查询词典 sample case

Factors influencing the tensile strength of polymerizer head sample were introduced,which included the sampling position,sampling direction,sampling quantity and the cross section shape of sample.

介绍了影响聚合釜封头试样拉伸性能的因素：取样部位、取样方向和取样数量及试样的横截面形状。

The result also showed that the heat-treatment temperature and time had great influence on the electrochemical property of the sample, the performance of the sample was better when it was heat-treated for 20 hours at 120℃.

另外，研究结果表明，样品的热处理温度与时间对样品的电化学性能有较大的影响，在120℃热处理20h的样品性能稳定。

2The top sample of acetaldehyde column is 98% acetaldehyde production. Thebottom sample is the mixture of ketone and alcohol.

乙醛塔：塔顶得到纯度为 98％的乙醛产品，塔釜为醇﹑酮混合物。

Chemical and microbiological compositions of 12 samples of traditionally home-made koumiss in Xingjiang Uighur Autonomous Region were determined. The average contents of fat, protein, lactose, ash, calcium and phosphorus were 2.07g/100mL, 2.22g/100mL, 3.03g/100mL, 0.28g/100mL, 82.27mg/100mL and 58.20mg/100mL respectively. On average, pH was 3.90, titratableacidity was 134.25°T, lactic acid content was 10.99g/L, acetic acid content was 1.50g/L, citric acid content was 0.09g/L, ethanol content was 14.94g/L. The counts of lactic bacteria in 10 samples were 1.07～9.70×107cfu/mL, 1 sample was 1.38×108cfu/mL, another sample was 2.06×106cfu/mL; the counts of yeast in 1 samples was 3.20×104cfu/mL, 5 samples were 1.80～6.60×105cfu/mL, and 6 samples were 1.06～2.72×106cfu/mL. 33 strains isolated from 12 samples of traditionally home-made koumiss collected from Xingjiang Uighur Autonomous region belonged to Lactobacillus.

本项研究，对采集于新疆伊犁哈萨克族自治州、博尔塔拉蒙古族自治州和巴音郭愣蒙古族自治州 3 个地区的 12 份酸马奶样品，进行了化学和微生物组成分析，并对从中分离到的 33 株杆菌分离株，进行了属种鉴定，同时还对耐酸性菌株进行了初步筛选，结果表明： 12 份酸马奶样品的脂肪平均含量为 2.07g/100mL ，蛋白质平均含量为2.22g/100mL，乳糖平均含量为 3.03g/100mL，灰分平均含量为 0.28g/100mL，钙平均含量为 82.27mg/100mL，磷平均含量为 58.20mg/100mL；pH 值平均为 3.90，酸度平均为 134.25oT，乳酸平均含量为 10.99g/L，乙酸平均含量为 1.50g/L，4 份未检出，8 份柠檬酸平均含量为 0.09g/L，乙醇平均含量为 14.94g/l；1 份乳酸菌数为1.38×108cfu/mL，1 份为 2.06×106cfu/mL，其余 8 份在 1.07～9.70×107cfu/mL 间；1份酵母菌数为 3.20×104cfu/mL，5 份在 1.80～6.60×105cfu/mL 间，6 份在 1.06～2.72×106 cfu/mL 间。

The yield and purity of each DNA sample was tested by UV-spectrophotometer, the integrality of these DNA samples were run electrophoresis on the agarose gel. Each DNA sample was subjected to PCR amplification and hybridization using One lambada rSSO HLA-A,-B and -DRB1 commercial kit, the fluorescent intensity for positive bead and negative bead hybridized with HLA-A,-B and -DRB1 PCR products were calculated and analyzed.

使用2ml深孔板和TECAN DNA全自动工作站，从288份骨髓捐献者样本中提取基因组DNA；提取的DNA样本用紫外分光光度仪测定其浓度和纯度，并采用琼脂糖凝胶电泳检测DNA的完整性；DNA样本用One lambda rSSO HLA-A、B和DRB1基因分型试剂盒进行PCR扩增、分子杂交和Luminex流式磁珠分析仪检测，统计分析每一DNA样本HLA-A、B和DRB1基因扩增产物经DNA探针分子杂交后的阳性磁珠和阴性磁珠的荧光信号强度。

Based on the magnetic field calculation some parameters of the sample motor such aselectromotive force with no load, leakage coefficient with no load and magnetictorque are calculated and influence on the parameters that is caused by the change ofthe structure of the sample motor is also discussed.

在电磁场计算的基础上，进行了电机空载反电势，空载漏磁系数，电磁转矩等相关参数的计算，讨论了横向磁通永磁同步电动机的结构变化对参数的影响。

The impact load was applied to explosive JO9159 and its simulation material sample by light gas gun to make damage, the impact pressure of the sample was measured by manganin gauge.

文中利用轻气炮驱动飞片加载技术对JO9159炸药及其模拟材料样品进行了冲击加载，使其产生损伤，利用锰铜压阻计测量了试件的冲击压力。

Chlorine in the sample solution was indirectly determined by mercury thiocyanate spectrophotometry. The results are in good agreement with those from other methods with precision of 1.74%RSD (n=6) for the sample with 1.08% chlorine.

方法用于实际样品的分析，结果与其他方法测定值一致，误差均在允许范围内；对氯含量为1.08%的样品重复测定6次，精密度为1.74%。

From the sample volume and the distances to the first and second equivalence points, calculate the MOLARITIES of hydrochloric and phosphoric acids in the sample.

从样品的体积以及第一次和第二次等当点的差异，计算样品中氢氯酸和磷酸的莫耳浓度。

MAX1999EEI Pinout: 8- to 32-bit and 16- to 32-bit word packing options Programmable wait state options: 2 to 31 CCLK Digital audio interface includes six serial ports, two pre- cision clock generators, an input data port, three programmable timers and a signal routing unit Serial ports provide: Six dual data line serial ports that operate at up to 50 Mbits/s for a 200 MHz core on each data line each has a clock, frame sync, and two data lines that can be configured as either a receiver or transmitter pair Left-justified sample pair and I2S support, programmable direction for up to 24 simultaneous receive or transmit channels using two I2S compatible stereo devices per serial port TDM support for telecommunications interfaces including 128 TDM channel support for telephony interfaces such as H.100/H.110 Up to 12 TDM stream support, each with 128 channels per frame Companding selection on a per channel basis in TDM mode Input data port provides an additional input path to the DSP core configurable as either eight channels of I2S or serial data or as seven channels plus a single 20-bit wide syn- chronous parallel data acquisition port Supports receive audio channel data in I2S, left-justified sample pair, or right-justified mode Signal routing unit provides configurable and flexible connections between all DAI components, six serial ports, an input data port, two precision clock generators, three timers, 10 interrupts, six flag inputs, six flag outputs, and 20 SRU I/O pins Serial peripheral interface Master or slave serial boot through SPI Full-duplex operation Master-slave mode multimaster support Open drain outputs Programmable baud rates, clock polarities, and phases 3 Muxed Flag/IRQ lines 1 Muxed Flag/Timer expired line ROM based security features: JTAG access to memory permitted with a 64-bit key Protected memory regions that can be assigned to limit access under program control to sensitive code PLL has a wide variety of software and hardware multi- plier/divider ratios JTAG background telemetry for enhanced emulation features IEEE 1149.1 JTAG standard test access port and on-chip emulation Dual voltage: 3.3 V I/O, 1.2 V core Available in 136-ball BGA and 144-lead LQFP packages Lead free packages are also available

MAX1999EEI引脚说明： 8 - 32位和16 - 32位字包装选择可编程等待状态的选择：2至31个CCLK数字音频接口包括6个串行端口，两个前643时钟发生器，输入数据端口， 3可编程定时器和一个信号路由单元串行端口提供：六双串口数据线，在高达50 Mbps的操作/为200兆赫的每个数据行每个人都有一个时钟，帧同步的核心秒，和两个数据可以作为任何一个接收器或发射器对左对齐和I2S配对样本的支持下，最多可同时接收或传送24个频道，每使用两个系列的I2S兼容立体声设备配置可编程方向线；港口的TDM通信接口，包括支持128个电话接口的TDM的渠道，如H.100/H.110支持多达12个的TDM流的支持下，每帧128个频道每个压缩扩展每通道的基础上选择在TDM模式输入数据端口提供了一个额外的输入路径的DSP核心配置为I2S或串行数据或7加一个20位宽的SYN -异步的并行数据采集接口通道或8通道；支持接收通道I2S音频数据，左对齐样本对，或右对齐模式信号路由单元组件之间提供所有戴配置和灵活的连接，6个串行端口，一个输入数据端口，两个精密时钟发生器，3个定时器，10个中断，六旗投入，产出6个旗，20曼谷南南区域股的I / O管脚串行外设接口的硕士或奴隶通过SPI串行启动全双工运作主从模式多主机支持开漏输出可编程波特率，时钟极性和第三期合并调制旗/ IRQ线路1合并调制旗/定时器过期线光盘的防伪特征：JTAG的访问与64位受保护的关键允许内存内存可分配给程序访问控制的限制下对敏感地区有一个代码锁相环/遥测分比率为背景的JTAG仿真功能增强的IEEE 1149.1 JTAG标准测试访问端口的软件和硬件多钳各种各样和片上仿真双电压：3.3六/输出，可在1.2 V核心136球BGA封装和144引脚LQFP封装无铅封装，也可

For the head-teacher of the class said that I had seriously broken the school rules,which led me to a three-day suspend class.

为什么呢？因为我的班主任说我严重的违反了校规，于是让我停课三天。

Many of them believe that the conversion of thousands of working-class folk in England spared that nation from the mass carnage and the tyranny that came with the revolution in France.

他们之中有许多人相信，在英国数以千计的劳工阶级之悔改信主使英国免於遭受如法国大革命所造成的大屠杀和专制暴政。