缩，后来为净化去年转售。

Gases and liquids are perfectly elastic, after their being compressed they return to their original volume as soon as the applied force is removed.

气体和液体是很有弹性的。在它们受压缩以后，当施加的力一移走，它们就马上恢复原来的体积。

The gas is stored under pressure in the tank.

该气体在压缩状态下贮存于罐中。

The gas is stored under pressure in the tank .

该气体在压缩状态下贮存於罐中。

The axisymmetric compressor characteristic and the reciprocal time-lag parameters of blade passage have crucial effect on the recoverability of compression systems.

而且压气机的轴对称特性和反映压气机内气体惯性、粘性等时滞影响的α参数等对压缩系统退出旋转失速流型的滞后性有比较大的影响。

The shock absorption device absorbs the shock of shell from the compressing mechanism through gas expelling pipe and thus reduces the shock noise of compressor effectively.

所述减震部件吸收通过气体排出管从压缩机构传送到外壳的震动，由此有效地降低压缩机的震动噪音。

Moreover, the hot compressive deformation behavior of the RS/PM AZ91 magnesium alloy and AZ91 alloy matrix composite were also investigated, the conclusions are drawn as follows:1. The processing parameters of the atomization-twin rolls quenching technology were optimized as follows: the diameter of the nozzle 1mm, the wheel velocity 25m/s, the pressure of atomization gas 0.3MPa and Ar gas for melt injection 0.1MPa. The RS AZ91 alloy flakes exhibited fine and uniform microstructures. When the flakes were extruded at 673K, extruded velocity of 0.1mm/min and extrusion ratio of 25:1,the magnesium alloy rods with clean surface, uniform dimension and excellent mechanical properties were obtained.2. The RS AZ91 magnesium alloy powders prepared by atomization-twin rolls quenched technology exhibited fine equiaxed grains with the grain size of 1-3μm, the phase constituent included supersaturate solid solution phaseα-Mg and miner fineβ-Mg_(17)Al_(12) phase. The as-extruded materials also exhibited equiaxed grains with the size of 5-7μm and a large number of fineβ-Al_(12)Mg_(17) and fewer AlMg_2Zn phases were detected in the alloy.

本文还研究了快速凝固/粉末冶金AZ91镁合金热压缩变形流变应力行为，快速凝固/粉末冶金法原位生成Mg_2Si增强AZ91镁基复合材料，经过系统的研究，获得如下结论：1、雾化-双辊急冷法在下列工艺参数组合下：双辊线速度25m/s；喷嘴直径1mm；熔体压射压力0.1MPa；雾化气体压力0.3MPa。，可获得宏观尺寸细小、微观组织均匀细小、综合性能优良的的快速凝固AZ91镁合金细碎箔带，快速凝固箔带在挤压温度为673K、挤压速度为0.1mm/min，挤压比为25：1时，可获得的外表光洁、尺寸均匀、组织性能优异的镁合金棒材。2、雾化-双辊急冷法制备的AZ91镁合金粉末态为细小等轴晶组织，晶粒尺寸1-3μm，组织为α-Mg过饱和固溶体和微量的细小β-Mg_(17)Al_(12)相组成；粉末挤压棒材为等轴晶组织，晶粒尺寸5-7μm，组织中含有大量细小的β-Al_(12)Mg_(17)以及AlMg_2Zn析出相，室温力学性能，抗拉强度383MPa，屈服强度275MPa，断后伸长率7.5%。

What are your goals and strategies for growth?

你的成长目标和策略是什么？

And unto the angel of the church in Sardis write; These things saith he that hath the seven irits of God, and the seven star I know thy works, that thou hast a name that thou livest, and art dead.

3：1 你要写信给撒狄教会的使者，说，那有神的七灵和七星的，说，我知道你的行为，按名你是活的，其实是死的。