查询词典 combustion engineering

By regression of experimental data, therules of the linkage between these factors, which will provide a theoretical basis for designing BBP with different scales.3 Using thermal analysis technology and dynamic thermogravimetry, the paper studies combustion kinetic characteristics of 3 types of agricultural crops at different rate of temperature rise, and thus, achieved dynamic parameters of these fuels at different rate of temperature, established dynamic model of straw combustion, which reflects the dynamic process in the fast combustion area.4 Characteristics of straw briquette combustion was experimented, focusing on the impact of straw type, temperature, air supply, and density, diameter, and weight of briquette on the combustion speed, and the following conclusions were drawn:(1) combustion of straw briquette fuel is static permeation diffusion combustion;(2) temperature has a larger impact on the speed of straw briquette combustion than air supply; the higher the combustion temperature is, the faster volatilizable component separates out, and the less steady the combustion is;(3) density of briquette fuel has impact on the speed of volatilizable component separation and therefore the combustion speed;(4) increase of diameter and weight of briquette fuel increases the average combustion speed in the initial stage, and that in the later stages is comparatively steady;(5) the proportion of volatilizable component in straw briquette fuel is high, therefore, the temperature control during combustion under the rational ventilation condition is essential to ensure its safe combustion.5 Using the above-mentioned results of experiments and theoretical analysis, and based on thought of hydraulic driven and bi-direction compression, the hydraulic system and compression parts of the HBP BBP are re-designed in terms of industrialization.

利用热分析技术，采用动态热重实验法，对我国的三大农作物秸秆在不同升温速率下的燃烧动力学特性进行了较系统的研究。得到了各原料在不同升温速率下的动力学参数；建立了秸秆燃烧的动力学模型，该模型反映了秸秆迅速燃烧区的动力学过程。 4 对秸秆成型燃料的燃烧特性进行了试验研究。着重研究了秸秆河南农业大学博士学位论文巫的种类、温度、空气供给量、成型燃料密度、直径、质量对成型燃料燃烧速度的影响并得出如下主要结论：①秸秆成型燃料的燃烧方式属于静态渗透式扩散燃烧。②秸秆成型燃料燃烧速度受温度的影响大于通风量燃烧速度的影响：燃烧温度越高，挥发分析出速度越快，燃烧平稳性愈差。③成型燃料密度影响成型燃料挥发分的析出速度，影响燃烧速度。④成型燃料直径和质量的增加，使得燃烧初期的平均燃烧速度增大，中后期的平均燃烧速度相对平稳。⑤秸秆成型燃料含挥发分比例高，因此合理配风下的控温燃烧是保证其完全燃烧的关键。 5运用已取得的试验和理论分析结果，以液压驱动、双向成型为基础，从产业化的角度对HBP型成型机进行了液压系统和成型部件的改进设计；同时采用了二级预压机构，使该成型机的生产率达到 500kg.hd；单位能耗 60kwh。上'左右，磨损件修复周期 300小时左右，基本解决了影响生物质固化技术在国内推广的技术难题。

The combustion events in the swirl chamber and the main chamber are processed differently. The combustion in the swirl chamber is broken into three phases: low temperature ignition, high temperature premixed combustion and flamelet diffusion combustion, while the combustion in the main chamber is only considered as flamelet diffusion combustion. The Shell ignition model, global Arrhenius equation and coherent flamelet model are used to describe low temperature ignition kinetics, high temperature premixed kinetics combustion and flamelet diffusion combustion respectively.

把涡流室式柴油机不同区域与不同时期的燃烧过程分开处理，将涡流室中的燃烧过程划分为三个性质不同但相互重叠的阶段：用Shell着火模型模拟的低温着火化学动力学反应阶段，用Arrhenius方程模拟的高温预混燃烧化学动力学反应阶段和用相关火焰微元模型模拟的扩散燃烧阶段，认为主燃烧室的燃烧只有相关火焰微元的扩散燃烧阶段。

It is firstly found that the NOx concentration increases rapidly when is less than 0.75, which complements the staged combustion and the rich-lean combustion that are well considered currently as low NOx combustion. It does not mean that the combustion must be the low NOx combustion when . There is a limited least value of air excess coefficient. The combustion is not the low NOx combustion when is less than the limited least value.

对目前普遍认为的分级燃烧和浓淡燃烧可以降低NO_X排放的提法给予补充，即对一次过量空气系数有一个最小值限定，不是小于1的任何值都可以，低于最小限定值将是不利的，而且一次过量空气系数有一个最佳值。

Ltd's 40 t/h boiler heating surface has been optimized based on the analysis of coal-fired boiler and gas-fired boiler's different characteristics and heat transfer technology. At the same time, combustion mode and measures of stable combustion are analyzed and discussed, for the flameless combustion technology characters such as combustion speed, high-temperature, combusting completely and the stability of combustion, easy to operate, with the different combustion characteristics of blast furnace gas, coke-oven gas, converter gas and the actual needs of Chongqing Iron and Steel Co. Ltd's gas balance, a suitable combustion device is designed to improve boiler's thermal efficiency, recovery efficient of by-product gas, and reducing gas emission.

本文通过对燃煤锅炉与燃气锅炉的不同特点对比分析以及受热面传热技术的探讨，对重钢40t/h锅炉受热面进行了优化改造；同时对燃气燃烧方式以及强化燃烧的技术措施进行了分析和讨论，利用无焰燃烧技术的燃烧速度快、燃烧温度高，燃烧完全及扩散燃烧技术的燃烧稳定、运行可靠、结构简单等特点，结合高、焦炉煤气的不同燃烧特性和重钢煤气平衡的实际需要，选择、设计了合适的燃烧装置，实现了提高锅炉热效率，高效回收利用副产煤气，降低煤气放散的目的。

The computational results indicate that surface catalytic combustion restrains gas phase combustion. Inlet velocity and tube diameters have important influence on catalytic combustion of hydrogen. For smaller inlet velocities,reaction is dominated by gas phase combustion. As the inlet velocity increases,there exist both surface catalytic combustion and gas phase combustion. For bigger inlet velocities,reaction is dominated by surface catalytic combustion. The temperature of flame core decreases with the decrease of tube diameter.

计算结果表明，表面催化反应对空间气相反应有抑制作用；入口速度和管径对氢气的催化燃烧过程有重要的影响，在入口速度较小时，燃烧主要是空间气相化学反应，随着入口速度的增大，燃烧过程同时存在着表面催化反应和空间气相反应两种控制因素，在入口速度较大时，燃烧主要是表面催化燃烧过程；随着管径的减小，微型管道内反应的最高温度降低。

The civil engineering scope is very wide, including the house construction engineering,highway and city road engineering,railroad engineering,bridge engineering,tunnel engineering,airport engineering,underground engineering,water supply to drain engineering,port wharf engineering etc..

土木工程范围非常广，包括房屋建筑工程、公路与城市道路工程、铁道工程、桥梁工程、隧道工程、机场工程、地下工程、给水排水工程、港口码头工程等。

Works - mainly undertake the following business: intelligent building, smart systems integration weak plot lump-sum engineering, integrated wiring systems engineering, computer network systems integration engineering, computer room engineering, earthing, lightning protection engineering, anti-theft alarm, closed circuit monitoring system , public radio, background music systems engineering,(offices, schools, factories and karaoke OK) multi-function room audio-visual, frequency, and conferencing systems, lighting, sound systems engineering, IC card access control, electric door, video intercom doorbell system engineering , parking autotoll systems engineering, remote telephone, video conferencing systems engineering company based in Guangdong, for the country, major customers, including banks, tax, post and telecommunications, railway, companies, state organs, the property companies.

工程方面-主要承接以下业务：智能大厦、智能小区弱电系统集成总包工程、综合布线系统工程、计算机网络系统集成工程、计算机机房工程、接地、防雷工程、防盗报警、闭路监控系统工程、公共广播、背景音乐系统工程、（机关、学校、工厂及卡拉OK）多功能厅音视、频及会议系统、灯光音响系统工程、门禁IC卡、电动门、可视对讲门铃系统工程、停车场自动收费系统工程、远程电话、电视会议系统工程、公司立足于广东、面向全国，主要客户包括银行、税务、邮电、铁路、公司、国家机关、物业公司等。

By timely and spatially controlling the physical and chemical characteristics of the fuel at both port injection stage and in-cylinder direct injection stage, HCCI/DI stratified compound combustion is developed to combine the advantages of HCCI and conventional DICI on cycle-to-cycle basis and achieve clean and efficient combustion at full load ranges without misfiring and knocking.Firstly, three types of dual fuel including n-heptane/diesel, iso-octane/diesel and ethanol/bio-diesel a...更多re utilized to investigate the combustion and emission characteristics of HCCI/DI stratified compound combustion. The experimental results indicate that n-heptane/diesel HCCI/DI combustion presents a three-stage heat release consisting of HCCI low temperature heat release, high temperature heat release and diesel diffusive combustion.

本文提出的基于燃料设计与管理的HCCI/DI分层复合燃烧是一种将HCCI燃烧和传统缸内直喷压燃融为一体的新型燃烧方式，通过对燃料理化特性的设计和在预喷与直喷阶段从时间尺度和空间尺度上对均质和非均质混合气制备过程的控制和管理，在发动机的一个工作循环中将均质混合气的HCCI燃烧和非均质混合气的DICI扩散燃烧相融合，彻底消除了HCCI燃烧在小负荷失火和大负荷爆震的弊病，实现了发动机全负荷范围内的高效清洁燃烧。

Design construction projects the main programming: the preparation of engineering design submissions Hospital Hospital project plan The total partition function of the Hospital Clinic at the walls between the structural engineering plans and details Hospital System Low Voltage Electrical Power Supply + Design Engineering IT system partition Fig T power of medical electrical equipment isolation hospital settings engineering drawings special UV lighting socket and weak institutional arrangements security system installations and lines of fire engineering drawings hospital integrated security access control system engineering drawings positive pressure medical oxygen delivery device engineering drawings HVAC heating ventilation and clean equipment UF works to the drainage and septic tanks Automatic disinfection equipment engineering drawings Hospital surgery, X-ray radiology, ICU, POD clean room design details of the Department of the hospital interior decoration Engineering Graphics Anti-X-ray radiation room, toilet, water tank waterproofing compound - the hospital doors and windows - out-patient cases, such as Taiwan, the design of the node map hospital project cost book.

建设项目设计图主编程：编制医院工程技术设计意见书医院工程功能分区总平面图医院诊室分间平面图和墙身结构工程详图医院低压电气系统图+隔离电源IT系统分区设计工程图医疗电器设备T电源隔离设置工程图医院照明插座和特殊UV机构设置弱电系统装置及线路设防工程图医院消防接控系统综合设防工程图医疗氧气正压配送装置工程图暖通热力通风和UF洁净设备工程图给排水和化粪池自动化消毒设备工程图医院手术、X光放射、ICU、POD部室洁净设计详图医院室内装饰装修工程图防X线辐射房间、卫生间、积水池复合防水-医院门窗-门诊台案等设计节点图医院工程造价书。

The house construction engineering, highway and city road engineering, railroad engineering, bridge engineering, tunnel engineering, airport engineering, underground engineering, water supplies drain the engineering, port wharf engineering etc..

房屋建筑工程、公路与城市道路工程、铁道工程、桥梁工程、隧道工程、机场工程、地下工程、给水排水工程、港口码头工程等。

Molecular Distillation is a kind of high vacuum distillation method, which is suitable for the separation of high boiling, heat sensitivity and viscidity products.

分子蒸馏技术是一种在高真空条件下进行的连续蒸馏过程，适合于分离高沸点、热敏性及具有生物活性的混合物。

They are to the Noughties what yuppies were to the Eighties .

那在六十年代是时髦的，但在八十年代肯定是过时了