查询词典 controllable stochastic process

During the intermissive fed-batch process, the feeding medium was added 10 times separately to make the total amount of C and N sources equal to those added in the batch process, and the yield of maduramicin was improved to 9645 μgmL^(-1), which is 15.7% higher than that obtained during the batch process. In the continuous fed-batch process, the maduramicin yield reaches 10328 μgmL^(-1), which is 6.0% higher than that obtained in the intermissive fed-batch process, and is 29.4% higher than that obtained in the batch process.

在间歇补料分批发酵工艺中，分10次补加培养基，使碳、氮源的总浓度与分批发酵相同，马杜霉素发酵单位提高到9645μgmL^(-1)，比分批发酵提高了15.7%；在连续补料分批发酵工艺中，马杜霉素发酵单位可达10328μgmL^(-1)，比间歇补料分批发酵提高了6.0%，比分批发酵提高了29.4%。

The results showed high class PbSt2 could be synthesized by this new saponifying process.Compared with metathetical process,the reaction time shortened,liquid-solid ratio and moisture content of filter cake decreased.Powder product could be prepared by one-step process,and particle product by two-step process.For the optimum processing conditions,the reaction temperature and time for one-step process were 65℃ and 10min,the amount of alkali added in the first step was 50%;reaction temperture and time were 65℃ and 10min for the two-step process.

结果表明，用皂化法工艺可得到优等品PbSt2，较复分解工艺，反应时间缩短、液-固比降低、滤饼湿含量比减小，一步式工艺得到粉状产品，二步式工艺得到颗粒状产品；最佳工艺条件为：一步式工艺反应温度65℃，反应时间10min；二步式工艺第一步的加碱量比50%，反应温度65℃，反应时间10min。

In this paper, two assemblies of special test equipments have been designed and fabricated by authors in our laboratory: namely Catalyst Molding Process Analyzer and Catalyst Mechanical Process Tester. These new skills are developed for the dynamic studies on whole mold forming process and crushing process of Fe-Cr WGHS catalyst pellet. Based on the orthogonal experimental design, the effects of some factors during the forming process of solid catalyst, such as predensification proportion, calcination time, calcination temperature and content of graphite on the mechanical strength of catalyst pellets are systematically examined, and the molding conditions have been optimized. Based on the experimental data, the relationship between catalyst density and forming pressure are educed, and the physical significances of some related parameters are described. The parameter of macro scopic elastic moduls has been suggested to character the mechanical properties of molding catalyst. The effects of molding pressure on mechanical properties of catalyst pellets are discussed, and results show that there exists a optimal molding pressure for the ideal mechanical properties: when over-high or over-low pressure is applied, the specific surface area and side crushing strength of catalyst pellets will decreased. The "rebound effect" will be undermined by the unsuitable pressure maintain process, resulting in the apparent decrease of mechanical strength of catalyst pellets.

本研究通过自行设计制造的催化剂模压成型过程分析仪（Catalyst Molding Process Analyzer， CMPA）和催化剂力学性质测试仪（Catalyst Mechanical Properties Tester， CMPT），以Fe-Cr系高温变换催化剂片剂为研究对象，对成型过程和受压破碎过程提供了全过程动态研究的新手段；本研究利用正交实验设计方法考察了固体催化剂成型过程中诸因素（包含预密致比例、煅烧时间、煅烧温度和石墨含量等）对催化剂成型体强度的影响，并对成型条件进行了优化；根据实验结果，关联确定了固体催化剂成型过程中的密度－压力关系式，并对方程中诸因子的物理意义进行了描述；提出了一种利用宏观弹性模量来表征成型催化剂的力学性质的方法；研究讨论了成型压力对催化剂成型体强度性质的影响，结果表明：对于催化剂成型体的强度和比表面性质，成型压力存在着一个最佳值，过高的成型压力会导致比表面积和侧压强度的降低；不适当的成型压力的维持时间会破坏&压力回弹&作用，造成催化剂成型体的机械强度明显降低。

A integrated mathematical model was established in accordance with the process of metallurgical production and it was composed of the process models and the raw materials distribution models. The process models include the sintering process model, the pelleting process model and the iron making process model.

数学模型分为6个子模型，其中工艺模型有烧结机优化模型、竖炉优化模型、高炉优化模型，物料配置模型有铁精粉优化配置模型，烧结矿优化配置模型和球团矿优化配置模型，模型之间交互的数据流为原料或产品的物料流量、物料性能、价格及原料性能的影子价格。

The result shows that the canard parameters and angular velocity are the main factors which influence the dynamic stability of the controllable projectile and should be controlled reasonably in the process of the design of aerodynamic configuration and trajectory.

结果表明，舵面参数与弹丸转速是影响有控弹道动稳定的主要因素，须在气动布局参数设计和弹道设计时加以合理控制。

Electrorheological technology is a new and marginal science, electrorheological fluid is a kind of smart material, with the control of external applied electric field, its coefficient of viscosity and shear yield stress can rapidly change, and this process is controllable, continuous, and reversible.

电流变技术是一门新兴的边缘科学，电流变液是一种智能材料，在外加电场的控制下，它的表观粘度和抗剪屈服应力可发生快速、可控、连续、可逆的变化。

Further, it proves that the process of training is controllable.

更进一步，得到了支持向量机是部分可控的结论。

And this article divides the farmers into three grades in the point of qualitative and quantitative views, and according the principle of econometrician, using the way of Oaxaca analysis, choosing and analyzing the controllable variables in the maize process, in order to find the main ingredients which forming the difference about the behaviors of maize producers based on the different maize grossing zones.

本文通过对南北三省农户玉米生产的投入和产出情况进行实地调查，首先比较分析了不同收入等级农户、不同地区农户和不同土地等级玉米生产的成本和收益情况；然后从定性和定量的角度将农户分为三个等级，再从农户等级和不同玉米种植区的角度出发，根据计量经济原理，运用OAXACA分解分析方法，选择农户玉米生产中的可控制变量对其进行分析，以找出形成农户玉米生产行为差异的主要影响因素。

Development and experimental study of the key parts of foreside control ultra high speed injection moldingThe designing theories and methods of microdisplacement actuator for controllable nozzle based on GMM are proposed. The designing process of such components as microdisplacement transfer and amplifier mechanism, driving coil and control circuitry is presented particularly.

前端控制式超高速注射成型关键部件的研制及相关实验研究提出了可控喷嘴用超磁致伸缩微位移驱动器的设计理论和方法，通过理论分析计算优化了驱动线圈和控制电路的设计。

The definition of the super-addition has been studied using the way of logical analyze by this article, and the super-addition can be defined as: external feed back information form which has the characteristic of controllable provided toward individual in the process of learning skills.

在运动技能控制与学习领域，关于运动技能学习和人们操作的研究中，许多学者一直致力于追加反馈的研究。

There had been a moment during the breakfast meeting, though, after the backslapping and the small talk and when all of us were seated, with Vice President Cheney eating his eggs Benedict impassively and Karl Rove at the far end of the table discreetly checking his BlackBerry, that I witnessed a different side of the man.

那次早餐会期间，在表示过关心和寒暄以后，我们所有人坐了下来，我注意观察了一下，副总统切尼面无表情地吃着班尼迪克蛋（Eggs benedict，源自美国，以英式松饼、火腿、水煮蛋以及荷兰酱组合而成），卡尔。罗夫在餐桌的远端谨慎地经常查看他的黑莓手机，我目睹了他所不为人知的一面。

Talk Undelete failed; someone else may have undeleted the page first.

Talk 无法删除选定的页面或图像（它可能已经被其他人删除了）。