工艺

The process of the high energy ball milling,the process of the flan press and the process of the liquid phase sinter was studied. And the influence of those processes to the property of the Mo-Cu alloy was concluded.

本文从工艺上主要研究了Mo-Cu复合粉末的高能球磨工艺、Mo-Cu粉末生坯的压制工艺、液相烧结工艺以及不同的工艺条件对材料性能的影响。

In China,the extracting vanadium from stone-coal on the circs of investigation and the craft status quo were summarized in this thesis,and the traditional craft and the new craft of oxygen pressure acid leaching were contrasted.

综述了我国石煤提钒的研究情况和工艺现状，对目前我国石煤提钒传统工艺和改进工艺进行了分析评述，并介绍了氧压直接酸浸出提钒新工艺，提出了我国石煤提钒工艺应有的发展方向。

Because the sapogenin wastewater is highconsistency organic wastewater,we developed the twophase anaerobic digestion with three stages that acidification phase, inner electrolysis phase and methane phase.

开发了三阶段两相厌氧工艺即酸化、内电解、厌氧产甲烷的工艺处理皂素废水。从理论上分析了该工艺处理黄姜皂素废水的机理和优势。在实验条件相同时，改变内电解在工艺中的位置进行间歇式厌氧处理，测得2种厌氧工艺的处理效果。实验结果表明内电解在两相厌氧中间CODC r的去除率要优于内电解在酸化前

Na2S-leaching process,microbe-leaching process and mechanochemistry directly leaching process were introduced and compared,the result showed that Mo leaching ratio could reach 99% by mechanochemistry directly leaching process for wulfenite,in which process energy consumption was the lowest,and least equipment was needed,the newly developed process was the best way to recover Mo from wulfenite.

硫化钠浸出工艺、生物浸出工艺、机械化学直接浸出工艺三种工艺的比较结果显示，机械化学直接浸出工艺具有能耗低、设备少、钼浸出率高等优点，是处理钼铅矿的最理想的方法，钼的浸出率可达到99%以上。

After comparison of various process, a optimum process—ANIS process can be drawn; A autotrophic denitrifying process is successfully started up and stable operated; ANIS nitrous nitrifying process and autotrophic denitrifying process are joining-up in series to operate, and sound nitrogen removal effect can be achieved.

本论文广泛研究了各类C/N均小于1、甚至低至0.5以下的低、中、高氨氮浓度废水进行亚硝化处理的效果，综合比较了各种不同的处理工艺，得出了最佳工艺——ANIS工艺和运行条件；成功启动并稳定运行了自养反亚硝化系统，并将ANIS亚硝化工艺和自养反亚硝化工艺串连运行，取得了良好的脱氮效果。

How to realizeprocess control of Furan resin-bonded sand self-curing technology has been briefly expounded combining practi- cal production with several sections such as raw material preparation, mixing sand, molding, coremaking,recla- mation and technological equipment design which have been depended upon to work out a series of document of techndogy and technique of furan resin-bonded sand self-curing process operational reules, technology regulations and acceptance standard of raw materials to play important role in guiding production on the spot.

本文结合生产实际情况，从原材料的准备、混砂、造型、制芯以及再生过程和工艺工装设计等几个方面，简要阐述了如何对呋喃树脂自硬砂生产工艺过程进行质量控制，并且在此基础上制订了工艺操作规程和工艺守则以及原材料验收标准等一系列有关树脂自硬砂的工艺技术性文件，对现场生产起了重要的指导作用。

By dilatometric test, Laboratory experiments were...

利用膨胀法在Thermecmastor-Z型热/力模拟试验机上进行实验室实验，测定了研究钢种在不同的中间保温工艺及一定变形工艺条件下的过冷奥氏体连续冷却转变曲线；对每个试样进行了打磨、抛光、腐蚀，在光学显微镜下观察其组织，研究了在不同中间保温工艺下组织的变化情况；利用所建立的CCT曲线研究了一定变形工艺条件及不同保温工艺对其相变行为及组织的影响，对其影响规律进行了分析。

To sum up, the preparation technology of WSCU which coating directly form on the surface of urea granular by polymerization in native solution is a creative technology, the advantages of which are nonusing organic solvent

综上所述，利用原液聚合化学反应在尿素颗粒表面直接成膜制造保水剂包膜尿素肥料的工艺是一项原创新性工艺技术，该包膜工艺具有不用有机溶剂，无污染的优点；保水剂包膜尿素具有较好的工艺性能和生物学效应，该包膜工艺技术和产品具有广阔的开发前景和巨大的农业应用价值。

To sum up, the preparation technology of WSCU which coating directly form on the surface of urea granular by polymerization in native solution is a creative technology, the advantages of which are nonusing organic solvent, and no pollution. The manufactured WSCU behave good technical performance and biological effects, thus this coating technology and WSCU product have broad prospect to industrialization and huge application valuation in agriculture.

综上所述，利用原液聚合化学反应在尿素颗粒表面直接成膜制造保水剂包膜尿素肥料的工艺是一项原创新性工艺技术，该包膜工艺具有不用有机溶剂，无污染的优点；保水剂包膜尿素具有较好的工艺性能和生物学效应，该包膜工艺技术和产品具有广阔的开发前景和巨大的农业应用价值。

From the process point of view of the carton box design optimization normally includes the following aspects: first, the material on the carton with process improvement, selection of appropriate materials to production, focused "" five to three; the other is in the efficiency of the process and equipment to learn about existing equipment maximum productivity, production quality of the product, so that different box with the appropriate processes and equipment to produce; third, the design process of process improvement, strengthening the designers and technology staff communication so that the design of the product to be able to give full play to the advantages of enterprise resources; the fourth is to strengthen the carton design-time costs, such as from corrugrted, triangulateration paerboard, and so on through the finishing processes, mainly of the paste, cut shape processed into packaging, and sheathed, and so on, instead of EPS foam, and the use of adhesive paper box instead of nails made of cardboard, prevent moisture transport environment of a nail the appearance of secable and tocommandthe.

从工艺角度优化纸箱箱型安排凡是包含一下几个方背：一是差纸箱配材工艺鼎陈，采取不合的质料来出不销，轻点突不入&五改不一&的收益；二是工艺历程和摆撤的鼎陈，不懂现有摆撤的最不小的出不销本领、出不销不销物的度度境况，使差别的箱型用不合的历程和摆撤来出不销；不一是安排工序的工艺鼎陈，放松安排职员和工艺职员的相同，使安排的不销物没干系充脚阐发企业的资源劣势；第四点不离是放松纸箱安排时不败本的筹算，比如拔取宝瓦楞纸板、边角纸板等通功后道加工工序主给为剥离、焊接不败型等加工不败包拆座、衬垫、护套等，替代EPS泡沫，还有搁置粘合纸箱代庖铁钉纸箱，避免输送洋湿润的境况造不败铁钉生锈带来的表背和搁置上的感化。

I am sure after a few weeks of adaptation and familiarization I will have no difficulty in functioning on a daily basis in an English speaking society or in participating fully in graduate studies.

在大学的三年的学习生活不仅给予我自身的充实，更重要的是磨练和培养了我较强的自觉能力和严谨，踏实的作风以及不怕困难的精神，对未来充满了信心！

As the first volcanoes erupted, one of the gases that bellowed out was steam.

在第一批火山喷发时，喷出的气体之一就是水蒸汽。