查询词典 be in control of

The results show that there will be slight decrease of the control efforts when the mean absolute value or the root mean square value of the optimal control force is taken as the maximum designed control force, while the maximum control force of MR damper can be decreased by 85% compared with the maximum optimal control force. The decrease in the designed control force can not only significantly increase the capability of MR dampers, but also reduce the dimension of MR dampers for pratical application in engineering.

研究表明，当设计值取最优控制力的平均绝对值或均方根值时，MR阻尼器的最大控制力比最优控制力的最大值降低了85%，而控制效果降低不多，可以满足对结构的控制要求；降低最大控制力设计值后，不但可以充分发挥MR阻尼器的出力性能，而且可以缩小MR阻尼器的设计尺寸，便于工程应用。

The susceptible rates of 18 isolated Actinobacillus pleuropneumoniae strains to Florfenicol, Amikacin, Ceftriaxone were 77.78%, 83.33% and 83.33% respectively , which are the first to be chosen in control of PCP.

分离株对氟苯尼考、阿米卡星、头孢曲松敏感的比例分别为77.78％、83.33％和83.33％，它们可作为临床控制猪传染性胸膜肺炎的首选药物。

The biomechanical tests showed that two kinds of artificial bones had not significant difference on compressive strength and Young\'s modulus(P＞0.05),while the flexural strength of nano-nacre artificial bone was less than the control group(P＜0.05).3.The results of CCK-8 showed that the difference were not significant in each group,the proliferation of osteoblast reached the peak at the 5th day;7 days after being co-cultured,the total protein content of study group was higher than control group and blank group(P＜0.05),while the difference between control group and blank group was not significantP＞0.05The difference of alkaline phosphatase activities among three groups was not significant(P＞0.05The SEM view showed that osteoblast attached and grew well in two kinds of artificial bone.4.X-ray photography showed that two kinds of powder started to degrade in 2 weeks;this phenomenon became more appear in 4 weeks,nano-nacre powder degraded faster than micron-nacre powder,while the hole shadow was easy to be found;in 8 weeks,all the femoral holes recovered and returned to normal bone mineral density in all groups.Analysis of tetracycline fluorescent double marks in the hard tissue grinding slices indicated that new bone grew fastest around the bone defect area in study group,while most slowly in blank groupP＜0.05 SEM(scanning electron microscope observation showed that nano-nacre powder degraded more quickly.The same result can be found through the demineralized sections morphometric analysis,and both of the composite artificial bones made from those two kinds of nacre powder had the good connection with the adjacent tissue in rats body without apparent inflammatory response.5.X-ray photography showed that rabbit\'s bone defects healed faster in study group since NNAB implanted than in control group since MNAB implanted.At 24 weeks after operation,bone density in radial defects had nearly accessed to the normal area,while lower in control group,and turned up nonunion in blank group;The checking of BMD showed that results in study group were higher than those in control group at 8,16 and 24 week(P＜0.05), and the difference between the BMD values in study group at 24 week and those in blank group was not significant(P＞0.05).The gross specimens showed satisfactory histocompatibility both in study group and in control group,with bone tissue growing from two sides into the center of implanted materials; Normal slices in HE stain and hard tissue grinding slices in Stevenel\'s blue/Van Geison\'s picro-fuchsin stain showed that the bone growth tendency was better in study group than that in control group,and the medullary cavity had been penetrated to the implanted materials in study group at 24 week;Analysis of tetracycline fluorescent double marks in the hard tissue grinding slices indicated that new bone in both groups grew fastest 8 weeks after surgery,while slow down at 16 week.

纳米珍珠层/消旋聚乳酸复合人工骨与微米珍珠层/消旋聚乳酸复合人工骨分别与成骨细胞共培养后，其各时间点CCK-8法检测值与空白对照无显著差异(P＞0.05)，成骨细胞均在第5天达到增殖高峰期；培养7天后，实验组细胞蛋白含量高于对照组及空白组(P＜0.05)，后两者之间则无显著差异P＞0.05碱性磷酸酶活性在三组间均无显著差异(P＞0.05电镜下可见成骨细胞在两种人工骨上都有良好生长贴附能力。4.X-ray显示两种粉体在大鼠股骨骨洞植入第2周时都开始出现了降解，第4周时更为明显，纳米珍珠层粉较之微米珍珠层粉降解更快，而空白对照组骨洞阴影仍可见，至8周时，则所有组骨洞均己闭合修复，X-ray下已不可见原钻孔痕迹，恢复正常骨质密度；硬组织磨片四环素荧光双标记结果显示纳米珍珠层粉植入组较其余两组在骨缺损区周围新骨生长速度更快，空白组速度最慢P＜0.05电镜观察及常规脱钙切片亦可见到纳米粉体降解较快；由以上两种原材料制得的纳米珍珠层/消旋聚乳酸复合人工骨与微米珍珠层/消旋聚乳酸复合人工骨在大鼠体内均与周围组织结合良好，无明显炎症反应。5.X-ray显示纳米珍珠层/消旋聚乳酸复合人工骨植入兔桡骨缺损区后其骨愈合速度较对照组微米珍珠层/消旋聚乳酸复合人工骨植入的快，至植入术后24周，实验组骨缺损区接近正常骨密度，对照组骨缺损区密度较低，空白组则呈现骨不连状态；骨密度测量结果显示术后8周、16周、24周实验组的骨密度值高于对照组(P＜0.05，24周实验组的骨密度值与术前所测得的正常值无显著性差异P＞0.05动物取材大体所见均显示组织相容性良好，骨组织逐渐由植入材料两端向中央生长；常规切片HE染色及硬组织磨片Stevenel\'s blue/Van Geison\'s picro-fuchsin联合染色均可见实验组骨缺损区长势优于对照组，至术后24周，实验组骨髓腔与材料已呈相交通状；硬组织磨片荧光显微镜下观察，两组材料在术后8周处于骨生长最快速时期，16周时速度开始减慢，术后4、8、16周时实验组的新骨生长速度均较对照组的快

This section discusses when a warrantless search may be legally justified because the person in control of the property is said to have agreed to it.

本节探讨在控制物业人员同意搜查的前提下，没有搜查证而进行的搜查在法律上是合法的。

While we might be dissatisfied, she says, at least we are in control of our own destinies.

她说，虽然我们不是很满意，但至少我们能掌握自己的命运。

To those who make a habit of accommodating others against their better judgment , the author suggests making a weekly list of yeses , noting if your time is well managed , learning to prioritize and set limits and giving up the need to be in control .

本书作者佩雷菲特从世界史的角度，将此次出使作为东方与西方的首次撞击来考察，于是，视野开阔了，可供思考的素材也就相应丰富起来。在作者眼中，这次英国人的出使实质意味着当时的天下唯一的文明国家

According to the wire electrode on the trajectory of the different forms of control, WEDM can be divided into three types:* is a copy-control, cutting their lines in advance to create the shape of the workpiece and the same mode *, When the rough machining parts and die at the same time * Clamping in the machine tool table, in the process of cutting wire electrode tightly * close to the edge of model for mobile track, thus cutting out the model * with the same shape and precision to work; another One is the optical tracking control, the cutting in line before the first parts in accordance with drawings by a certain ratio of enlarge depicts an electro-optical tracking maps, drawings will be processed when the machine electro-optical tracking placed on the stage, followed on the stage The first photo has to follow the ink line graphics track movement, and then through the use of electrical, mechanical linkage to control the machine tool table work together with the relative electrode wire Xiang Sixing do sports in order to cut out the pattern and shape of the workpiece to the same; a re - Is a digital process control, advanced digital automatic control technology, machine-driven process in accordance with the geometry of the workpiece before the parameters of good pre-processing CNC automatic completion of the processing, production do not look like without drawing board also plans to enlarge, in front of more than two Control in the form of higher precision processing and broad scope of application, at home and abroad for more than 95% of WEDM have been using digital technology.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是*模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的*模，加工时把工件毛坯和*模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着*模边缘作轨迹移动，从而切割出与*模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95％以上的电火花线切割机床都已采用数控化。

Wire electrode based on the trajectory of the different forms of control, WEDM can be divided into three types: one is shaped by the imitation controlled cutting in line in advance and work to create the same shape by mold, when processing the workpiece at the same time rough and on the mold clamping in the machine tool table, in the process of cutting wire electrode tightly against the mold on the edge of the track for the mobile, thus cutting out and die on the same shape and precision to the workpiece; another One is the electro-optical tracking control, to carry out the cutting line, before the basis of certain parts to enlarge the proportion of drawings depicts an electro-optical tracking map-processing machines will be placed in design stage of electro-optical tracking, tracking platform Photoelectric first line of graphics has always been to follow the track of the Mexican campaign, and then through the use of electrical, mechanical linkage to control the machine tool table, together with the workpiece so相似形wire electrode relative movement, thus cutting out the same shape and design to the workpiece; again a digital control, the use of advanced automatic control of digital technology-driven machine tool in accordance with the pre-processing parameters according to the workpiece geometry pre-processing procedures for the preparation of a good CNC auto-complete processing, the production does not require appearance on board the need to map to enlarge map of the previous two form of control has a higher machining accuracy and a broad range of applications, both at home and abroad more than 95% have adopted WEDM NC.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是靠模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的靠模，加工时把工件毛坯和靠模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着靠模边缘作轨迹移动，从而切割出与靠模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作靠模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95%以上的电火花线切割机床都已采用数控化。切割属电加工范畴，是由前苏联人发明的，我国是第一个用于工业生产的国家，当时由复但大学和苏州长风机械厂合作生产的这是最早的机型叫复旦型，我们国内在此基础上发展了快走丝系统。欧美和日本发展了慢走系统LS

Some things proved they never change as politicians and industrial leaders once again assumed control of the sub-net of the known world, pulling the strings of the marionettes to make the outcomes of whatever situation they pleased be in favor of them.

越是往纵深走，那里地道的技术装备就越是先进，但是没有人敢再使用这些设施了，因为他们畏惧于他们可能在那里发现的结果，他们胆怯于他们将找到的却丝毫没有心理准备去面对的答案。

And Cartier-Bresson may be a compassionate photographer, but he nevertheless is in control of what, who and how to capture with his camera.

Cartier-Bresson也许是一位充满同情心的摄影者，但是他仍然控制着该去拍什么、拍谁和如何拍。

Cynanchum Lingtai apricot production in the average weight 65 grams, the brightly-colored fruit, juicy rich, sweet-sour taste, sweet from the nucleolus, when the late Qing Dynasty famous Shaanxi, Gansu provinces, the Qing imperial court Tongzhi tribute for years.

灵台生产的牛心杏平均单果重65克，果实色泽鲜艳，汁多味浓，甜酸适口，离核仁甜，清末时就驰名陕、甘两省，清同治年间曾为朝廷贡品。

Chenopodium album,Solanum nigrum, and Amaranthus retroflexus were very susceptible to the herbicides. Polygonum persicaria and Abutilon theophrasti were relatively less susceptible to the herbicides, and Lycopersicon esculentum was not susceptible to it. The relationship between reduction rates of weed biomass and PPM values of weed leaves 2,4, and 6 days after treatment was established.

供试的6种杂草对该混剂的敏感性存在显著差异：红心藜Chenopodium album、龙葵Solanum nigrum和反枝苋Amaranthus retroflexus对该混剂最敏感，ED90值分别为47.65、71.67和29.17g/hm2；春蓼Polygonum persicaria和苘麻Abutilon theophrasti敏感，ED90值分别为96.91、114.20g/hm2；而番茄不敏感。