查询词典 serial bond

MAX1999EEI Pinout: 8- to 32-bit and 16- to 32-bit word packing options Programmable wait state options: 2 to 31 CCLK Digital audio interface includes six serial ports, two pre- cision clock generators, an input data port, three programmable timers and a signal routing unit Serial ports provide: Six dual data line serial ports that operate at up to 50 Mbits/s for a 200 MHz core on each data line each has a clock, frame sync, and two data lines that can be configured as either a receiver or transmitter pair Left-justified sample pair and I2S support, programmable direction for up to 24 simultaneous receive or transmit channels using two I2S compatible stereo devices per serial port TDM support for telecommunications interfaces including 128 TDM channel support for telephony interfaces such as H.100/H.110 Up to 12 TDM stream support, each with 128 channels per frame Companding selection on a per channel basis in TDM mode Input data port provides an additional input path to the DSP core configurable as either eight channels of I2S or serial data or as seven channels plus a single 20-bit wide syn- chronous parallel data acquisition port Supports receive audio channel data in I2S, left-justified sample pair, or right-justified mode Signal routing unit provides configurable and flexible connections between all DAI components, six serial ports, an input data port, two precision clock generators, three timers, 10 interrupts, six flag inputs, six flag outputs, and 20 SRU I/O pins Serial peripheral interface Master or slave serial boot through SPI Full-duplex operation Master-slave mode multimaster support Open drain outputs Programmable baud rates, clock polarities, and phases 3 Muxed Flag/IRQ lines 1 Muxed Flag/Timer expired line ROM based security features: JTAG access to memory permitted with a 64-bit key Protected memory regions that can be assigned to limit access under program control to sensitive code PLL has a wide variety of software and hardware multi- plier/divider ratios JTAG background telemetry for enhanced emulation features IEEE 1149.1 JTAG standard test access port and on-chip emulation Dual voltage: 3.3 V I/O, 1.2 V core Available in 136-ball BGA and 144-lead LQFP packages Lead free packages are also available

MAX1999EEI引脚说明： 8 - 32位和16 - 32位字包装选择可编程等待状态的选择：2至31个CCLK数字音频接口包括6个串行端口，两个前643时钟发生器，输入数据端口， 3可编程定时器和一个信号路由单元串行端口提供：六双串口数据线，在高达50 Mbps的操作/为200兆赫的每个数据行每个人都有一个时钟，帧同步的核心秒，和两个数据可以作为任何一个接收器或发射器对左对齐和I2S配对样本的支持下，最多可同时接收或传送24个频道，每使用两个系列的I2S兼容立体声设备配置可编程方向线；港口的TDM通信接口，包括支持128个电话接口的TDM的渠道，如H.100/H.110支持多达12个的TDM流的支持下，每帧128个频道每个压缩扩展每通道的基础上选择在TDM模式输入数据端口提供了一个额外的输入路径的DSP核心配置为I2S或串行数据或7加一个20位宽的SYN -异步的并行数据采集接口通道或8通道；支持接收通道I2S音频数据，左对齐样本对，或右对齐模式信号路由单元组件之间提供所有戴配置和灵活的连接，6个串行端口，一个输入数据端口，两个精密时钟发生器，3个定时器，10个中断，六旗投入，产出6个旗，20曼谷南南区域股的I / O管脚串行外设接口的硕士或奴隶通过SPI串行启动全双工运作主从模式多主机支持开漏输出可编程波特率，时钟极性和第三期合并调制旗/ IRQ线路1合并调制旗/定时器过期线光盘的防伪特征：JTAG的访问与64位受保护的关键允许内存内存可分配给程序访问控制的限制下对敏感地区有一个代码锁相环/遥测分比率为背景的JTAG仿真功能增强的IEEE 1149.1 JTAG标准测试访问端口的软件和硬件多钳各种各样和片上仿真双电压：3.3六/输出，可在1.2 V核心136球BGA封装和144引脚LQFP封装无铅封装，也可

TDA4864 Pinout: 8- to 32-bit and 16- to 32-bit word packing options Programmable wait state options: 2 to 31 CCLK Digital audio interface includes six serial ports, two pre- cision clock generators, an input data port, three programmable timers and a signal routing unit Serial ports provide: Six dual data line serial ports that operate at up to 50 Mbits/s for a 200 MHz core on each data line each has a clock, frame sync, and two data lines that can be configured as either a receiver or transmitter pair Left-justified sample pair and I2S support, programmable direction for up to 24 simultaneous receive or transmit channels using two I2S compatible stereo devices per serial port TDM support for telecommunications interfaces including 128 TDM channel support for telephony interfaces such as H.100/H.110 Up to 12 TDM stream support, each with 128 channels per frame Companding selection on a per channel basis in TDM mode Input data port provides an additional input path to the DSP core configurable as either eight channels of I2S or serial data or as seven channels plus a single 20-bit wide syn- chronous parallel data acquisition port Supports receive audio channel data in I2S, left-justified sample pair, or right-justified mode Signal routing unit provides configurable and flexible connections between all DAI components, six serial ports, an input data port, two precision clock generators, three timers, 10 interrupts, six flag inputs, six flag outputs, and 20 SRU I/O pins Serial peripheral interface Master or slave serial boot through SPI Full-duplex operation Master-slave mode multimaster support Open drain outputs Programmable baud rates, clock polarities, and phases 3 Muxed Flag/IRQ lines 1 Muxed Flag/Timer expired line ROM based security features: JTAG access to memory permitted with a 64-bit key Protected memory regions that can be assigned to limit access under program control to sensitive code PLL has a wide variety of software and hardware multi- plier/divider ratios JTAG background telemetry for enhanced emulation features IEEE 1149.1 JTAG standard test access port and on-chip emulation Dual voltage: 3.3 V I/O, 1.2 V core Available in 136-ball BGA and 144-lead LQFP packages Lead free packages are also available

TDA4864引脚说明： 8 - 32位和16 - 32位字包装选择可编程等待状态的选择：2至31个CCLK数字音频接口包括6个串行端口，两个前643时钟发生器，输入数据端口， 3可编程定时器和一个信号路由单元串行端口提供：六双串口数据线，在高达50 Mbps的操作/为200兆赫的每个数据行每个人都有一个时钟，帧同步的核心秒，和两个数据可以作为任何一个接收器或发射器对左对齐和I2S样本对支持，最多可同时接收或传送24个频道，每使用两个系列的I2S兼容立体声设备配置可编程方向线；港口的TDM通信接口，包括支持128个电话接口的TDM的渠道，如H.100/H.110支持多达12个的TDM流的支持下，每帧128个频道每个压缩扩展每通道的基础上选择在TDM模式输入数据端口提供了一个额外的输入路径的DSP核心配置为I2S或串行数据或7加一个20位宽的SYN -异步的并行数据采集接口通道或8通道；支持接收通道I2S音频数据，左对齐样本对，或右对齐模式信号路由单元组件之间提供所有戴配置和灵活的连接，6个串行端口，一个输入数据端口，两个精密时钟发生器，3个定时器，10个中断，六旗投入，产出6个旗，20曼谷南南区域股的I / O管脚串行外设接口的硕士或奴隶通过SPI串行启动全双工运作主从模式多主机支持开漏输出可编程波特率，时钟极性和第三期合并调制旗/ IRQ线路1合并调制旗/定时器过期线光盘的防伪特征：JTAG的访问与64位受保护的关键允许内存内存可分配给程序访问控制的限制下对敏感地区有一个代码锁相环/分比率背景遥测的JTAG仿真功能增强的IEEE 1149.1 JTAG标准测试访问端口软件和硬件多钳各种各样和片上仿真双电压：3.3六/输出，可在1.2 V核心136球BGA封装和144引脚LQFP封装无铅封装，也可

By this way, it can be seen that the risks of natural disaster and accident can be transferred by construction insurance and that man-caused risks by construction bond. Furthermore, this paper studies the legal problems in the implementation of construction insurance and bond system and the correspondent laws that need to be improved. With reference to construction insurance, it is compulsive to carry out Contractor"s All Risks, Erection All Risks, Employer"s Liability Insurance, Supervisory Engineer/Designer Professional Liability Insurance and Maintenance Insurance. As for construction bond, it is suitable to take the method of surety bond and implement obligatorily Bid Bond, Performance Bond, Employer Payment Bond and Contractor Payment Bond. In addition, this paper analyses the problems in the implementation of construction insurance and bond system in China and presents corresponding solutions. In the end, it provides a method by option price theory to estimate the costs of construction bond.

本文首先借鉴国外工程保险和担保制度，通过工程保险可以有效的转移自然灾害和意外事故风险，通过工程担保转移各种人为风险；其次研究了在我国实行工程保险和担保制度存在的法律问题和需完善的相关法律，提出在工程保险方面，应强制实行建筑工程一切险、安装工程一切险、质量保修保险、设计/监理责任险，在工程担保方面，宜采取保证担保的方式，强制实行投标保证担保、履约保证担保、业主履约保证担保和付款保证担保，分析了在我国实行工程保险和担保制度存在的问题，提出相应对策；最后运用期权价格理论给出了确定工程担保费用的一种方法。

The second section analyzes the restraint conditions of establishing zero-coupon bond yield curve in China. In order to analyze the constraint conditions of establishing zero-coupon bond yield curve, we should firstly study the current situation and problems of Chinese bond market because the data estimating zero-coupon bond yield curve mainly come from bond market which can't be separated from the analysis of the development history of bond market. So the main content of this section includes the development history of bond market, the present problems of Chinese bond market and the restraint conditions of establishing zero-coupon bond yield curve in China.

第二节分析中国零息票债券收益率曲线构造的约束条件，由于估计零息票债券收益率曲线所需要的数据主要来自债券市场，这样，要研究零息票债券收益率曲线构造的约束条件，首先必须研究中国债券市场的现状和问题，而这一切又离不开对中国债券市场发展历史的分析，因此本节的内容包括中国债券市场发展的历史沿革、中国债券市场目前存在的主要问题和中国零息票债券收益率曲线构造的约束条件三个部分。

Third, you must also have serial-interface print cable, use one of these cable to the printer on a serial port on the computer connects directly to a serial port; in General, the print market there is such a professional serial port print cable, print better, you can also use a parallel port cable into a serial cable, but to be, we recommend you to buy a professional serial cable, after all, home-made serial cable cannot guarantee stable printing performance.

第三，手头还务必具有串行接口打印线缆，只用搁置这样的线缆才能不兵打印机上的串行端口与计算机上的串行端口间接拆开起来；凡是来说，打印阛阓上有这样的副业串行口打印线缆采办，对于打印程度较矮的伴侣来说，也可以不兵一条并口线缆改变不败串口线缆，不过为安妥起见，我们倡导大家最坏去采办一条副业的串口线缆，终究克己的串口线缆无法包管安定的打印本能机能。

The results show: the strongest bond is the Al-Al bond in the segregated cell without containing vacancy, where the Al atomic covalence radius is greater than that of Li atom in the cell; while the strongest bond is the Al-Li bond in the segregated cell containing vacancy, and the Al atomic covalence radius in the cell is less than that of Li atom. Since the difference of electronagativity between the Al and Li atoms is obvious, it is inclined to formed the Al-Li segregated cell of short range order structure in the condition of vacancy present. The short range order structure containing vacancy is probably the embryo or precursor structure of the metastable phase δ′(Al3Li). Because the strongest covalent bond in the Al-Li-vacancy segregated cell in alloy formed in quenching is the main strength reason for supersaturated solid solution of alloy. The bond net of succeeding precipitation of δ′(Al3Li) has the picture of anisotropic Al-Al bonding and the bond intensity enhanced. Since the δ′(Al3Li) is coherence with matrix, the bond net strength is enhanced by the precipitation of δ′(Al3Li) and so strengthen the alloy.

计算结果表明：不包含空位的偏聚晶胞的键络最强键为Al—Al键，其中Al原子的共价半径较Li原子的共价半径要大；而含空位的偏聚晶胞的最强键为Al—Li键， Al原子的共价半径要比Li原子的共价半径要小；在空位存在的情况下，由于Al原子与Li原子的电负性相差明显，促使Al和Li原子结合，倾向形成Al-Li短程序结构偏聚区，这种含空位的短程序结构很可能就是δ′(Al3Li)亚稳相的前兆结构和生长胚胎；由于Al-Li-空位有序偏聚晶胞的Al—Li键络比基体键络要强许多，因此，淬火过程中合金生成的Al-Li-空位偏聚晶胞对合金过饱和固溶体起主要强化作用；后续析出的δ′(Al3Li)亚稳相键络各项异性显著，键络强度明显提高；由于Al3Li与基体共格，其大量均匀弥散析出起到提升基体整体键络强度，同样对合金产生强化作用。

The results show: the strongest bond is the Al-Al bond in the segregated cell without containing vacancy, where the Al atomic covalence radius is greater than that of Li atom in the cell; while the strongest bond is the Al-Li bond in the segregated cell containing vacancy, and the Al atomic covalence radius in the cell is less than that of Li atom. Since the difference of electronagativity between the Al and Li atoms is obvious, it is inclined to formed the Al-Li segregated cell of short range order structure in the condition of vacancy present. The short range order structure containing vacancy is probably the embryo or precursor structure of the metastable phase δ'(Al3Li). Because the strongest covalent bond in the Al-Li-vacancy segregated cell in alloy formed in quenching is the main strength reason for supersaturated solid solution of alloy. The bond net of succeeding precipitation of δ'(Al3Li) has the picture of anisotropic Al-Al bonding and the bond intensity enhanced. Since the δ'(Al3Li) is coherence with matrix, the bond net strength is enhanced by the precipitation of δ'(Al3Li) and so strengthen the alloy.

计算结果表明：不包含空位的偏聚晶胞的键络最强键为Al-Al键，其中Al原子的共价半径较Li原子的共价半径要大；而含空位的偏聚晶胞的最强键为Al-Li键，Al原子的共价半径要比Li原子的共价半径要小；在空位存在的情况下，由於Al原子与Li原子的电负性相差明显，促使Al和Li原子结合，倾向形成Al-Li短程序结构偏聚区，这种含空位的短程序结构很可能就是δ'(Al3Li)亚稳相的前兆结构和生长胚胎；由於Al-Li-空位有序偏聚晶胞的Al-Li键络比基体键络要强许多，因此，淬火过程中合金生成的Al-Li-空位偏聚晶胞对合金过饱和固溶体起主要强化作用；后续析出的δ'(Al3Li)亚稳相键络各项异性显著，键络强度明显提高；由於Al3Li与基体共格，其大量均匀弥散析出起到提升基体整体键络强度，同样对合金产生强化作用。

Now our main products are: PTX-LCD, TEX-LCD/S, BLUES30NV serial FM exciters, TX serial 1-10KW FM transmitters, TX serial 3-20KW hot plug-in transmitters, AJ1F serial vertical polarization FM antenna, DPA serial panel FM antenna, star-point or bridge style FM multiplexor, digital STL microwave link, professional receivers and any TV related products.

公司主要产品有：PTX-LCD/S，TEX-LCD/S，BLUES系列调频激励器，TX系列1-10KW调频发射机，TX系列3-20KW热插拔数字调频发射机，AJ1F系列各种功率等级的垂直极化调频天线，DPA系列带反射板偶极子调频天线，星型，桥型系列大功率调频多工器，数字STL微波传输系统，专业调频收转机等及所有电视设备产品

The company devotes to the ambient air government research, the specialized research and development, the production, the sale, the service conform to standard sonsie anoin air cleaner serial productses: The sonsie anoin vehicle plays the part of the serial products, the sonsie anoin clear xin serial products, the sonsie multi-purpose ambient air regulator serial products, the sonsie anoin decoration serial products and the crystal image picture manufacture.

公司致力于环境空气治理的研究，专业研发、生产、销售、服务符合标准的松池负离子空气净化气系列产品：松池负离子车饰系列产品、松池负离子清馨系列产品、松池多功能环境空气调节器系列产品、松池负离子装饰系列产品及水晶图像照片制作。产品具有以下功能

The third part, we analyze the serial verb construction of serial action by putting it into the serial-verb-predicate pattern. According to the classifies of the tense-aspect, and in the terms of transformational generative grammar, we get 37 types, 26 sorts, 222 the serial verb construction of serial action in all. And then we summarize the freedom degree of each type of tense-aspect get into the pre-pattern and post-pattern.

第三部分，把连续动作连动式放入连续动作谓语句中进行考察，依据第二部分时体的分类，再次从转换生成语法出发，共得出了7大类26次类222个连续动作连动式句型，在这一基础之上，总结出各个时体类型进入前动结构和后动结构的自由度。

I want to be a big fish in a small pond.

我要做一条在小池塘里的大鱼。

While the software functioned well, we did not feel the same about their customer support!

虽然该软件运行良好，我们没有同样的感觉他们的客户支持！