查询词典 response surface

In addition, some modifications on several computational methods are also presented. Using LMTO method the electronic structure of several systems are studied, and some results are obtained. They are: The ideal Nb (100) surface has three surface states, the multi-layer relaxed surface has two surface states. The surface energy of the ideal surface is higher than that of the relaxed surface, that means that the multi-layer relaxed surface is more stable than the former one, which supports the LEED results. The mono-layer relaxed Ag (111) surface is the most stable one among several" stable surface models"presented by several researchers. The surface energy of Ag (111) surface is higher than that of surface Ag (001), which supports some experimental results such as different reaction rate at different surface orientations for the same material. The surafce states of Si (111) surface not only locate near the Fermi level, but also in the valence band, which agrees well with Cohen's conclusion. Si (111)-H is an effective model for analysing the surface states and H adsorbed on the back surface is a good method for improving the convincingness of the results obtained on thinner slab models. The surface stability depends on three different kinds of MoSi〓(001) surfaces, the surface with mono-layer Si is the most stable one, and the surface with Mo at the first layer is the most unstable one among them. These are consistant with the Kemoda's experimental results. The valence bands of clean or K adsorbed CdTe (111) surface agrees well with the synchrotron radiation studies. The surface of CdTe (111) consists of four kinds of surface models which show different surface electronic structures and different surface structure stabilities. The conclusion agrees well with Wu's experimental work. The different absorbed alkali metals on the CdTe (111) surface give different adsorption characteristics which have relations not only with the valence electrons, but also with the core ones of the alkali metals. The electonic structures of Si-C alloys are different from that of Si-Ge alloys, and the energy band gaps of Si-C alloys do not increase linearly with Carbon concentration, our conclusion supports Alexander's results, but conflicts with Soref's one.

现分述如下： LMTO方法及其应用方面：1）通过对Nb（100）表面电子态分析发现清洁理想表面有三个表面态，多层弛豫表面有两个表面态；表面能大小说明多层弛豫表面更稳定，支持了LEED结果。2）通过对采用不同方法获得的几种不同Ag（111）表面稳定结构的表面能计算分析，给出了单层弛豫表面为Ag（111）表面的最稳定结构；从Ag（111）单层弛豫表面和Ag（001）表面的表面能比较，发现了Ag（001）表面表面能要比Ag（111）小的，表明了同种物质不同表面取向将表现出不同物理、化学性质，这是与实验中得出的结论是吻合的，3）通过对Si（111）表面态分析，不仅发现了Si（111）表面不仅具有居于费米能级附近的悬挂键所对应的表面态，而且还有很多表面态位于价带能量范围内，与Cohen等结果一致，H饱和slab模型背表面相当于增加了slab层的厚度，是一有效的变相增加slab层厚的方法，弛豫表面较清洁理想表面价带谱们低能端的少许移动，预示着总能降低，说明弛豫表面较清洁理想表面稳定。4）MoSi〓具有三种表面，从费米能级上态密度值大小得到单层Si表面最稳定，Mo原子为表层原子的表面最不稳定，双层Si原子表面居中的结论，这与Kemoda等人实验结果是一致的。5）通过对CdTe（111）表面表面电子态、表面结构稳定性及表面H、碱金属吸附的电子结构系列研究，不仅得出了CdTe（111）清洁及碱金属K吸附价带谱与同步辐射光电子谱相吻合的结果，而且发现了CdTe（111）表面具有四类不同原子近邻特征，表现出四类不同的表面结构及电子结构特征：不同表面态分布、不同的表面结构稳定性（表层原子与次层原子成三键有一悬挂键的表面要比表层原子与次层原子成一键有三悬挂键稳定（与Wu等人实验结果一致））、不同的H吸附特性。

In order to disclose the adaptive strategies and capacity of Potaninia mongolica Maxim, acquired during its evolution history, the whole response system, which was composed of individual morphology plasticity response, organs anatomy structure response, physiological function response of anti-arid and anti-hotness, activities of protective enzymes response, endogenous hormone adjustment response, sexual reproduction strategies response of seeding, dispreading, sprouting and renewing, asexual reproduction strategies response of clonal growth patterns, clonal growth architectures, clonal growth architectures plasticity, heterogeneous resources utilization strategies, endogenous hormone distribution in clonal organs, foraging behavior, risk-spreading, and resource sharing, individual density allocation patterns response, niche differentiation response, species connection response, allelopathy response and biodiversity components response of the plant was profoundly explored in this paper.The studies come to at least four important results:(1) Taking the sensitive response and evading strategy to adapt to environment stress, Potaninia mongolica Maxim is a successful species has lived through the long-term evolution. Nevertheless, it is narrow climate and soil niche and characteristic of vegetation reproduction which has made the plant a rare and endangered species.

本论文通过对绵刺环境胁迫下个体形态可塑性响应、器官解剖结构响应、抗旱性和抗热性生理功能响应、保护酶系统激活响应、内源激素调控响应，有性繁殖对策中结实、扩散、萌发、更新等生活史过程响应，无性繁殖对策中克隆生长格局响应、克隆生长构型响应、克隆生长构型可塑性响应、克隆生长构型与资源异质性响应、内源激素调控克隆生长构型响应、克隆器官结构与功能响应、觅食行为响应、风险分摊响应、资源共享响应，种群中格局配置响应、生态位分异响应，群落中种间关联、异株克生响应、生物多样性组成响应等内容进行研究，揭示绵刺在进化过程中的适应对策和适应能力，为绵刺保护提供理论依据。

There are series of papers studying the solvability of an incompressible, viscous, instationary fluid contained in a domian bounded entirely by a free surface. In 1977, Solonnikov proved its local solvability in a Holder space for any initial date but without surface tension. In 1984, he considered the same problem in a Sobolev space with surface tension being taken into account. In I992, Mogilevskii and Solonnikov treated the same problem in a Holder space, where the coefficient of surface tension is not a constant. There are also short-time existence results for the solvability of an incompressible, vicous, unsteady fluid bounded above by a free surface and below by a fixed bottom which approach horizontal planes at infinity. In 1981, Beale proved its local solvability in a Sobolev space for any initial date but without surface tension. In 1983, Allain were concerned with the same problem in R〓 with surface tension but under the assumption that the initial fluid domain was near a horizontal strip. In 1987, he obtained the same result without the preceding assumption. In 1996, Tani solved the same problem in R with surface tension. For the solvability of an incompressible viscous instationary fluid in Ω R bounded inside by a free surface S and outside by a rotating boundary S, in 1995 Ciuperca proved its local existence in a Sobolev space for any initial date but without surface tension. In this paper, we consider the same problem with surface tension.

对于边界完全是由自由边界组成的有界区域中粘性不可压流体的非定常运动问题，Solonnikcv于1977年在忽略表面张力情况下证明了初值问题小时间解在Holder空间的存在性，于1984年在有表面张力情况下证明了初值问题问题小时间解在Sobolev空间的存在性，Mogilevskii和Solonnikov于1992年在表面张力系数可以不是常数情况下证明了初值问题小时间解在Holder空间的存在性；对于上面是自由边界、下面是固定边界且两边界在无限处趋于水平的无限区域中粘性不可压流体的非定常运动问题，Beale于1981年在忽略表面张力情况下证明了初值问题小时间解在Sobolev空间的存在性，Allain于1983年在有表面张力情况下证明了R中初值问题小时间解在Sobolev空间的存在性，但其中假定初始区域近似是个水平条，他于1987年去掉了这个假定得到同样的结果，Tani于1996年在有表面张力情况下证明了R中初值问题小时间解在Sobolev空间的存在性；对于R中内面是自由边界、外面是旋转边界S的有界区域中粘性不可压流体的非定常运动问题，Ciuperca于1995年在忽略表面张力情况下证明了初值问题小时间解在Sobolev空间的存在性，本文考虑了在有表面张力情况下初值问题可解性问题。

In the research of techniques in curved surface reconstruction and feature extraction, the modeling of NURBS interplation curved surface based on rectangular is focused, in which centripetal parameter is applied to construct node vector, the application of interplation method guarantees the accuracy of curved surface construction, bicubic NURBS curved surface is taken as an example to demonstrate the process of curved surface modeling, and the effectiveness of NURBS is approved in application; Meanwhile, the application of feature techniques in reverse engineering is also diSCUSSed, the recognition and extraction method of feature curved surface are investigated, the relationship between feature recognition and the curvature of curved surface is discussed, with the application of linear and non-linear least squares procedure, data fitting of conicoid in ball surface, cylinder surface and cone surface is

以上述的研究工作为基础，根据企业的实际需求选定轻客和重卡作为研究对象完成了基于反求工程的车身改型设计和优化的工程实践，通过工程实践对反求工程各关键支撑技术进行了验证，所开发的新车型也获得了良好的市场反应。

Results 1、 Generally, we can see the original blue and white, shiny, no cracks in the articular surface of the cartilage after the stress increases gradually yellow, surface roughness, cracks appear; when the pressure decreases, the yellowing, rough, the color of the fracture restore gradually and become shiny.2、the shiny smooth surface can be seen under a light microscope, formation, cell distribution, tidy, clear the level of cartilage at the articular surface stress increases, the surface roughness changes, defects, disordered cells, uneven dyeing ; when the articular surface of the pressure gradually decreased, the cartilage gradually repair and the surface of cells at the surface appear only disorder.3、immunohistochemical observation can be seen throughout the observation period, cartilage cells are type Ⅱ collagen expression and expression after 3 weeks gradually weakening, when the seventh week begin to strong gradually.4、 electron microscopy shows that when stress increases the articular surface, the cartilage cells became flat, the cytoplasm in the endoplasmic reticulum, Golgi apparatus decreased with collagen disorders; and when stress decreases the articular surface, cartilage cells gradually returned normal, cytoplasm in the endoplasmic reticulum, Golgi body gradually restore quantity; collagen fibers with a gradual rules.

结果：①大体观察可见到原本蓝白色、有光泽、无裂纹的软骨在关节面压力增大后，逐渐呈灰黄色，表面粗糙，出现裂隙；当压力逐渐减小后，变黄、粗糙、有裂隙的软骨颜色逐渐恢复，变得有光泽②光镜下可见表面光滑、平整，细胞分布均匀、整齐，层次清楚的软骨在关节面压力增大后，表面变粗糙、缺损，细胞排列紊乱、染色不均；当关节面压力逐渐减小后，软骨表面逐渐修复，细胞仅在表层排列紊乱③免疫组织化学观察可见整个观察期内软骨细胞胞浆内均有Ⅱ型胶原表达，术后3周内表达逐渐变弱，从第7周时开始逐渐变强。④电镜下可见当关节面压力增大后，软骨细胞逐渐变扁，胞质中内质网膜、高尔基体减少，胶原排列紊乱；当关节面压力减小，软骨细胞形态逐渐恢复正常，胞质中内质网膜、高尔基体数量逐渐恢复；胶原纤维排列逐渐有规则。

The major content of this course includes: calculation, measurement and control of solid surface composition, the structure of solid surface, electronic potential, energy band structure and surface energy state of solid, the action between gas and solid surface, chemistry behaviors of molecular on solid surface (chemisorption and catalysis of solid surface), activation and passivation of solid surface, fundamental principle and application of photo and electricity surface reaction, design of solid surface functional materials, and etc.

基本内容包括：固体表面组成计算、测定与调控，固体表面结构表示方法、测定与控制，固体表面电子势和表面态、固体表面能带结构以及固体能带的测定，固体表面的功能、气体-固体表面间的作用以及气体-固体表面作用的研究方法，分子在固体表面上的化学行为(化学吸附和固体表面催化作用)，固体表面的活化与钝化，光电表面化学反应基本原理及应用，固体表面功能材料的设计等领域。

Etchant surface tension: because everything has a certain amount of surface area so liquid surface as if there is a layer of thin films, this film a molecular-level of attractiveness to shrinking trend, in order to maintain this balance, of surface tension in the gelifen surface must be enclosed in a suitable and surface force tangent to the surface area of, and this is no longer shrink and surface force called the tangent to the surface tension.

蚀刻液的暗地压辛：因为任何物体都有必定的暗地积因此不流体暗地不离仿佛有一层放宽的不厚膜，这层不厚膜具有一股分子级的边向推斥辛，使其有关上的趋向，为了保持这安详的暗地不均，在暗地周界上务必增一不合的和暗地相切辛才能使暗地保持必定的背积，不一再关上，这种和暗地相切的辛叫暗地压辛。

Single factor experiments were done with the factors including the width of protrusion and the trolley's velocity, which showed that the surface frictional coefficient decreases with the width of protrusion increasing, and doesn't change with the trolley's velocity changing, which was consistent with the results of the orthogonal experiment. A theoretical model of the horizontal projection of a corrugated bionic surface's contact area was built, which showed that the contact area's horizontal projection decreases with width and interval increasing respectively and that the ratio of the contact area's horizontal projection and the vertical load decreases with the vertical load increasing. It indicated that the surface frictional coefficient decreases with the above three factors increasing respectively. Finite element modeling and analysis of interactions of a plate and soils was done using ANSYS, which showed that the plate frictional coefficient is little relative to soil elastic modulus and decreases with vertical surface pressure and that trolley's pull and vertical displacement of bionic surface's control pilot keep constant almost during the plate being pulled. Finite element modeling and analysis of interactions of a corrugated bionic surface and soils was done using ANSYS, which showed that surface frictional coefficient is little relative to soil elastic modulus and decreases with bionic surface's structural parameters and vertical pressure increasing. However, the three factors all didn't affect the surface frictional coefficient remarkably on the condition of 90% dependability. For the first time, bionic surfaces were applied to screw piles, which formed bionic screw piles, and the contrast experiments showed the bionic screw pile had certain resistance-decreasing effects.

建立了波纹型仿生曲面与土壤的接触面积的水平投影的理论模型，表明接触面积的水平投影A随着波纹型仿生曲面突起宽度、两相邻突起间距的增大而减小，接触面积的水平投影与波纹型仿生曲面表面垂直载荷之比随着波纹型仿生曲面表面垂直载荷的增大而减小，进而得出仿生曲面摩擦系数随着波纹型仿生曲面突起宽度、两相邻突起间距以及表面垂直载荷的增大而减小；利用ANSYS软件对平板与土壤的相互作用进行了有限元建模与分析，表明平板摩擦系数与土壤弹性模量关系不大，而随着表面垂直载荷的增大而减小；平板牵引过程中台车牵引力和仿生曲面控制节点垂直方向位移基本保持不变；利用ANSYS软件对波纹型仿生曲面与土壤的相互作用进行了有限元建模与分析，表明波纹型仿生曲面系数在一定范围内基本不受土壤弹性模量的影响，随着波纹型仿生曲面突起宽度、两相邻突起间距以及表面垂直载荷的增大而减小，但在可信度为90％的前提下，三个因素影响都不显著；首次将波纹型仿生曲面应用于与土壤作用方式以挤压为主的螺旋桩，形成仿生螺旋桩，并与普通螺旋桩进行了沉桩对比试验，表明波纹型仿生曲面应用于螺旋桩桩体表面具有明显的降阻作用。

The results were as follows:(1) The spectral sensitivity response at 14 monochromatic light selected through 340nm to 605nm occurred in curve with multiple peaks, the primary peak in 340nm (ultra-violet) is the highest response rate of phototaxis (21%), the secondary in 524nm, and the rest in 400-440nm and 483nm in order;(2) The response rate of phototaxis is increasing as the relative intensity of light, it is showed as curves with inverse "L" shape in white light and the monochromatic light of 483nm, as an upward ladder at 524nm and a near straight line at 340nm. However, the response rate could be detected at the lowest intensity and not arrived to the summit at the strongest yet;(3) The effect of sex to response to the spectral sensitivity and intensity is not significant;(4) There was not significant photophobism response to light for the ladybird, the behavior probably derived from phototaxis or partly due to random movements. It can be concluded that both the spectrum and intensity of light stimulus gave rise to the phototaxis of P.

结果显示：（1）在340~605nm波谱内其光谱趋光行为反应为多峰型，峰间主次不明显，紫外340nm处峰最高，趋光反应率达21%，其它各峰依大小次序分别位于绿光524nm、蓝光400~440nm和483nm处；（2）随光强增强其趋光反应率增大，白光和483nm刺激时其光强趋光行为反应呈一倒"L"型式样，524nm时呈一阶梯型，340nm时为一较平直的线型；光强最弱时仍均有一定趋光率，最强时均未出现高端平台；（3）性别对其光谱和光强度行为反应均有一定影响，但影响不大；（4）龟纹瓢虫无明显的避光反应，其避光行为可能是趋光行为衍生或其随机活动造成。

Therefore,a series studies of ice-pier vibration are performed from different aspects in this paper.The main work of this his thesis is summarized as follows:(1) Ice response spectra is proposed based on the idea of a seismic response spectra analysis of str .. uctures.Firstly,ice response spectra on the basis of power spectra density function is established;Secondly,based on the assumption of quadratic parabolic interpolation method,the nonlinear interpolation analysis method of ice response spectra is studied from both theoretical and practical points of view,and the successive computation formulas including ice displacement,velocity and acceleration response spectrum are deduced by Duhamel integral.Furthermore,to analyze the effectivity and applicability of the method, the real temporal curves of ice pressure are used to be studied.The results show that the presented method is more convenient and accurate to study the structural response induced by ice force,also it can be effectively applied in the design of ice resistance.

鉴于此，本文针对冰激桥墩结构振动问题从不同方面展开了一系列与之相关的研究，主要研究内容如下：(1)根据结构抗震反应分析思想提出了冰振反应谱，首先建立了基于功率谱密度函数的冰振反应谱；其次借鉴地震反应谱内插法的思想从理论和实际观点出发，假定在等距离微小时间间隔内冰荷载按二次抛物线规律变化，由Duhamel积分推导出冰振位移、速度以及加速度反应谱的一系列连锁公式，建立了基于非线性内插法的冰振反应谱，并利用实际冰压力时程曲线进行了冰振反应谱数值分析，为以后冰激结构振动的研究提供一种方便、简捷、精确的分析方法，也能够将其有效地应用到结构的抗冰计算中。

Chimborazo and Cotopaxi, took me by the hand.

越过琴博腊索山和科托帕克西山。

This car is in a good condition.

这辆车的状况很好。