活塞

According to the present invention, there is an advantage in that an outer diameter of the piston (20) is not changed during its assembling process, since the piston pin (30) can be fastened to the piston (20) merely by causing only the caulking portions (26) of the piston (20) to be subjected to the plastic deformation.

根据本发明，有一个优点就是，既然活塞销(30)仅仅通过活塞(20)的箍紧部分(26)的塑性变形就能够被固定在活塞(20)上，因此活塞(20)的外径在其装配过程中不会变化。

The results show that the force coefficient, the equivalent inductance and resistance are constant when the moving magnets oscillate in an operating region.

结果表明：推力系数在一定的动子行程内是基本恒定的，在上死点附近，推力系数有减小趋势；等效电感和电阻在一定的工作电流内是基本恒定的；直线电机等效电阻及电感的波动对活塞位移自传感器的输出几乎无影响，推力系数的波动影响活塞位移自传感器输出幅值的大小；若要提高直线压缩机活塞位移自传感器的输出精度，需要对模拟电路参数进行微调，以确保输出不失真，同时需要在活塞上死点附近对自传感器的输出进行修正。

In this paper, we put forward a new kind of mechanism based on the analysis of the movement regularity of traditional horizontal reciprocating compressor which combined both magnetic suspension technique and linear driving technique. It takes advantage of the magnetic field force acted on the plunger, which will generates moment of couple to balance the corresponding moment ...

分析了传统卧式往复压缩机活塞连杆运动的规律，设计了一种集磁悬浮和线性驱动技术为一体的往复磁悬浮式压缩机机构，该机构利用作用于活塞连杆上的磁场力，使其力偶矩与连杆活塞的重力矩相平衡，使活塞对缸体的正压力趋向于零或等于零的理想状态，从而使摩擦副间的摩擦力达到最小。

The amplitude-frequency characteristic is given and the stability of the piston motion is analyzed by the phase plane method.

建立活塞组件动力学模型，导出了活塞振动方程，研究了活塞的幅频特性并运用相平面法分析了活塞运动的稳定性。

The piston pin fits through one side of the piston, through the small end of the rod, and then through the other side of the piston.

活塞销贯穿活塞，把连杆小头与活塞连在一起，并将连杆保持在活塞中心的适当位置处。

Machining process and general information:· General Information – Tooling o Plan to have own engineering group as company expands o Hwasung is subcontracted to do engineering currently o Uses same cutting tools as in Korea facility – all diamond o Regrind tools if can o Hwasung has capability to surface grind, repair dies, and make molds with wire EDM process · General Information – Machining o Boundary samples are used: okay, borderline, not good o Quality room has separate windows for incoming and outgoing parts o New equipment will be coming in from FM LaGrange plant o Each operation has pictures and job instructions for what to check and which gage to use to check part o Parts are manually loaded into machine or pallet, depending on line o Auditor checks parts for verification: after operator checks part, puts in bin, auditor checks part and reloads back on line o Have tool management system o A pokeyoke check is used for orientation prior to loading o Machines are guarded o Mostly have CNC machines o Manual chip collection systems o If automated, have robots with grippers to load/unload parts from pallets o After final inspection, operator visually inspects and loads onto plastic dunnage with the crown up and loads into the washer o Repairs: filing down of burrs or sharp edges after anodizing the crown o Have 2 Excello machines for special machining of the pin bores o 2.7% scrap for gasoline pistons o Cycle time is 18 seconds for gasoline piston o Process – Wash o Spray system o 4 stations: heated wash, wash with degreaser, 2 rinse stations o Uses RO water o Operator blow dries piston and puts on dunnage with crown up o Parts wheeled into coating room o Needs major improvements here o Chemical analysis done for bath in chemical room o Comments/Observations: o Relatively small piston facility, but plans for additional space.

加工工艺和一般信息：·–的一般信息工具 o 有自己的工程集团，随着公司的扩展计划 o Hwasung 是分包做当前工程 o 用途相同的扦插工具，如在韩国设施–所有钻石 o 回收料工具如果可以 o Hwasung 已表面研磨，修复模具，和模具丝电火花加工能力过程·一般信息–加工 o 界限示例用于：好交界，不好 o 质量房间有单独的窗口传入和传出的部件 o 新设备会在来从调频拉格朗日植物 o Each 操作具有图片和工作说明的什么复选，计为使用检查部分 o 部件是手动加载到机器或托盘，取决于行 o 审计检查验证零件：置于 bin，运算符检查部分后，核数师检查部分并重新加载回行上 o 有工具管理系统 o 为 pokeyoke 复选用于在加载之前的定位 o 机被保护 o Mostly 有数控机床 o 手动芯片收集系统 o 自动，如果有与要加载/卸载部分从托盘 grippers 机器人 o 后最终检验，运算符将直观地检查并加载到与塑料衬垫冠了与到洗衣机负荷 o 修复：提交下毛刺或锋利的阳极氧化冠后 o 有 2 Excello 机特别加工的销孔 o 2.7%废料的汽油活塞 o 周期时间是为汽油活塞式 18 秒 o 过程–洗 o 喷射系统 o 4 站：加热洗、与脱脂剂洗、 2 冲洗站 o 使用反渗透水 o 运算符吹干活塞式并将了放冠衬垫 o 部件轮式进涂层房间 o 需要重大改善在这里 o 为在化学的房间里浴做的化学分析 o 注释/结论： o 相对小活塞式设施，但额外的空间的计划。

The sinusoidal pulsed flow generator is composed of a constant discharge pump and a piston cylinder fluctuating sinusoidally in volume .

正弦脉冲流发生器由恒流泵和正弦容积变化活塞缸构成，电动活塞泵用凸轮传动给出恒定流量，活塞缸活塞用凸轮或曲轴连杆传动使缸容正弦变化。

Because of the connecting rod is one of dyadic engine of piston and main compression engine part, whose larger end hole and crank shaft link up , the small head hole links up by the wrist pin and the piston , whose effect is that the piston gas pressure is transmitted to the crank shaft , collect crank shaft gas in driving but setting a piston in motion to compress a cylinder.

本文主要论述了液压设计。因为液压是活塞式发动机和压缩机的主要零件之一，其大头孔与曲轴连接，小头孔通过活塞销与活塞连接，其作用是将活塞的气体压力传送给曲轴，又收曲轴驱动而带动活塞压缩汽缸中的气体。

Because of the connecting rod is one of dyadic engine of piston and main compression engine part, whose larger end hole and crank shaft link up , the small head hole links up by the wrist pin and the piston , whose effect is that the piston gas pressure is transmitted to the crank shaft , collect crank shaft gas in driving but setting a piston in motion to compress a cylinder.

因为连杆是活塞式发动机和压缩机的主要零件之一，其大头孔与曲轴连接，小头孔通过活塞销与活塞连接，其作用是将活塞的气体压力传送给曲轴，又收曲轴驱动而带动活塞压缩汽缸中的气体。

The dual-piston valve comprises a valve housing having a pair of piston operation spaces defined therein and a pair of pistons disposed in the piston operation spaces of the valve housing such that the pistons can be vertically moved to open or close inner and outer outlet ports formed at a cylinder.

该双活塞阀包括：阀壳，其中限定有一对活塞运行空间；以及一对活塞，其设置在阀壳的活塞运行空间中，以使活塞能垂直移动以打开或关闭在气缸处形成的内出口和外出口。

Chrysanthemum of 10 thousand birthday is lax to edaphic requirement, with the arenaceous qualitative loam with fecund, good drainage had better.

万寿菊对土壤要求不严，以肥沃。排水良好的砂质壤土为好。

He unstepped the mast and furled the sail and tied it.

他拔下桅杆，把帆卷起，系住。