查询词典 metal-pointed

We mainly produce and welded wire mesh, export expanded metal mesh ,stainless steel woven wire mesh, perforated metal sheet , hexagonal wire mesh ,barbed wire ,insect screening, galvanized square woven wire mesh, hexagonal wire netting or chicken netting, fencing wire mesh , black wire cloth and other metal mesh including crimped wire mesh, conveyor belt net, mine sieving mesh , barbecue wire mesh and metal wire series products such as galvanized iron wire, black iron wire, stainless steel wire and PVC coated wire.

我厂主要生产电焊网、钢板网、冲孔网、不锈钢丝网、黑丝布、刺绳、窗纱、六角网、护栏网、输送带网、烧烤网、矿筛网等丝网、筛网产品，以及镀锌丝、黑铁丝、PVC丝、不锈钢丝等丝产品。广泛用于石油、化工、粮食、食品、医药、建筑等各行各业。其产品广泛销往全国各地，并出口到了东南亚等国家和地区。

The flow of molten metal are the forefront of the lost foam pyrolysis products, it will happen with the liquid metal reflect and affect the quality of metal liquid, if the liquid metal filling process in pyrolysis products should not rule out smoothly, it is easy to cause stomatal , Cockle, by defects such as carbon.

金属液的流动前沿是热解的消失模产物，它会与金属液发生反映并影响到金属液质量，如果金属液充型过程中热解产物不能顺利排除，就容易引起气孔、皱皮、增碳等缺陷。

Faraday's law is that when the flux in the conductor loop changes, it produces electromotive force in the conductor loop, and obeys to contour integral law , Maxwell Curl Theory is that when the magnetic intensity of a certain point in ether space changes, there produces electric field at that point in ether space, which is the field mutual production theory of "electric field produces magnetic field and magnetic field produces electric field" in the free space which everybody is familiar with, and it obeys differential law , Lorentz magnetic force is that when metal electrons cut magnetic lines, metal electrons forced by move along the conductor to form inductive current, in fact, it doesn't matter whether coil moves or magnet moves, only if there exists relative motion between magnetic field and conductor, metal electrons must cut magnetic lines, which is,"coil stills while magnet moves to the left" and "magnet stills while coil moves to the right" these two situations are the same, which both belong to metal electrons having cut magnetic lines.

法拉第定律指导体环路里的磁通量发生变化时，在导体环路上产生电动势，而且服从围线积分律；麦克斯韦旋度理论指以太空间某点的磁场强度发生变化时，在以太空间的该点产生电场，即大家熟知的自由空间里"电场生磁场与磁场生电场"之互生场理论，而且服从微分律；洛伦兹磁力指金属电子切割磁力线时，金属电子受力沿着导体漂移而形成感应电流，其实，无论线圈运动或是磁铁运动，只要磁场与导体存在相对运动，则金属电子必然切割磁力线，即，"线圈静止而磁铁向左运动"与"磁铁静止而线圈向右运动"这两种情况是一样的，都属于金属电子切割了磁力线。

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene PolymerizationFacile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that:1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明：1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体；2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene Polymerization Facile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that: 1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明： 1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体； 2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

First of all, this study will be multi-walled carbon nanotubes by chemical oxidation process purified so it can be modified to deal with than the purification of purity before the modified 5 wt%, more than 1.89 times the surface area to increase the surface potential decrease of about 10 ~ 20 mV and the surface functional base (-COOH and-OH) to increase 1.45 times, and then the control technology of electroless preparation parameters include: analysis of plating time, plating analysis of temperature, metal ions in solution than the (Fe2+/ Ni2+), bath pH and the added value of dispersion Agent and other research towards Fe-Ni particles to increase the iron content and Fe-Ni particles spread in the MWCNT upper fixed targets,the results found that when the parameters for the preparation of 50 ℃, pH10, do not add dispersant, metal ions than the solution (Fe2 +/ Ni2 +) 7, the highest iron content can be Fe = 40.55 at%(flat iron content 111.17 mg / g) of nanocomposites Fe-Ni/CNT, then for a series of the nature of its analysis, the final evaluation Fe-Ni/CNT nanocomposites were processed on the effectiveness of the application of mixed pollutants, the results showed that in 120 minutes at the same time when Adsorption of heavy metal ions lead nitrate 10 ppm, selenium heavy metal ion degradation of 1 ppm and orange azo dye AO7 50 ppm standard of effluents, and after a total Fe-Ni nano-particles to SEM / EDS analysis of more than 50% still remaining.

本研究首先将多壁奈米碳管以化学氧化法做纯化改质处理能使其纯度较纯化改质前提高5 wt％、比表面积提高1.89倍、表面电位下降约10~20 mV以及表面官能基提高1.45倍，再控制无电镀技术之制备参数包括：析镀时间、析镀温度，镀液中金属离子比(Fe2+/Ni2+)、镀液pH值及是否添加分散剂等，研究朝提高Fe-Ni粒子的含铁量与Fe-Ni粒子散布固定在MWCNT上等目标进行，研究结果发现当制备参数为50 ℃、pH10、不添加分散剂、镀液金属离子比(Fe2+/Ni2+)7时，可得到最高铁含量Fe = 40.55 at％(单位铁含量111.17 mg/g)之奈米复合材料Fe-Ni/CNT，接著对其作一系列性质分析，最后评估奈米复合材料Fe-Ni/CNT对共处理混合污染物之应用效益，结果显示其在120分钟时能够同时吸附重金属硝酸铅离子10 ppm、重金属硒酸根离子1 ppm及降解偶氮橘色染料AO7 50 ppm达放流水标准，且共处理后奈米Fe-Ni粒子以SEM/EDS分析仍剩余50 %以上。

The album title Battle Metal has given rise to the term "battle metal" being used as a description of folk metal (used mainly by Metal Hammer magazine and its readers) but it is not a canonical metal subgenre.

该专辑的标题战役金属引起一词的&战斗金属&被作为一种民间金属描述使用（使用金属锤杂志，其读者主要是），但它不是一个规范的金属体裁。

Environmental protection and sustainable development in agriculture has become key problems of human being in nowadays,and the heavy metal contaminates is one of severe pollutive originations,which enters the human body by food chain and endangers the health of human being. In this paper,the origination of heavy metal in soil was conducted and the review about the methods of heavy metal spacial variation in soil was discussed. The proposed implications were as follow:① the study on spacial variation of the heavy metal should be conducted by Geostatistical methods combinated with 3S technic;②a model about the geostatistics and the spacial variation of heavy metal was built.

环境保护及农业可持续发展成为当今世界人类面临的重要课题，重金属污染尤为突出，并通过食物链进入人体，对人体健康构成极大危害；本文简要分析了土壤重金属的来源，并对土壤重金属特性空间变异定量研究中所涉及的主要分析方法作了初步介绍；提出了重金属特性空间变异定量研究方法的两点启示：①地统计学与3S技术的结合来研究重金属空间变异；②提出了地统计学与土壤重金属空间变异分布建模。

The manufacturing method comprises the following steps: a wire-coiling machine is used to vertically and evenly wind the metal narrowbands outside the metal capillary according to the actual need; then the regular welding method is adopted to weld the metal narrowbands wound outside the metal capillary on the outer surface of the metal capillary.

其制造方法包括以下步骤，采用绕丝机将金属窄带按实际需要竖立均匀绕制在金属毛细管外侧；之后再采用常规焊接方法将绕制在金属毛细管外侧的金属窄带均焊接在金属毛细管的外表面上。

A process for making an electronic device which comprises applying a nonaqueous plate-resistant ink by ink jet printing to selected areas of a dielectric substrate, optionally laminated with an electrically conductive metal, exposing the plate resistant ink to actinic and/or particle beam radiation to effect polymerisation, adding one or more metal layers by electrolytic or electroless deposition, the upper layer of which is an etchresistant metal, removing the polymerised plate-resistant ink with alkali and finally removing the electrically conductive metal which are optionally directly laminated to the dielectric substrate and not protected by an upper layer of etch-resistant metal by chemical etching wherein the plate-resistant ink is substantially solvent-free and comprises: A 30 to 90 parts acrylate functional monomers free from acid groups comprising mono- or higher functionality wherein 5 to 95% by weight are mono-functional monomers; B 1 to 30 parts acrylate functional monomer containing one or more acid groups; C 0 to 20 parts polymer or prepolymer; D 0 to 20 parts radical initiator; E 0 to 5 parts colorant; F 0 to 5 parts surfactant; and where the ink has a viscosity of not greater than 30 cPs at 40 DEG C and all parts are by weight.

一种制备电子装置的方法，所述方法包括以下步骤：通过喷墨印刷在任选层压了一种或多种导电金属的介电底材的选定区域涂覆非水的阻沉积油墨，将所述阻沉积油墨暴露在光化辐射和/或微粒束辐射中以完成聚合，通过电解沉积或无电沉积增加一层或多层金属层，其中最上层的金属层为一种或多种阻蚀刻金属，用碱除去聚合的阻沉积油墨，最后通过化学蚀刻将任选直接层压在所述介电底材上并且不被一种或多种阻蚀刻金属的上层保护的导电金属除去，其中所述阻沉积油墨基本不含溶剂，并且包含以下组分：A30-90份不含酸基团的丙烯酸酯功能性单体，所述单体包括单官能或多官能单体，其中5-95％重量为单官能单体；B1-30份包含一个或多个酸基团的丙烯酸酯功能性单体；C0-20份聚合物或预聚物；D0-20份自由基引发剂；E0-5份着色剂；和F0-5份表面活性剂；其中所述油墨的粘度在40℃下不高于30cPs，并且所有的份数以重量计。

The big eared hedgehog, the little owl, the sand gecko, the three-toed jerboa, and every show needs a villain - saw-scale - the viper!

大耳刺猬，小猫头鹰，沙壁虎，三趾跳鼠，每场戏都需要反派角色：蝰蛇。

Plasmodiophora brassicae ; resting spores ; density gradient centrifugation of sucrose ; ultrasonic disruption

根肿；休眠孢子；蔗糖密度梯度离心；超声波破碎