- 更多网络例句与纤维的相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Notch and groove were produced on fiber's surface by plasma's pHysical bump and corrasion, meanwhile oxygenic or nitrogenic radicals were also grafted on the surface. Through hydrolyzation, acetate fiber's surface will be denuded by cellulase enzyme. Surface of the fiber will be granulated and specific surface area will be enlarged by plasma and enzyme treatment, therefore obviously improve fiber's surface performance.
等离子体对纤维的物理撞击和表面刻蚀使纤维表面产生凹坑和沟槽，同时可在纤维材料表面引入含氧或含氮基团；而纤维素酶对纤维素的水解作用，促使纤维表面被剥蚀；等离子体与生物酶处理都能使纤维表面粗糙化，比表面积增加，使纤维的表面性能得到明显改善。
-
The results show that the compound conductive fiber has typical structure of sheath-core consists of black greened polyaniline electric conductive deposition as the skin and the white polypropylene matrix fiber as the core, which makes the compound fiber preferable physical mechanical property. The intensity and the elongation ratio of the electric conductive fiber are decreased but the thermal stability is enhanced after modified. The compound fiber has the good acid resistance but poor base resistance. The thermal stability of the compound fiber prepared by 4-methyl-benzene sulfonic acid is better than that prepared by hydrochloride acid. Moreover, the compound fiber can be re-doped by other organic or inorganic acid after freed from the adsorbed acid. Furthermore, the electric conductivity of the compound fiber decreases with the temperature increasing but hardly changed with the humidity. The adsorptive ability and therefore the content of the polyaniline, the constant of electric conduction, and the durability of the compound fiber can be enhanced by thinning the diameter, section heteromorphosis, section heteromorphosis and plasma treatment of the surface or blending with COPET of the fiber.
结果表明：复合纤维是聚丙烯与聚苯胺的共混体系，具有典型的皮芯型结构，皮层为墨绿色的聚苯胺沉积层，形成连续的导电通道，芯层为白色的聚丙烯基质纤维，提供物理机械性能；导电改性后纤维的强度、强力和伸长率均有下降，但热稳定性得到提高；复合纤维的耐酸性比耐碱性好，以对甲苯磺酸做掺杂酸比盐酸掺杂聚苯胺热稳定性好，脱掺杂后的复合纤维，可用其它无机酸或有机酸进行再掺杂；复合导电纤维的电导率随温度升高降低幅度较大，但几乎不受湿度影响；基质纤维细旦化、截面异形化、表面等离子体处理或共混COPET等改性处理均能提高纤维的吸附性，进而提高复合纤维表面聚苯胺含量、电导率和耐久性。
-
Several kinds of plant fiber,such as meyer sedge fiber,lotus root fiber, mulberry fiber ,bamboo fiber,and banana fiber are introduced from the aspects of extraction ways,fiber characteristics and application.
文章介绍了几种植物纤维如乌拉草纤维、藕丝纤维、桑皮纤维、竹纤维及香蕉纤维的提取方法、纤维性能和应用情况。
-
Based on the spinneret holes,spinning liquid, spinning technology ,it analyzed the influence of these factors to the fiber profiles,fiber performances and the use of profiled fiber.
文章从喷丝孔形状、纺丝液性质、纺丝工艺条件等方面分析了这些影响因素对纤维截面、纤维性能及纤维用途的影响，并以几种典型异形纤维为例阐述了不同截面纤维的用途，指出异形纤维是具有广阔前景的一种差别化纤维。
-
OBJECTIVE: To introduce the sorts of biomedical fibers, collagenous fibers, chitin fibers polyactic acid fibers, etc., and their preparation,properties and application respectively, and suggest China to pay attention to the research and development of biomedical fiber.
目的：介绍生物医学纤维的种类及甲壳素纤维、骨胶原纤维、聚乳酸纤维等主要生物医学纤维的制备技术、性能和用途，并建议国内应重视生物医学纤维的研究与开发。
-
The details of the research include: By studying the structure of the natural bamboo fiber, make the basic morphological structure and the degree of crystallization clear; By studying the mechanical property of the fiber, make the feature of mechanical property of the natural bamboo fiber clear; By studying the mechanical property of the pure yarn and its blends, make the feature of mechanical property of the yarn clear; and we also study the mechanical property changes of the pure yarn and its blends in the hygrometric state different temperature state and after mercerization and alkali shrinkage.
研究内容包括：通过对天然竹原纤维结构的研究，探明竹原纤维的基本形态特征和结晶度等特征；通过对天然竹原纤维机械性能的研究，探明竹原纤维的力学性能特点；通过对竹原纤维纯纺、混纺纱线力学性能研究，探明其纱线的力学性能特点；研究在湿态条件下，竹原纤维纯纺、混纺纱线力学性能的变化特点；研究在不同温度条件下，竹原纤维纯纺、混纺纱线力学性能的变化特点；研究在丝光、碱缩条件下，竹原纤维纯纺、混纺纱线力学性能的变化特点。
-
Materials and methods: The lung preparation of 6 SARS death patient (died in 9,14,20,29,33,38d) and 6 macaque model (killed in 7,12,14,14, 32, 35d)were objects. Pathological changes, collagen fibers, lattice fibers, elastic fibers, collagen I and III in lungs and fine structure changes were studied by routine H.E dyeing, trigeminy dyeing, trinitrophenol- sirius red staining and polarization microscope, electron microscope and image analysis. Expression of Vimentin、 TGFβ_1、 TNF α、 IL-1β and MMP-2 were detected by immunohistochemistry.Results:1. Pathological changes of SARS death patient.
材料与方法：以6例SARS死亡患者(分别于发病后9、14、20、29、33、38d死亡)和6只猕猴实验模型(分别于染毒后7、12、14、14、32、35d活杀取材)肺标本为对象，应用H.E染色、三联染色、苦味酸-天狼猩红-偏振光法、电镜和图像分析等技术，对比性观察SARS肺组织病理变化和纤维化的病理过程、胶原纤维、网状纤维和弹力纤维的变化特点、Ⅰ型与Ⅲ型胶原纤维的数量和分布规律，旨在探讨SARS肺纤维化的病变经历过程及特点；利用免疫组织化学和形态计量学技术检测SARS死亡患者肺脏的Vimentin、TGFβ_1、TNFα、IL-1β和MMP-2等与炎症反应和纤维化相关活性因子，探讨其发病机制。
-
The experimental results are summarized as follows: the tensile strengh and bending strengh of steel fiber reinforced lightweight aggregate concrete can be improved significantly by the addition of steel fiber; to some extent ,the addition of steel fiber can also increase the compressive strength ,although little , it radically improves the compressive toughness , and the steel fiber reinforced lightweight aggregate concrete will not fall apart with cracks; with the increase of the volume fraction of steel fiber, the elastic modulus is also rising somewhat; Poisson's ratio is influenced little with the addition of the steel fiber and the effect regularity displays unconspicuously.
本文试验研究结果可归纳如下：钢纤维的加入能明显提高钢纤维轻骨料混凝土的抗拉强度和抗折强度；掺入钢纤维使钢纤维轻骨料混凝土的抗压强度有一定程度的提高，增长幅度不大，但抗压韧性却有很大改善，使钢纤维轻骨料混凝土裂而不散；钢纤维轻骨料混凝土的弹性模量随钢纤维体积率的增大有一定提高；泊松比受钢纤维的加入影响不大，规律性不明显。
-
Take polyester short fiber, nylon short fiber and cotton powder short fiber forexamples, a study was made on the influence of content and kind of short fibers onphysical and heat aging properties of chlorinated cis-1, 4-polybutadiene composites.
以氯化顺丁橡胶为基体橡胶材料，与聚酯短纤维、尼龙短纤维、棉粉短纤维复合，研究了短纤维的用量和种类对短纤维-氯化顺丁橡胶复合材料力学性能影响。
-
Firstly, take polyester short fiber, nylon short fiber and cotton powder short fiber for examples, a study was made on the influence of content and kind of short fibers on physical and heat aging properties of short fiber-CR composites. The experiment results showed that the rigidity of the composite increased as the content of the fiber increased, and the tear strength, the modulus at 20% in L direction also increased; thereinto, the reinforcement effect of nylon short fiber was the best, and the cotton powder short fiber was the worst.
第一，以聚酯短纤维、尼龙短纤维、棉粉短纤维为例，研究了短纤维的用量和种类对短纤维-氯丁橡胶复合材料力学性能、耐热性能及其溶胀性能的影响；结果表明，随纤维含量的增加，短纤维-CR复合材料的硬度不断增大；在L向拉伸时，撕裂强度、定伸应力不断提高；尼龙短纤维的补强效果优于其它两种，棉粉短纤维的最差；随纤维含量增加，短纤维-CR复合材料整体耐热老化性得到了极大提高，其中尼龙短纤维-CR复合材料的耐热老化性明显优于其它两种；随纤维含量的增加，短纤维—CR复合材料的耐溶胀性能明显提高；短纤维-CR复合材料的性能呈现明显的各向异性。
- 更多网络解释与纤维的相关的网络解释 [注：此内容来源于网络，仅供参考]
-
fibrous：纤维的
fibrotic 纤维变性的 | fibrous 纤维的 | fibrovascular 维管的
-
filamentary：细丝的/单纤维的/似丝的
filament /细丝/细线/单纤维/花丝/白热丝/丝状物/ | filamentary /细丝的/单纤维的/似丝的/ | filamentous /细丝状的/如丝的/纤维所成的/
-
fibered：有纤维的
fiberboard 纤维板 | fibered 有纤维的 | fiberfaced 可见纤维的
-
fiberless：无纤维的
fiber-board 硬纸板;纤维板 | fiberless 无纤维的 | fibre optics 纤维光学
-
fibreless：无纤维的
fibrefill /纤维填塞物/ | fibreless /无纤维的/ | fibremeter /纤维定量喂给控制装置/
-
fibrillated：有微细纤维的
"原生质纤维说","fibrillar theory of protoplasm" | "有微细纤维的","fibrillated" | "纤维蛋白","fibrin"
-
fibrillose：小纤维的
fibrilliform 小纤维状的 | fibrillose 小纤维的 | fibrillous 纤丝状的
-
neurofibrillar：神经原纤维的
neurofibrilla 神经原纤维 | neurofibrillar 神经原纤维的 | neurofibroma 神经纤维瘤 纤维神经瘤
-
fibred：有纤维的/纤维质的
fibrecord /纤维绳索/ | fibred /有纤维的/纤维质的/ | fibrefill /纤维填塞物/
-
fibred：纤维的
纤维状假导管 Fibre tracheid | 纤维的 Fibred | 小纤维 Fibrils