查询词典 Acme screw thread

A container (1) containing a coating composition the container comprising a container body (21) and a lid (7), the lid comprising a collar (11) and a disc (12), the container body having an opening provided with a screw-thread (5) cooperable with a screw-thread (6) on the collar and closeable by said lid characterised in that the disc is formed of polyethylene terephthalate which is sufficiently transparent to allow the coating composition to be visible therethrough.

一种容纳涂敷组合物的容器(1)，该容器包括容器主体(21)和盖子(7)，该盖子包括套环(11)和盘(12)，该容器主体具有一设置有螺纹(5)的开口(2)，该螺纹可与该套环上的螺纹(6)配合使用，并且该容器主体可由该盖子封闭，其特征在于，该盘由聚对苯二甲酸乙二醇酯形成，其足够透明以便使得透过该盖子可看到该涂敷组合物。

It can processing different kinds of decorative patters on the surface of hollow tubular(including circular tube and hexagon socke pipe) such as screw thread, screw thread crosswire, starry sky,ect. There are more than 30 kinds of patters.

特点：针对空心管表面花纹连续制作的最佳设备，能在管状物表面加工螺纹、螺纹交叉线、弄分点状花，满天星花等不同花纹款式，款式多达三十多种以上。

The allowable processing length of the wooden sticks is 60mm to 1800mm, the allowable diameter is 15mm to 120mm and the length and diameter can be customized according to the requirements of the customers. For instance, we can deal with the drilling, processing of the round wood, American-style screw thread and Italian-style screw thread to meet the different demands by the customers.

木柄类产品可加工的长度是60 MM-1800 MM ，可加工的直径是15 MM-120 MM，长度和直径都可以根据客户的要求定做，例如钻孔、加工圆头、美式螺纹、意大利式螺纹等，满足客户的众多需求。

The numerical analyses also showed that VCR element has the best distribute mixing effect and normal double-thread screw element take the second place, normal double-thread screw element is the weakest among them.

模拟结果表明：常规双头螺纹元件分散混合能力最强，常规三头螺纹元件次之，VCR元件最弱；而VCR元件分布混合能力最强，常规三头螺纹元件次之，常规双头螺纹元件最弱。

The plastic go down the hopper smoothly and is gripped by the thread of the screw. It is forced to go toward the direction of the gear end along with the rotation of the screw. A mechanical transferring process is formed. During the running of the plastic from the feed port to gear end, a high pressure is formed in the process of plastic curing due to the gradual decreasing of the thread depth and the resistance of filter gauze, splitter plate and gear end. The high pressure helps to press the raw material and improve its heat conductivity performance and the quick melting of the plastic, at the same time, the gradual increasing pressure can help the gas which is among material particles exhausted from the air holes.

在压力升高的同时，塑料一方面被外部加热，另一方面塑料本身在压缩、剪切、搅拌的运动过程中，由于内磨擦力也产生了大量的热，在外力和内力的联合作用下，塑料温度逐渐增高，其物理状态也经历了玻璃态--高弹态--粘流态的变化，一般地说来，在加料段中主要是玻璃态，在螺杆螺纹逐渐减少的中间部分压缩段中，物料主要处于高弹状态，同时也逐渐的熔融，而物料到压缩段后部和化段作用处于粘流态了，这时我们称塑料已完全塑化了，由螺杆推力作用将塑化的塑料定压定量的从机头中挤出。

The main products are: thread cutting tools: the machine tap, pipe thread tap, nut tap, tap spiral groove, spiral pointed tap tap ladder, hand tap, tap extrusion, screw tap sets, L-tap, tap straight groove, roll teeth as well as increase the tap tap, tap lengthened and undertake kinds of non-standard and special-shaped screw instrument.

主要产品为：螺纹刀具：各机用丝锥、管螺纹丝锥、螺母丝锥、螺旋槽丝锥、螺尖丝锥梯形丝锥、手用丝锥、挤压丝锥、螺套丝锥、左旋丝锥、直槽丝锥、滚牙丝锥以及各种加大丝锥、加长丝锥，并承接各种非标及异型螺纹工具。

This study discusses the economic and society benefits of popularizing and using the Y small diameter cold-rolling screw thread steel reinforcing bar in the enterprises by analyzing the technology parameters,the structure characteristic and the principle and the technology economic of the small diameter cold-rolling screw thread steel reinforcing bar .

通过对Y形小直径冷轧螺纹钢筋机组的技术参数、结构特点、工作原理、试验分析和技术经济分析，论述了在企业推广使用小直径冷轧螺纹钢筋的经济效益和社会效益。

The study on drilling collar screw-stick,analysis of drilling collar screw thread and test of material and thread parameter have been done.

对钻铤粘螺纹事故进行了调查研究，并进行了宏观形貌和材质分析；对新钻铤材质和螺纹参数进行了检验，并采用不同旋螺纹扭矩对新钻铤试样进行了上卸螺纹试验。

The design of the device using NC Lathe CA6140 control, part of the main transmission system using AC spindle motor and graded by the pulley driven spindle gearbox, through the inverter and gearbox to achieve sub; Feed System used by stepper motor driven ball screw slowdown after campaign vertical feed system through a gear after the ball screw drive, in the horizontal feed system through two gear-driven ball screw; Tool to automatically transfer tool carrier (4-position), thus achieving automatic tool change; by MCS-51 series 8051 data to be dealt with. from the I / O interface stepper pulse output signal to control the feed rate and itineraries; In order to maintain the function of cutting thread, to the outer end of spindle or other appropriate location loaded pulse generator; Lathe will be transformed into Tailstock manually controlled electric Tailstock.

本设计利用数控装置对CA6140普通车床进行控制，主传动系统部分采用交流调频主轴电动机经带轮及分级齿轮变速箱驱动主轴，通过变频器和齿轮变速箱实现分段无级变速；进给系统采用步进电机通过减速后驱动滚珠丝杠运动，在纵向进给系统中通过一级齿轮减速后驱动滚珠丝杠，在横向进给系统中通过二级齿轮减速驱动滚珠丝杠；刀架改为自动转位刀架从而实现自动换刀；通过MCS-51系列8051单片机对数据进行计算处理，由I/O接口输出步进脉冲信号控制进给速度和行程；为了保持切削螺纹的功能，要在主轴外端或其它适当部位装上脉冲发生器；将车床的手动尾座改造成为可控电动尾座。

With the screw rotation and meshing, the sealed space in the pump suction side evolving to inhalation chamber inclose one of the liquid, and from inhalation of room along the screw axis moved continuously push from client, will be closed in the space continuous discharge of liquid, like a nut in the thread when he was constantly turning the situation to move forward, this is the basic working principle of the screw pump.

随着螺杆的转动和啮合，这些密封空间在泵的吸入端不断形成，将吸入室中的液体封入其中，并自吸入室沿螺杆轴向连续地推移至排出端，将封闭在各空间中的液体不断排出，犹如一螺母在螺纹回转时被不断向前推进的情形那样，这就是螺杆泵的基本工作原理。

We are forbidden from giving money to these shoeless, skinny children, as this will perpetuate begging.

向光着脚，骨瘦如柴的孩子施舍是不可以的，因为要招来无休无止的乞讨。

It would be hard not to fall victim to some sharpeyed policeman.

要想不被某个目光锐利的警察抓到，谈何容易。