查询词典 original data

TDA4864 Pinout: 8- to 32-bit and 16- to 32-bit word packing options Programmable wait state options: 2 to 31 CCLK Digital audio interface includes six serial ports, two pre- cision clock generators, an input data port, three programmable timers and a signal routing unit Serial ports provide: Six dual data line serial ports that operate at up to 50 Mbits/s for a 200 MHz core on each data line each has a clock, frame sync, and two data lines that can be configured as either a receiver or transmitter pair Left-justified sample pair and I2S support, programmable direction for up to 24 simultaneous receive or transmit channels using two I2S compatible stereo devices per serial port TDM support for telecommunications interfaces including 128 TDM channel support for telephony interfaces such as H.100/H.110 Up to 12 TDM stream support, each with 128 channels per frame Companding selection on a per channel basis in TDM mode Input data port provides an additional input path to the DSP core configurable as either eight channels of I2S or serial data or as seven channels plus a single 20-bit wide syn- chronous parallel data acquisition port Supports receive audio channel data in I2S, left-justified sample pair, or right-justified mode Signal routing unit provides configurable and flexible connections between all DAI components, six serial ports, an input data port, two precision clock generators, three timers, 10 interrupts, six flag inputs, six flag outputs, and 20 SRU I/O pins Serial peripheral interface Master or slave serial boot through SPI Full-duplex operation Master-slave mode multimaster support Open drain outputs Programmable baud rates, clock polarities, and phases 3 Muxed Flag/IRQ lines 1 Muxed Flag/Timer expired line ROM based security features: JTAG access to memory permitted with a 64-bit key Protected memory regions that can be assigned to limit access under program control to sensitive code PLL has a wide variety of software and hardware multi- plier/divider ratios JTAG background telemetry for enhanced emulation features IEEE 1149.1 JTAG standard test access port and on-chip emulation Dual voltage: 3.3 V I/O, 1.2 V core Available in 136-ball BGA and 144-lead LQFP packages Lead free packages are also available

TDA4864引脚说明： 8 - 32位和16 - 32位字包装选择可编程等待状态的选择：2至31个CCLK数字音频接口包括6个串行端口，两个前643时钟发生器，输入数据端口， 3可编程定时器和一个信号路由单元串行端口提供：六双串口数据线，在高达50 Mbps的操作/为200兆赫的每个数据行每个人都有一个时钟，帧同步的核心秒，和两个数据可以作为任何一个接收器或发射器对左对齐和I2S样本对支持，最多可同时接收或传送24个频道，每使用两个系列的I2S兼容立体声设备配置可编程方向线；港口的TDM通信接口，包括支持128个电话接口的TDM的渠道，如H.100/H.110支持多达12个的TDM流的支持下，每帧128个频道每个压缩扩展每通道的基础上选择在TDM模式输入数据端口提供了一个额外的输入路径的DSP核心配置为I2S或串行数据或7加一个20位宽的SYN -异步的并行数据采集接口通道或8通道；支持接收通道I2S音频数据，左对齐样本对，或右对齐模式信号路由单元组件之间提供所有戴配置和灵活的连接，6个串行端口，一个输入数据端口，两个精密时钟发生器，3个定时器，10个中断，六旗投入，产出6个旗，20曼谷南南区域股的I / O管脚串行外设接口的硕士或奴隶通过SPI串行启动全双工运作主从模式多主机支持开漏输出可编程波特率，时钟极性和第三期合并调制旗/ IRQ线路1合并调制旗/定时器过期线光盘的防伪特征：JTAG的访问与64位受保护的关键允许内存内存可分配给程序访问控制的限制下对敏感地区有一个代码锁相环/分比率背景遥测的JTAG仿真功能增强的IEEE 1149.1 JTAG标准测试访问端口软件和硬件多钳各种各样和片上仿真双电压：3.3六/输出，可在1.2 V核心136球BGA封装和144引脚LQFP封装无铅封装，也可

The representative minority cultural relic-pottery relic of Buyi minority and the two wooden masks is taken as the research object. Firstly, Hiscanner laser scan detector was adapted for data collection, and then obtain point cloud data which could be recorded on disc for permanent saving was obtianed; Furthermore, the new popular reverse engineering software Geomagic for some disposals of point cloud data was adopted in data condensing, data mending, data filtering, feature line picking up to obtain NURBS surfaces; and then the error between the reconstructed CAD model and the point cloud data was evaluated to guarantee the precision of surface reconstruction to keep the relics keep its original appearance. In the end, the NURBS surfaces are imported to 3D software Solidworks and entities of CAD are generated by surface sewing, mold loft and ablating and other instructions.

选用有代表性的贵州少数民族文物―布依族酒壶、水壶以及木制傩戏面具作为研究对象，采用Hiscanner激光扫描测头对其进行数据采集，扫描得到的点云数据可刻录到光盘上作为文物数据永久保存；更进一步地，采用目前流行的逆向工程软件Geomagic studio对点云数据进行数据精简、数据滤波、数据修补、提取特征线等处理后得到NURBS曲面；为保证曲面模型重建的精度，在曲面重建模型后对其误差评价，通过控制误差的方式指导曲面模型重建，使重建的文物曲面模型能真实完整地反映原状；最后，在功能强大的三维造型软件Solidworks中导人重构的NURBS曲面进行曲面缝合、放样等，将其生成实体CAD模型，并对模型的局部特征进行适当的再设计以实现文物实体模型的优化。

Network information processing transfers the majority of processing and computing works into WSN based on original data collection. A mass of incomprehensible original data is extracted and inferred into meaningful and consultable data to some certain users. Meanwhile, by network information processing, the data transmission account and latency are decreased; the energy efficiency and data accuracy are increased.

传感器网络的网内信息处理技术在原始采集数据的基础上，将大量的信息处理和计算移植到传感网内部进行，从海量的、杂乱无章的、难以理解的原始数据中抽取并推导出对于某些特定的用户来说具有特定意义和判决参考价值的数据。

The principles are as follows:①preliminary interpretation is carried out on crosswell seismic data in depth domain to establish an accurate velocity model;②sinc interpolating function is used in depth-time conversion to realize waveform fidelity;③the recognition of surface seismic data is utilized to ascertain the reflection characteristics of crosswell seismic data in time domain;④ good spatial continuity of surface seismic data is adopted to retrieve the "hopper" defect in crosswell seismic profiles and the deficiency of lateral contrast between crosswell seismic data;⑤in fine calibration of well-side traces of crosswells and surface seismic data, coincident time-depth relation is used to match two seismic data so as to make the calibration more reasonable;⑥in multi-crosswell seismic data inversion by sparse spike inversion method, lateral restraints are strengthened to ensure the continuity of inversed wave impedance profile.

实现反演的基本原理是：对深度域井间地震资料进行初步解释；建立精确的速度模型；在对井间地震剖面进行深时转换时采用sinc插值函数实现波形保真；利用对地面地震资料的认识来落实时间域井间地震资料的反射特征；利用地面地震资料良好的空间连续性弥补井间地震剖面的"漏斗"缺陷和井间资料之间横向对比性的不足；在井间地震和地面地震井旁道精细标定中，通过一致的时深关系来实现两种地震资料之间的匹配，使井旁道的标定更加合理；在利用稀疏脉冲反演方法进行连井井间地震资料反演时，通过增强横向约束保证反演波阻抗剖面的连续性。

In order to be able to transmit a variable volume of data, particularly in a single coherent data block, between message transmission planes of telecommunications interfaces of a hybrid telecommunications system with minimal effort within the message transmission planes, if the variable data volume exceeds the maximum data volume which can be transmitted between the same message transmission planes of the telecommunications interfaces, then a data element specific to the transmission layer is used as a function of the varying data volume at least twice in succession for the transmission of the data volume in the data block.

要約 为在混合通信系统中能各自以最小的传输工作量在各通信传输层面中传输混合通信系统各通信接口的通信传输层面之间的一个变化的数据量，尤其当此变化的数据量超过在各通信接口的相同通信传输层面之间最大可传输的数据量时仍能在一个单一的互相关联的数据块中传输此变化的数据量，取决于此变化的数据量至少两次依次地对在数据块中的数据量的传输采用一种传输层面专门的信息元素。

An information recording disc having a burst cutting area (102) for recording control information for a reproducing apparatus by removing a reflective layer of the disc in a striped shape and a data recording area (104) for recording user data, wherein the burst cutting area (102) includes at least one BCA control information area and the BCA control information area comprises: an application identifier area (106) for identifying applications of control data; a data length area (108) for indicating data length of the control data; and an application specific data area (109) for recording the control data.

一种信息记录盘，具有突发分割区域（102），通过除去条带形的盘的反射层和数据记录区域（104），用于记录再现装置的控制信息，其中，突发分割区域（102）至少包括一个BCA控制信息区域，BCA控制信息区域包括：识别控制数据的应用程序的应用程序识别符区域（106）；指示控制数据的数据长度的数据长度区域（108）；记录控制数据的应用程序特殊数据区域（109）。

The digital signature is some data that attachment on data units, perhaps password transformation which does to the data unit, this kind of data or the transformation permission data unit receive with by confirmed the data unit the origin and the data unit integrity and the protection data, prevented is carried on by the human fabricates.

数字签名[5]是附加在数据单元上的一些数据，或是对数据单元所作的密码变换，这种数据或变换允许数据单元的接收者用以确认数据单元的来源和数据单元的完整性并保护数据，防止被人进行伪造。

Communication;Communication systems;Communication technology;Components;Data;Data description;Data management;Data processing;Data processing system;Data records;Data representation;Data transfer;Definition;Definitions;Earth's surface;Encoding;Geodesy;Geographic information;Geographical;Geography;Geology;Geomatics;Geotechnics;Information;Information exchange;Information processing;Information technology;Metadata;Metafile;Quality;Quality assurance;Schemes;Specification;Topology

中文标题地质信息。数据描述。元数据中文主题词大地测量学；数据描述；编码；数据；传播学；传播技术；数据管理；数据处理；数据表示；地理学；元部件；通信系统；元数据；数据记录；信息处理；数据传送；拓扑学；地质学；大地构造学；数据处理系统；图表；定义；规范；地质信息；地球表面；地质信息管理；元文件；信息交流；地质的；信息；信息技术

He was only to happy to help out with the display shoes and shipped over a boxed pair of original metallic Jordan I's along with original Fire Red V's, original Carmine VI's, original Powder Blue IX's and original Chicago X's.

他也是唯一乐意帮助这次展览的人，他邮寄过来一箱鞋子，包括一双原版金属色的乔1，原版火红色的乔5，原版深红色的乔6，原文粉蓝色的乔9，以及在芝加哥推出的原版乔10。

They (1) describe the same thitlgs, behaviors or conditions opposite or contrary to the spatial direction as the original characters describe;(2) describe the images reverse to which the original characters describe;(3) give meanings completely opposite to those of original characters;(4) are used to distinguish similar but different things with the original characters;(5) give new meanings which are spread out from those of original characters;(6) expand more abstract meanings.

其意义大致有以下几种类型：（1描绘与原字所指事物、行为或状态在空间方向上呈相反或相背关系的同类事物、行为或状态；(2)与原字分别描绘同一事物的正反两面形象；(3)新字义是对原字义的完全否定；(4)新字与原字用以区别形象相似的两种不同事物；新字的意义由原字意义顺衍而来；(6)引申出较为抽象的含义。

Objective:To compare the response control and attention of Schizophrenic patients with that of the healthy controls by Integrated Visual and Auditorycontinuous performance test. To quantitate the impairment of cognitive function in patients, and to explore the relationship between cognitive function and the severity of the disorder.

目的：探讨精神分裂症病人在IVA持续操作测试中的反应控制能力、注意力等，并与健康人进行比较，从而量化精神分裂症病人的认知功能损害，并进一步探讨其认知功能与疾病严重程度的关系。

Main effective factors including subcooling degree, mechanical vibration, gas hydrate reformation, environment temperature, noncondensing gas and surfactant are analyzed.

指出过冷度、机械振动、重复生成水合物、环境温度、不凝性气体、添加剂是影响气体水合物生成的主要因素，还对R152a水合物的放冷进行了实验研究。