模拟计算机

According to the demand of high magnetic field power supply, reference is increased with a set ramp rate and stops at a set stable value, so reference system is composed of digital setting and digit to analog converting circuit. But the stability of reference is mostly guaranteed by the performance of D/A circuit, so D/A circuit is particularly studied in reference system. The scheme of D/A circuit, the selection of DAC and its voltage reference, hardware anti-jamming design and PCB design are discussed in detail, and software of remote control and PLC are discussed in brief. Zero-flux DC current transformer well satisfies the demands of the high stability of Load current detection unit, so the principle of zero-flux DC current transformer is analyzed; in the mean time a project which detects the long term stability is designed. During 8 hours, analog signal which is detected with high precision digit multimeter is recorded in computer at 1HZ frequency by GPIB communication. The drift error source and related parameters are explained in the compare-amplify part. Detailed subtraction circuit is designed; also amplifier chip and periphery components are selected and verified according to the theory of error analysis.

根据强磁场电源的需求，参考源应按照软件设定的斜率逐渐上升到设定稳态值，则参考源系统应由数字给定和数模转换电路两大部分组成，而参考源的稳定度主要依靠完成数模转换功能的模拟电路的性能来保证，因此本文对参考源系统的研究以数模转换电路为重点，分别从电路方案的确定、数模转换芯片及其基准电压源的选取和验证、电路板硬件抗干扰和PCB设计几方面进行了论述，然后对数字给定部分的远控组态和PLC程序设计作了简要介绍；采用零磁通原理的直流电流转换器很好地满足了对负载电流检测单元高稳定度的需求，本文详细分析了零磁通检测的原理，并在选定此种类型电流转换器的基础上设计了一套检测长期稳定度的方案，8小时内以1秒为采样周期，通过计算机Labview程序和高精度数字电压表的GPIB通讯，将被高精度数字电压表数字化后的模拟信号采样值连续记录至计算机中；比较放大环节简要阐述了漂移产生的原因和相关参数指标，确定了具体的减法电路形式，并根据误差分析理论对运算放大器和外围元器件进行了选取和验证。

Last, computer simulation study of the interaction disciplinarian of laser and myocardium tissue has been made by using computer simulate experiment study method.

最后，利用计算机模拟实验研究的方法对激光与心肌组织的作用规律进行了计算机模拟研究。

The base of computer culture, c programmer, fundamentals of analog electronic circuits, fundamentals of digital electronic circuits, data structure, principles of computer composition, operating system, discrete mathematics, computer network, principles of microcomputer, 8086/8088 macro assembler language; multimedia technology; the principles of database; oopl( errorobject oriented programming language); fundamentals of compiling; software engineering; numerical computational method; mcs51/96 principle of single-chip computer; artificial intelligence; computer system organization; digital interface and digital circuits; java programming language; data structure; operating system; computer network; technology of electronics, etc.

计算机文化基础、c语言程序设计、模拟电路基础、数字逻辑电路基础、数据结构、计算机组成原理、操作系统、离散数学、计算机网络、微型计算机原理、8086/8088宏汇编语言程序设计、多媒体技术、数据库原理。面向对象语言程序设计，编译原理，软件工程基础，数值计算方法、mcs51/96系列单片机原理与应用、人工智能、计算机系统结构、数子接口技术与电路、数据库设计基础 java语言，数据结构，操作系统，计算机网络，电子技术等。还有一些选修的课比如：tcp/ip网络协议分析基础、oracl数据库原理，db2数据库原理等。

Monte Carlo computer simulation of grain growth is very important in research of grain growth.

晶粒生长过程的蒙特卡罗法计算机模拟是研究晶粒生长过程的重要内容，而Voronoi模型的建立是该计算机模拟的关键。

the digitized mapping technique is to combine the field data collection system with the computer assisted mapping system in surveys by computer technology.it aims to realize the information collected and processed digitally and automaticaity.the digitized mapping technique can cut short the working time,lighten the labor intensity and enhance the precision of the productions.the system consists of three parts,such as data input,data processing and data output.the survey-record digitized mapping technique is widely used in the digitized mapping working pattern.for its superiority over traditional plane-table mapping in accuracy and efficiency,the large scale digital mapping is becoming more and more popular.compared with traditional analogue mapping,digital mapping has more quality control pivotai points,and its contents and methods are more complex.with the appearance of new technology gps ,the coordinate of different levels controlling points may be surveyed in high precision and it has been applied widely in topographic survey.the operation process of gps electronic tachometer is introduced and its application in topographic survey is br

计算机应用论文，计算机论文， rtk ，全站仪，数字测图，地形测量， gps论文摘要：数字测图是在测量工作中利用电子计算机技术将野外数据采集系统与内业机助制图系统相结合，其目标是实现信息采集处理的数字化、自动化、信息化。数字测图可以缩短作业时间，减轻劳动强度，提高成果精度。数字测图系统主要由数据输入、数据处理和数据输出3部分组成，数字测图作业模式中测记式数字测图应用最为广泛。大比例尺数字测图正以其测图精度高，成图速度快等优势逐步的取代传统的，以平板仪为主的模拟测图。与传统的模拟测图相比，数字测图的质量控制关键点更多、内容与方法更为复杂。gps 新技术的出现，可以高精度并快速地测定各级控制点的坐标，在地形测量中已得到广泛地应用。本文介绍了gps 配合全站仪的作业流程，简要阐明了其在地形测量中的应用。在利用实测数据成图的过程中，解决一些常见的问题，并给出解决的办法及依据，同时给出一些有益的结论，以适应实际使用的需要。

In this dissertation the"Penalty"finite element method was employed to compute the velocity of the three-dimensional flow of power-law fluid in a profile die. In order to decrease the needed computer memory and raise the stability of numerical simulation, a set of decoupled methods such as PFEM, pseudo-body force method and transformation of momentum equation to the elliptic equation was developed to establish the general finite element equations to compute the distributions of velocity and viscoelastic stress of the three-dimensional viscoelastic flow of the Phan ThienTanner fluid in a profile die. During numerical simulation of the extrudate swell of the PTT fluid, the flow in the die and out of the die was analyzed separately, which demands less computer memory.

本文建立了求解挤出口模内幂律流体流动速度场的通用三维罚有限元模型；对于非线性粘弹性的Phan Thien-Tanner流体，为了降低模拟计算对计算机硬件的要求，并使模拟计算更加稳定，采用了一种去耦算法，包括罚有限元方法、拟体力方法和动量方程的椭圆类方程转化方法，并建立了求解速度场和粘弹性应力场的总体有限元方程；对于PTT流体的挤出胀大问题，提出了挤出胀大熔体口模内外分离模拟法，这样可以显著降低数值模拟对计算机硬件的要求。

In this dissertation the"Penalty"finite element method was employed to compute the velocity of the three-dimensional flow of power-law fluid in a profile die. In order to decrease the needed computer memory and raise the stability of numerical simulation, a set of decoupled methods such as PFEM, pseudo-body force method and transformation of momentum equation to the elliptic equation was developed to establish the general finite element equations to compute the distributions of velocity and viscoelastic stress of the three-dimensional viscoelastic flow of the Phan ThienTanner fluid in a profile die. During numerical simulation of the extrudate swell of the PTT fluid, the flow in the die and out of the die was analyzed separately, which demands less computer memory. The key techniques used in numerical simulation of the three-dimensional extrusion from dies such as decision of boundary conditions, creation of initial velocity field, selection of penalty factor, high Weissenberg number problem , regeneration of the free surface were studied in detail.

中文题名聚合物异型材口模挤出三维流动研究副题名外文题名 Study on three-dimensional flow of polymer melts during the process of profile extrusion from dies 论文作者涂志刚导师柳和生包忠诩教授学科专业材料加工工程研究领域\研究方向学位级别博士学位授予单位南昌大学学位授予日期2001 论文页码总数148页关键词挤出成型聚合物材料挤出口模聚合物异型材馆藏号BSLW /2003 /TQ320 /9 本文建立了求解挤出口模内幂律流体流动速度场的通用三维罚有限元模型；对于非线性粘弹性的Phan Thien-Tanner流体，为了降低模拟计算对计算机硬件的要求，并使模拟计算更加稳定，采用了一种去耦算法，包括罚有限元方法、拟体力方法和动量方程的椭圆类方程转化方法，并建立了求解速度场和粘弹性应力场的总体有限元方程；对于PTT流体的挤出胀大问题，提出了挤出胀大熔体口模内外分离模拟法，这样可以显著降低数值模拟对计算机硬件的要求。

The statistic results show that the cost of experiments doubled every ten years because the price of the laboratory apparatus and the cost of labor force increase. On the other hand, the cost of computer simulation decreases due to the improvements of the computer hardware and software technology. Thus more and more researchers focus their interests on the technology of computer simulation.

近年来随着实验仪器、劳动力成本的增加，人们做实验的花费也随之成倍增长，据估计每过十年实验的成本就要翻一番，另一方面，采用计算机来模拟实际体系的成本却随着计算机硬件和软件技术的进步而不断下降，因此分子模拟技术越来越受到相关领域研究人员的关注。

The simulation drilling refers to the process of drilling a well using computer based on the mathematical model.

计算机模拟钻井是在室内根据已建立的工程数学模型，用计算机模拟实现钻井施工全过程的一种仿真技术。

Specialized introduction: This specialized raise has the electronic technology and the information system elementary knowledge, can be engaged in each kind of electronic installation and the information system research, the design, the manufacture, the application and the development higher project technology talented person Main curriculum: The signal and the system, the digital signal processing, the correspondence principle, the microcomputer principle and the connection technology, the monolithic integrated circuit principle and the application technology, the DSP technology and the application, the EDA technology, the construction of data, embedded Linux using the programming, the feeling measure technical, the electric circuit theory series curriculum, the computer technology series curriculum and so on individual hobby * software and hardware research and development computer correspondence literature ping pong photography The experience and the personal experience * 2006.6.29-7.8 compile the staff management system management system using the C language, its basic service activity includes: The staff information warehousing, the revision, the inquiry, the insertion, deletes the staff information and so on * 2006.7.10-7.20 monolithic integrated circuit curriculum design period completes the stopwatch the design, namely the initialization timer is 99:99, 0 starts using the monolithic integrated circuit timer fixed time, fixed time arrives when 0s to transmit the signal to cause the buzzer bell, and may realize suspends, the continuation and the replacement function * 2007.7.2- 7.8 practises in Luoyang Big dragon Peony Communication facility Limited company, does has liquid crystal display monitor telephone one, simultaneously visited has served under somebody's banner the correspondence company, and studied has simulated the telephone the design electric circuit, had understood its basic principle * 2007.7.4- 7.18 completed the DSP curriculum in the school to design, realizes the FIR numeral filter, namely transmitted 25 from DSPThe height level, after advocates AC01 D/A to transform the simulation square-wave, then passes to again from AC01 carries on A/D to transform, produces the data signal, after the DSP numeral filter, finally produces the sine wave * 2008.8.1-8.15 to practise in the Zhejiang Jiang hua abundant power tool limited company, studies the computer software and hardware maintenance.

专业介绍：本专业培养具备电子技术和信息系统的基础知识，能从事各类电子设备和信息系统的研究、设计、制造、应用和开发的高等工程技术人才主要课程：信号与系统、数字信号处理、通信原理、微机原理与接口技术、单片机原理与应用技术、DSP技术及应用、EDA技术、数据结构、嵌入式Linux应用编程、感测技术、电路理论系列课程、计算机技术系列课程等个人爱好＊软硬件研发计算机通信文学乒乓球摄影实践经验及个人经历＊ 2006.6.29-7.8 利用C语言编写员工管理系统，其基本业务活动包括：员工信息入库，修改、查询、插入、删除员工信息等＊ 2006.7.10-7.20 单片机课程设计期间完成秒表的设计，即初始化定时器为99：99，利用单片机定时器0开始定时，定时到0s时发送信号使蜂鸣器响铃，并可实现暂停、继续和复位功能＊ 2007.7.2- 7.8 在洛阳巨龙牡丹通信设备有限公司实习，做有液晶显示屏电话机一部，同时参观了旗下通信公司，并学习了模拟电话的设计电路，懂得了其基本原理＊ 2007.7.4- 7.18 在校完成DSP课程设计，实现FIR数字滤波，即从DSP发送25个高低电平，经主AC01 D/A 转换成模拟方波，然后再传给从AC01进行A/D转换，生成数据信号，经DSP数字滤波，最后生成正弦波＊ 2008.8.1-8.15 在浙江华丰电动工具有限公司实习，学习电脑软硬件维护。

If you are unfortunate enough to the lovelorn, please tell me, I will help you out, really, please contact me!

如果你不幸失恋了，请告诉我，我会帮助你摆脱困境，真的，请联系我啦！

China's plan to cut energy intensity by 20 percent and pollutant discharges by 10 percent between 2006 and 2010 is a case in point.

中国计划在2006年到2010间降低20%的能源强度和减少10%的主要污染物排放，就是一个这样的例子。