查询词典 thin coating

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

The basic concepts of coatings function, composition, classification. Various coatings: drying oil, rosin and lacquer, alkyd resin and polyester coating, amino resin coating, acrylic acid resin coating, epoxy resin coating, polyurethane coating, elementary organic resin coating. Several new coatings: high solid-constituent coating, water soluble coating, powder coating, light-sensitive coating, anti-corrosion coating, flame-retarded coating, anti-contamination coating, color changing coating, conductive coating and magnetic coating, aeroplane and aerospace dope.

涂料的基本概念：涂料的功能、基本组成、分类；各种涂料的制造及应用：干性油、松香与大漆，醇酸树脂与聚酯涂料，氨基树脂涂料，丙烯酸树脂涂料，环氧树脂涂料，聚氨酯涂料，元素有机树脂涂料；几种新型涂料简介：高固体分涂料，水性涂料，粉末涂料，光敏涂料，防腐蚀涂料，防火涂料，防污涂料，变色涂料，导电涂料和磁性涂料，航空航天特种涂料。

One is low valence vanadium oxide thin films were deposited by direct current facing target magnetron sputtering firstly, and then thermal oxidated; the other is high valence vanadium oxide thin films were deposited by ion beam sputtering, then thermal deoxidated. Vanadium oxide thin films with phase transition were obtained at the lower thermal process temperature 300℃, which is compatible with MEMS technologys. The composition of VO_x thin film fabricated by first method includes mainly VO_2, V2O3 and VO_, the TCR is -2.25%/K, the TCR gradually increases with phase transition temperature decreases. The composition of VO_x thin film fabricated by the second method includes mainly VO_2, V2O5 and V2O3 , and the resulting VO_x thin filmTCR is -3.0%/K. The TCR of phase transition vanadium oxide thin films made by second method is higher than that made by first method for the existance of V2O5 in thin films.

分别采用直流对靶磁控溅射制备低价态氧化钒薄膜再附加热氧化处理的方式，和射频离子束溅射制备高价氧化钒薄膜附加热还原处理的方式获得了具有相变特性的氧化钒薄膜，第一种方式获得相变特性氧化钒薄膜的热处理温度最低为300℃，克服了以往高温条件下热处理不能与MEMS工艺兼容的缺点；相变特性氧化钒薄膜的组分以VO_2为主，含有V2O3和VO_，室温TCR为-2.25%/K；室温电阻温度系数随相变温度的降低逐渐升高；采用第二种方式获得的相变氧化钒薄膜的组分以VO_2为主，含有V2O5和V2O3，室温TCR可达-3.0%/K；分析发现，具有相变特性的氧化钒薄膜中含有V2O5时，室温电阻温度系数明显增大。

The company's main products: color detection instruments: Glossiness Miriam, Miriam color spectrophotometry, standard light source for color light box, transmissioní°Miriam, Miriam orange peel, fresh young tester; surface coating physical properties testing instruments: Coating thickness, wet film thickness, temperature tracker, surface humidity instrument, dewpoint meter, roughness instrument, electric spark pinhole leak detectors; Detect mechanical properties of surface coating equipment: zoned grid, and pencil hardness tester , impact tester, hardness testing sticks, Latvia Law / hydraulic adhesion tester, abrasion tester, cylinder / cone bending tester, cups sudden device, surface tension instruments, scratch pen, indentation hardness tester, etc.; paint coating equipment dedicated category: fineness board, drying time recorder, wet adhesion tester, paint ohmmeter, PH, the coating device, mixer, bead mill, mixer, spray gun, putty detector Miriam, white tester, iron cobalt colorimeter, moisture titrator; viscosity-type equipment: Viscosity Cup, density cup, bubble viscosity tube viscometer, infiltration cup rheometer, viscosity units conversion meter; laboratory standard consumables: Mitsubishi pencil tests, 3M adhesive tape test, RCA tape, rubber, the hiding power test paper for color tubes, microscopes dedicated LED ring light source, transfer ink knife and ink scraper, brush, Color Card, gray cards, zirconia beads, glass beads, pieces of cement mortar, the standard of fly ash, the standard viscosity fluid, stopwatch, chemical industry-standard compilation of manuals, paint paint testing manual; test standard Material: tin plate, steel plate, aluminum sheet, asbestos-cement pressure plate, Eterpan, glass, maple panels, MDF, copper film, polyester film, copper; measuring meter and optical instruments: digital calipers, micrometer, dial gauge a high scale, depth gauge, thickness gauge, diameter gauge, gauge block, magnifiers, microscopes, projectors, video measuring instrument; environmental test equipment: oven, constant temperature and humidity box, hot and cold circulating water bath, salt spray test chamber, high temperature resistance furnace, fluorescent UV aging chamber, xenon lamp aging chamber; electronics equipment: infrared thermometer, multimeter, clamp sheet, thermal imager, temperature and humidity meter; anti-static instruments: static tester, surface resistivity device, flat-panel monitor, anti-static footwear tester, wrist strap tester, body Tester; other types of instruments and equipment: torque tester, temperature and humidity recorder, push pull, the vibrometer, speed instrument, analytical balance, industrial Scale Units, dust particle counter, X-ray fluorescence coating thickness measurement and elemental composition analyzer, and so on.

公司主营产品：外观颜色检测仪器：光泽度仪、分光色差仪、标准光源对色灯箱、透射雾影仪、桔皮仪、鲜映性测试仪；表面涂层物理性能检测仪器：涂层测厚仪、湿膜测厚仪、炉温跟踪仪、表面湿度仪、露点仪、粗糙度仪、电火花针孔检漏仪；表面涂层机械性能检测仪器设备：划格器、铅笔硬度计、冲击试验仪、硬度试验棒、拉脱法/液压式附着力试验仪、耐磨耗试验机、圆柱/圆锥弯曲试验仪、杯突仪、表面张力仪、划痕笔、压痕硬度计等；涂料油漆类专用仪器设备：细度板、干燥时间记录仪、湿附着力耐擦洗试验仪、油漆电阻计、PH计、涂膜器、混合机、珠磨机、搅拌机、喷枪、腻子测定仪仪、白度仪、铁钴比色计、水份滴定仪；粘度类仪器设备：粘度杯、密度杯、气泡粘度管、粘度计、渗透杯、流变仪、粘度单位换算计；实验室标准消耗品：三菱测试铅笔、3M测试胶带、RCA纸带、橡皮条、遮盖力测试纸、对色灯管、显微镜专用LED环型光源、调墨刀、墨铲、狼毫刷、色卡、灰卡、锆珠、玻璃珠、水泥砂浆块、标准粉煤灰、标准粘度液、秒表、化学工业标准汇编手册、涂料油漆测试手册；测试级标准基材：马口铁板、钢板、铝板、石棉水泥加压板、埃特板、玻璃板、枫木面板、中纤板、紫铜片、聚酯膜、铜棒；量具量仪及光学仪器：数显卡尺、千分尺、千分表、高度尺、深度规、厚度规、内径规、量块、放大镜、显微镜、投影仪、影像测量仪；环境测试设备：烘箱、恒温恒湿箱、冷热循环水浴、盐雾试验箱、高温电阻炉、荧光紫外老化试验箱、氙灯老化试验箱；电子类仪器：红外测温仪、万用表、钳形表、热像仪、温湿度仪；防静电仪器：静电测试仪、表面电阻仪、平板监测仪、防静电鞋袜测试仪、手腕带测试仪、人体综合测试仪；其他类仪器设备：扭力测试仪、温湿度记录仪、推拉力计、测振仪、转速仪、分析天平、工业台秤、尘埃粒子计数器、 X-射线荧光涂层测厚和元素成分构成分析仪，等等。

BGB-D Series High Efficiency Coater is mainly used for tablet, pellet, candy to carry out organic film coating, water soluble film coating, slow and control releasing coating, dropping pellet coating, sugar-coating and chocolate, pharmaceutical and foodstuff industry. It is electromechanical integration coating equipment and conforms to the requirement of GMP.

BGB系列高效包衣机主要用于制药及食品工业，是片剂、丸剂、糖果等进行有机薄膜包衣、水溶薄膜包衣、缓、控释性包衣、滴丸包衣、糖衣包衣及巧克力、糖果包衣的一种高效、节能、安全、洁净、符合 GMP 要求的机电一体化的包衣设备。

Precision coating is a very important process in manufacturing of thin films. Among many coating techniques, slot coating may be the most promising in developing high precision coating process due to its versatility and controllability. Fundamentals of slot coating have been studied by many pioneer researchers. However, two topics: use of polymer additives and discrete operation remained relatively largely uninvestigated, especially in terms of their basic mechanisms. These two topics are studied in this thesis using theoretical analysis and experimental methods.

精密涂布技术是未来薄膜技术的重要发展方向，在诸多的涂布技术中，狭缝式涂布是用途广泛且有深厚发展潜力的一项，前人的研究阐明了许多狭缝式涂布的疑难问题，然而，随著精密涂布技术的发展，高分子添加剂与非连续操作逐渐地应用於狭缝式涂布之中，这两个研究课题目前并未发展出适当的理论来说明其机制，本研究以理论与实验的方法对这两个课题进行研究。

The origin、 development and present state of the container ship2. The deformation characters and collapse mode of the container ship3. The basic theory of thin-walled structural mechanics: The bending of the thin-walled beam; The unconstrained torsion of the thin-walled member bar; The constrained torsion of the thin-walled member bar with opening; The constrained of the thin-walled member bar with closed port.4. The calculation of the warp stress in the container ship based on the thin-walled structural mechanics theoryModeling of the hull ladder calculation based on referred mechanics theories of thin-walled member bar, calculation of crankle character of the each section, such as sectional coordinates、 Free twist shear flow、 secondary shear flow、 bend shear flow and so on.

本文主要包括下述六个方面的内容： 1 集装箱船的起源、发展和现状 2 集装箱船变形特征和破坏形式 3 薄壁结构力学的基本理论◇薄壁梁的弯曲；◇薄壁杆件的自由扭转；◇开口薄壁杆件的约束扭转；◇闭口薄壁杆件的约束扭转 4 利用薄壁结构力学理论计算集装箱船的翘曲应力建立船体阶梯计算模型，利用薄壁杆件力学中相关理论，求解各断面单元的弯扭特性，包括：扇性坐标、自由扭转剪流、二次剪流、弯曲剪流等。

We have studied the micro-structures of trumpet shells,actinia,skin and bamboos, and the bionic design principles and methids for integrated coatings, which inclde gradient coating,duplex coating,composite coating,hybrid coating,super lattice coating, were presented by this group.

研究了海螺壳、海葵、荷叶、皮肤与竹等的微结构，提出了整合涂层（包括梯度涂层、二元涂层、复合涂层、混合涂层、超晶涂层）的仿生设计原理和方法。

Field experiment showed that coating agent with uniconazole (No2 uniconazole seed-coating agent) could significantly defend cucumber seedlings agaist damping-off, inhibit vertical growth and strengthen in thickness of young seedlings. It could blossom early, significantly increase fruit numbers per plant and yields of early stage and total yield. After coating cauliflower seeds by No2 uniconazole seed-coating agent, the uniconazole coating did not affect emergence rate, reduced damping-off disease incidence, increased stem diameter and fresh weight of seedling underground parts.

大田栽培试验发现：烯效唑包衣能显著防控黄瓜苗期猝倒病，抑制瓜苗纵向生长和促进幼苗加粗，使植株开花提早，包衣后黄瓜单株结瓜数提高，前期产量和总产量均显著提高；烯效唑包衣花椰菜使其出苗时间略有延长，但对出苗率无明显影响，包衣后的幼苗猝倒病发病率显著降低，叶色明显加深，幼苗茎粗和地下部鲜重显著增加，包衣的植株现蕾期提早，花球单重显著增加且表现出一定的增产效应，但试验的两品种间存在一定的差异。

When the molar fraction of SnO2 is 83%, the main component of the coating isO2 solid solution with rutile structure. When the molar fraction of SnO2 is 44%, the main components of coating are theO2 solid solution with rutile structure andO2 solid solution with fluorite structure. When the molar fraction of SnO2 is 17%, the main component of the coating isO2 solid solution with fluorite structure. Annealed at higher temperature than 450 ℃, CeO2 is found in the coating containing 83%Sn, and there is not SnO2 in the coating containing 83%Ce, which suggests that fluoriteO2 has higher thermal stability than rutileO2. When the molar fraction of SnO2 increases, the dispensability of the coatings is improved greatly.

结果表明：通过控制制备条件可获得具有纳米结构的钛阳极涂层；当Sn的摩尔分数为83%时，涂层主要为金红石相的O2固溶体；当Sn的摩尔分数为44%时，涂层中金红石相O2固溶体和萤石结构的O2固溶体共存；当Sn的摩尔分数为17%时，涂层由萤石结构的O2固溶体组成；高于450 ℃退火时，含83%Sn的涂层中出现CeO2相，而在含83%Ce的涂层中没有出现SnO2相，表明在相同的溶质浓度下，萤石结构的O2固溶体比锡基金红石相O2固溶体具有更好的热稳定性；而涂层中的SnO2具有明显改善涂层分散性的作用。

Some of them were ligated to the plasmid vector pCR 2.1 andsequenced,respectively.

将所获DNA片段克隆到pCR2.1载体进行测序，并与基因组数据库进行同源性比较。

Thinking since Google owns Blogger, I would be able to escalate this issue to the support team.

自谷歌的思考拥有Blogger的，我将能够缓解这一问题的支持团队。