查询词典 ozone layer

We found that the microstructures and magnetic properties were not influenced with depositing temperature and sputtering power. The magnetic properties were only affected by Fe layer thickness. When the Fe layer thickness is thinner than 5 nm, weak exchange coupling raised between Fe cap layer and FePt recording layer. When the thickness reached 10 nm, the strongest exchange coupling formed. Film coercivity didn't distinctly vary as Fe layer thickness is thinner than 15 nm. Consequently, we measured DCD curves and had the same conclusions. Indeed, the appearance of exchange coupling is confirmed with 10 nm Fe cap layer.

我们并发现溅镀Fe之温度与瓦数，并不会对结构或是磁性质有显著的影响，Fe厚度的改变虽然也不会改变结构，但是对Cr/Pt/FePt/Fe磁性质却有明显的变化，当Fe厚度薄时(3、5 nm)，在Fe和FePt界面仅有弱的交换耦合力产生，Fe厚度是10 nm时，此时交换耦合力为最强，厚度再增加到15、20 nm时，Hc反而略为上升，同样的我们量测DCD曲线，也证实了Fe厚度10 nm的确有交换耦合力存在。

Microscopic characteristics of cladded crystal fiber are analyzed by X-ray diffraction, Laue X-ray diffraction and scanning electron microscopy, it is found that magnesium-ion indiffusion does not affect the single crystal structure and the domain structure of the magnesium diffused crystal fiber. It is found for the first time that MgO-rich layer in the magnesium diffused LiNbO〓 surface layer exhibits the crystal structure of an unknown compound from the Li-Mg-Nb-O ternary system and MgNb〓O〓. It is proposed for the first time that this unknown compound and MgNb〓O〓 in MgO-rich layer are the real sources of magnesium-ion indiffusion LiNbO〓. Their appearance indicate that MgNb〓O〓 is in the surface layer of MgO-rich layer, the unknown compound is in the subsurface layer and beneath where the MgNb〓O〓 is located, and these compounds have obviously preferred orientation.

通过镁离子内扩散法，首次在国内实现了具有阶跃和抛物折射率分布的c轴LiNbO〓单晶光纤和a轴Nd：MgO：LiNbO〓单晶光纤的芯—包层波导结构，为我国在该项目的研究填补了空白；建立了晶纤损耗的测量系统，提出了利用单模石英光纤作为晶纤入射光耦合器的思想；通过对晶纤损耗的测量，得到了包层晶纤比未包层晶纤损耗降低约14倍的好结果，并实现了低次模传输：对经镁离子内扩散实现包层后的晶纤的微观特性，利用X射线衍射，劳厄照相和扫描电镜表征发现，晶纤并不因镁离子的内扩散而影响其单晶结构和镁的扩散层畴的变化。

The destruction of ozone molecules in the ozone layer by chemical reaction with materials released from human activities, including chlorofluorocarbons and halons.

从人类活动中释放出来的物质（包括氟氯烃和卤代烷哈龙）同臭氧层中的臭氧分子发生化学变化，导致其破坏。

The subsequent global agreement to ban chlorofluorocarbons—the chemicals largely responsible for the thinning of the ozone layer—reversed the growth of the ozone hole and was deemed one of the biggest environmental success stories of the 20th century.

随后的对于禁止氟氯碳（这种化学物质是臭氧层变薄的最主要原因）的全球共识结束了臭氧层空洞的增长，这项共识是20世纪最伟大的环保成功案例之一。

"The United Nations Environment Programme welcomes this effort to raise the bar on energy efficiency", said Rajendra Shende, Head, Ozone Action Branch - UNEP/DTIE,"All companies will want to improve the efficiency of their equipment to save energy costs and to support global commitments to safeguard the climate system by reducing greenhouse gas emissions, improving air quality and protecting the ozone layer".

UNEP/DTIE（联合国环境署巴黎办公室）臭氧层行动部门领导Rajendra Shende说：UNEP非常欢迎这种对于提高能效标准的努力。所有公司都希望提高设备能效来减少能耗，并希望支持全球各国通过减少温室气体排放、改善空气品质及保护臭氧层行动来保护地球气候系统。

An area of the ozone layer that is seasonally depleted of ozone .

季节性地消耗臭氧的臭氧层的一个区域。

However be close to 20 years of science research and atmosphereses to prognosticate to discover:Annually spring South Pole ozone layer within atmosphere always at become thin, in fact exist an ozone" hole" in very atmosphere

然而近二十年的科学研究和大气观测发现：每年春季南极大气中的臭氧层一直在变薄，事实上在极地大气中存在一个臭氧&洞&

In addition, some modifications on several computational methods are also presented. Using LMTO method the electronic structure of several systems are studied, and some results are obtained. They are: The ideal Nb (100) surface has three surface states, the multi-layer relaxed surface has two surface states. The surface energy of the ideal surface is higher than that of the relaxed surface, that means that the multi-layer relaxed surface is more stable than the former one, which supports the LEED results. The mono-layer relaxed Ag (111) surface is the most stable one among several" stable surface models"presented by several researchers. The surface energy of Ag (111) surface is higher than that of surface Ag (001), which supports some experimental results such as different reaction rate at different surface orientations for the same material. The surafce states of Si (111) surface not only locate near the Fermi level, but also in the valence band, which agrees well with Cohen's conclusion. Si (111)-H is an effective model for analysing the surface states and H adsorbed on the back surface is a good method for improving the convincingness of the results obtained on thinner slab models. The surface stability depends on three different kinds of MoSi〓(001) surfaces, the surface with mono-layer Si is the most stable one, and the surface with Mo at the first layer is the most unstable one among them. These are consistant with the Kemoda's experimental results. The valence bands of clean or K adsorbed CdTe (111) surface agrees well with the synchrotron radiation studies. The surface of CdTe (111) consists of four kinds of surface models which show different surface electronic structures and different surface structure stabilities. The conclusion agrees well with Wu's experimental work. The different absorbed alkali metals on the CdTe (111) surface give different adsorption characteristics which have relations not only with the valence electrons, but also with the core ones of the alkali metals. The electonic structures of Si-C alloys are different from that of Si-Ge alloys, and the energy band gaps of Si-C alloys do not increase linearly with Carbon concentration, our conclusion supports Alexander's results, but conflicts with Soref's one.

现分述如下： LMTO方法及其应用方面：1）通过对Nb（100）表面电子态分析发现清洁理想表面有三个表面态，多层弛豫表面有两个表面态；表面能大小说明多层弛豫表面更稳定，支持了LEED结果。2）通过对采用不同方法获得的几种不同Ag（111）表面稳定结构的表面能计算分析，给出了单层弛豫表面为Ag（111）表面的最稳定结构；从Ag（111）单层弛豫表面和Ag（001）表面的表面能比较，发现了Ag（001）表面表面能要比Ag（111）小的，表明了同种物质不同表面取向将表现出不同物理、化学性质，这是与实验中得出的结论是吻合的，3）通过对Si（111）表面态分析，不仅发现了Si（111）表面不仅具有居于费米能级附近的悬挂键所对应的表面态，而且还有很多表面态位于价带能量范围内，与Cohen等结果一致，H饱和slab模型背表面相当于增加了slab层的厚度，是一有效的变相增加slab层厚的方法，弛豫表面较清洁理想表面价带谱们低能端的少许移动，预示着总能降低，说明弛豫表面较清洁理想表面稳定。4）MoSi〓具有三种表面，从费米能级上态密度值大小得到单层Si表面最稳定，Mo原子为表层原子的表面最不稳定，双层Si原子表面居中的结论，这与Kemoda等人实验结果是一致的。5）通过对CdTe（111）表面表面电子态、表面结构稳定性及表面H、碱金属吸附的电子结构系列研究，不仅得出了CdTe（111）清洁及碱金属K吸附价带谱与同步辐射光电子谱相吻合的结果，而且发现了CdTe（111）表面具有四类不同原子近邻特征，表现出四类不同的表面结构及电子结构特征：不同表面态分布、不同的表面结构稳定性（表层原子与次层原子成三键有一悬挂键的表面要比表层原子与次层原子成一键有三悬挂键稳定（与Wu等人实验结果一致））、不同的H吸附特性。

The main results of the investigation are as following:(1) Some important criteria for the design of multi-layer structure are acquired: the ratio of the layer thickness to the contact diameter should be controlled to a value about 0.8; increasing the number of the gradient layers and elasticity modulus of the top layer would benefit to the yield strength and the stress status at the interface.（2）By means of molecular dynamics simulations for a indentation and sliding process, it is discovered that dislocations of 45 direction to the surface occur in the surfaces layer, which is correspond to the direction of the plastic flows observed in the macroscopic continuous medium. The irreversible deformation caused by the dislocation and the atom piles at the surface are responsible for the irreversibility of the force response. They are also the main factors for the friction generation. The temperature and the indentation velocity have significant effects on the deformation behaviors of the material of the surface layer. The yield strength would increase obviously if the indentation velocity is greater than 10 m/s.（3）A method to evaluate the fracture toughness of coating by estimating the crack-density functionβof a Wicker''s indentation was proposed. Meanwhile a new surface treatment technology was developed using non-equilibrium plasma.（4）A MD-FE hybrid method and corresponding software was developed to analysis the tribological behaviors for multiplayer system.

研究主要内容和结果有：（1）得到指导梯度膜设计的几个准则：控制膜层厚度与接触半径比在0.8左右为宜；适当增加梯度层层数和顶层弹性模量，有利于提高抗屈服能力和改善界面处的应力状态；（2）通过对嵌入和滑动摩擦过程的分子动力学模拟，发现表层产生一个与宏观连续介质的塑性流动方向观测一致的45 方向位错；位错造成的不可逆变形和表面的原子堆积，是力的响应不可逆性的原因，也是构成摩擦力的主要因素；温度和嵌入速度对材料变形特性有显著的影响，当嵌入速度大于10 m/s时，屈服强度明显增加；（3）提出压痕裂纹密度系数β半定量判定膜层断裂韧性的方法；并开发出表面强化新工艺；（4）开发出分析表面摩擦学特性的MD-FE复合模拟方法和相应模拟软件。

He also suggested the five layers of neurosis that could block individual growth, which were phony layer, phobic layer, impasse layer, implosive layer and explosive layer.

皮尔斯人格思想和理论的贡献主要表现在：首先，它促进了现代人格理论的发展；其次，它促进了存在心理学在美国的发展；再次，皮尔斯以此为基础创建了独特的格式塔疗法。

It has to be computed by the host for the actual clock rate.

主控制器可以用来计算实际的时钟速率。

Let's see what you got.

让我看看你的东西