查询词典 proposed

Firstly, after the analysis on probability distribution of GenCos' bidding results, a concept of bid acceptance probability distribution function of GenCos is proposed; then based on the features of bidding structure in day-ahead and real-time markets, a multi-objective bi-level programming bidding strategy model in day-ahead and real-time markets for GenCos is built for electricity markets in which the step-wise bidding function and pay-as-bid settlement protocols are utilized; and then in order to solve the proposed model an algorithm based on Monte Carlo method and genetic algorithm is designed; finally, the simulation of numerical examples are performed to verify the correctness of the proposed model and algorithm.

首先在分析了发电商竞价结果的概率分布之后，提出了发电商竞价成功概率分布函数的概念。然后基于日前和实时市场中投标结构的特点，针对采用分段报价和按报价结算(pay as bid price，PAB)方式的电力市场，建立了日前和实时市场中发电商的多目标二层规划竞价策略模型，并设计了以蒙特卡罗方法和遗传算法为基础的求解算法。最后采用算例对所提出的模型和算法进行了仿真验证。

In this paper, based on MPEG 2 Test Model 5 (TM5) bit rate control algorithm, there are some improvements proposed:① an intelligent integral action is proposed for improving the control precision of bit rate;② after using DCT AC coefficients to define the measure of macroblock and picture coding difficulty, an improvement on target bits allocation is proposed for the decoded picture quality and conformance including scene change, which can adjust the target bits allocation adaptively by their measure.

针对MPEG－2测试模型5（TM5）比特速率控制算法进行了以下改进：①引入一种智能积分作用，有利于提高比特速率的控制精度；②采用DCT交流系数定义宏块和图象的编码难度测度，然后提出了改进的目标编码量分配策略，即根据编码难度测度自适应调整图象和宏块的目标编码量，有利于提高包括场景变化在内的图象解码质量及其一致性。

Usually, distribution networks operate in arborescence mode, so in the simulation of fault analysis the impact of faulty switch element on system reliability is apportioned to failure consequences of adjacent sections that connect to switch, and then an equivalent analytical model considering switch fault is proposed. Thus, not having to conduct the reliability analysis of switch element singly, the impact of switch element fault on system reliability can be calculated. Applying the proposed algorithm in RBTS-BDS6 system, RBTS-BUS4 system and actual medium-voltage distribution network to conduct reliability assessment, the results show that the proposed algorithm is superior in speed and possesses efficiency and engineering practicality.

配电网常具有树状运行特点，在故障解析模拟时，将开关元件故障对系统可靠性的影响分摊到连接开关的相邻分块的故障后果中，进而提出计及开关故障的可靠性等值解析模型，不需单独进行开关元件故障的可靠性分析即可计算其对系统可靠性的影响，应用该算法对RBTS-BUS6和RBTS-BUS4系统及实际中压配电网进行了可靠性评估，结果表明该算法有较明显的速度优势，具有高效性和工程实用性。

The main points of this paper are as follows:(1) The actuality and the deficiency of the current workflow technology is analyzed according to the expatiating on the workflow technology.(2) A workflow model supporting the dynamic modifying and its implementation arithmetic and an implementation method using the OO technology is proposed according to the Directed Graph theory.(3) The strategy of dynamic modifying of workflow model is researched, a improved conversion strategy is proposed, and the detailed process of dynamic modifying is discussed.(4) Having researched on the construction scheme of digital campus based on URP and the workflow of office business, an OA system model based on dynamic workflow technology was proposed according to the workflow management system model and several typical functions of OA workflow management system were realized, which is of high value on improving the autoimmunization of business operation and the cooperating work ability.

论文的主要内容如下：(1)通过对工作流技术的全面阐述，分析了目前工作流技术发展的现状和不足，为自己的研究工作划定了问题域范围；(2)利用有向图定义了一个支持动态修改的工作流模型，并给出了该模型的执行算法，给出了该模型利用面向对象技术的一种实现方法；(3)详细讨论了工作流模型的修改策略和方法，提出了一种改进了的转换策略，并给出了动态修改操作的具体步骤；(4)在深入分析基于URP的数字校园建设方案以及办公工作流程的基础上，结合工作流管理系统参考模型，提出了基于动态工作流技术的OA系统模型，实现了OA工作流管理系统中几个典型的功能，对提高业务处理自动化，提高协同工作能力具有重要的应用价值。

A novel layout of IC transformer is proposed to achieve both high turn ratio and coupling coefficient in this paper. In order to discuss the coupling coefficient, the layouts are designed with different turn ratio. The thesis is mainly includes of three experiment topics. The multi-stack structure is proposed to achieve prior goal in first topic. Two groups of proposed devices are designed to maintain identical self- inductances in transformer's primary and secondary coils. Total six devices are fabricated in foundry 90-nm CMOS technology. Using the 9 and 5 metal layers in primary and secondary coils in a specific layout, measurement results show that the transformer has the largest benefit using the bottommost return layer in layout design. In one word, the adoption of more metal layers to construct different turn ratio transformer shows not only improving the N value but also saving the chip area in this experiment.

中文摘要本文是针对不同圈数比变压器探讨其耦合量的变化，并且期望其变压器能同时达到高圈数比及高耦合系数的特性，本论文主要可分为三个实验主题，首先第一个主题提出以90nm CMOS制程技术实现的多层金属层的布局方式，并以相同的一、二次侧自感值分为两组，利用不同返回层来达到不同的圈数比，且从量测结果可以得知，在变压器布局设计上使用最底金属层来作返回层会得到较好的特性，最后从此实验得知一结论，利用合适的多层金属架构达到不同的圈数比，不仅可以改善圈数比，还可以缩小晶片面积。

The algorithm GS to solve the problem of inverse dynamics based on the optimal theory is proposed, by using the numerical methods of Gill and shooting target, the optimal joint driven torques are obtained With the smooth joint trajectory motion, a fast and stable inverse dynamics method is proposed, it provides a new effective way to control the flexible manipulator The trajectory planning in the joint space and Cartesian coordinates is especially discussed In terms of kinematics of space flexible link manipulators, a sequential integration method for inverse dynamic analysis of flexible manipulators is developed The concrete results of simulations tested and verified the validity of proposed methods, and some valuable conclusions are achieved.

提出了求解基于最优理论的柔性臂逆动力学问题的GS法(Gill—Shooting method)，得到了柔性臂关节的最优驱动力矩；提出了基于光滑关节运动轨迹的柔性臂逆动力学的快速稳定方法，为柔性臂控制提供了一条新的途径；探讨了关节空间和直角坐标空间柔性臂的轨迹规划问题；研究并完善了结合柔性臂运动学的顺序积分的逆动力学方法。通过具体实例的仿真研究，验证了所提出的柔性臂逆动力学方法的有效性，得出了一些很有价值的结论。

Based on a lot of experiment results, a conclusion is drawn: comparing with other factors, the performance of branch handling strategy is the key limits of processor to exploit the instruction level parallelism existed in nonscientific code, cache miss have severe effect on superscalar processor's performance when it runs scientific code. Second, in order to reduce the branch penalty and improve the performance of superscalar processor, a new branch handling strategy—a classification based hierarchical branch handling strategy, CHBHS is proposed. It first expands the traditional processor architecture to support multiple condition code, conditional execution and Mbranch instruction, as a result, compiler can reduce the number of static conditional branch when the code is generated. Then, CHBHS tries to use the best suitable mechanism to deal with different branch base on their different behavior. CHBHS can predict the target address of unconditional branch, subroutine call and conditional branch by buffering their target address in branch target buffer, a newly proposed high efficient return address stack is used to reduce the penalty of subroutine return instruction, a new Counter Register Stack is also proposed to reduce the penalty of loop-closing branch to zero, and dynamic branch predictor is incorporate with branch target buffer to predict the outcome of conditional branch.

基于上述结论，为了尽量消除转移指令对处理器开发指令级并行性能力的影响，进一步提高处理器性能，在详尽分析目前已存在的转移处理策略的特点与局限性的基础上，首次提出了一种新的转移处理策略即基于分类的层次转移处理策略CHBHS(Classification Based Hierarchical Branch Handling Strategy)，它首先通过扩展传统的体系结构，支持多条件码、条件式执行及多分支转移技术，以使编译程序在进行代码生成时可尽量少生成条件转移指令，从而减少静态条件转移指令的数目；其次，基于不同的转移指令的行为不同这一事实，提出了对不同的转移指令采用不同的机制进行处理的思想，即对无条件转移指令和函数调用指令以及条件转移指令的目标地址，采用转移目标缓冲器来预测，对于函数返回指令，采用所提出一种的高效返回地址栈来预测其目标地址，对于大多数循环控制转移指令，采用所提出的Counter Register Stack来将其所可能带来的损失减少为0，对于其他的条件转移指令采用动态预测机制来预测其方向。

So the proposed method in this dissertation not only meet the requirements for fossil-fuel unit set in GB/T 12145-1999, but also can effectively restrain condensate and feed water system corrosion. Thereby the proposed method can reduce the loss by corrosion's leading accident, lower Fe content in boiler feed water, slow the boiler's scaling speed, delay boiler's chemical cleaning interval, effectively enhance unit's reliability, usability and using life and solve the problem of poisonous chemical deoxidant. So the proposed method can economize substantial expense for power plant.

所以，本文所提出的汽包炉有限氧化性水化学工况不但能满足GB/T12145-1999中对火力发电机组及蒸汽动力设备的要求，而且可有效抑制凝结水和给水系统的腐蚀，减少因这些部位腐蚀损坏而引发的事故停机损失，降低锅炉给水中的金属含量，减轻炉内的结垢速度，延长锅炉的酸洗间隔，有效提高机组的可靠性、可用率和使用寿命，同时也解决了有毒化学除氧剂的使用问题，为电厂节省大笔运行费用。

Aiming at these problems, an expectation maximum based MAP algorithm is proposed and the performance is analyzed. The proposed algorithm avoids large matrix operations by using the EM algorithm to decompose the MIMO channel estimation problem into a series of single input single output problems. Besides, a joint estimation is carried out over multiple OFDM symbols in order to enhance the data transmission efficiency and the estimative performance of the proposed algorithm.

该算法利用EM算法把多输入输出信道估计问题化简为一系列独立的单输入输出问题，避免了大规模矩阵运算，降低了MAP算法的计算复杂度；为进一步改善MAP算法的数据传输效率及其估计性能，可通过对多个连续的OFDM符号进行联合信道估计。

The main content includes as the follows:(1) An automatic neighbor discovery mechanism applicable to SDH network is proposed;(2) For the optical network with Optical Transfer Unit in WDM, a General Multi-protocol Label Switch-based automatic neighbor discovery mechanism is proposed and simulated;(3) Three automatic neighbor discovery mechanisms for the all-optical network with OEO module are proposed and comparatively simulated;(4) With the Loss of Light detecting, a novel automatic neighbor discovery mechanism in all-optical network without any OEO module is proposed.

主要工作包括：（1）提出了SDH网络的自动邻居发现机制；（2）提出了带波长转换器的光网络的自动邻居发现方案，并通过仿真对发现过程进行了跟踪和统计；（3）提出了三种带有光电转发模块的光网络的自动邻居发现策略，并做了仿真比较；（4）提出通过光丢失检测方式对不带OTU的光网络进行自动邻居发现的实现方法。

If you are unfortunate enough to the lovelorn, please tell me, I will help you out, really, please contact me!

如果你不幸失恋了，请告诉我，我会帮助你摆脱困境，真的，请联系我啦！

China's plan to cut energy intensity by 20 percent and pollutant discharges by 10 percent between 2006 and 2010 is a case in point.

中国计划在2006年到2010间降低20%的能源强度和减少10%的主要污染物排放，就是一个这样的例子。