查询词典 frictional

The power required during a turn can be expressed by [6.6] where V is the speed of the center of gravity of the vehicle during a turn, is the frictional torque of the brake in the steering system, and is the relative angular velocity of the frictional elements in the brack.

所需功率在一转，可以表达[ 6.6 ] 如果v是速度，质心的车辆在转弯，是摩擦力矩制动，在助力转向系统，是相对角速度的摩擦因素在brack 。

One of the two shoes is the leading shoe, i.e. the frictional forces between the brake lining and the brake drum act to support the application force, whereas the frictional forces in the case of the trailing shoe act to oppose the tensioning force.

这两个鞋是领先的鞋，即摩擦力量之间的刹车片和制动鼓的行为，以支持应用武力，而摩擦力量的情况下尾随鞋采取行动，反对张紧力。

Characteristics of free vibration and forced vibration of a damped system with dry frictional damping,viscous damping and c x·2 damping are analyzed and calculated,acceleration response of free-vibration of the dry frictional damped system has a sudden change when x· is zero,the change value is constant and depends only on the natural frequency ωn and the displacement xk due to dry friction.

本文对存在干摩擦阻尼、粘性阻尼和c.x2阻尼系统的自由振动及受迫振动特性进行了解析及数值计算，得到干摩擦阻尼系统自由振动的加速度响应在速度零点有一突变，这一变化量为定值，且只与系统固有频率ωn及摩擦当量位移xk有关。

At present, although finite element methods is a kind of effective measures in analyzing metal plastically forming problems with friction, dynamic friction in the process of metal forming is substituted with static friction and constant frictional force as one of independent constraint conditions is transposed to equivalent node-load or FEM unit is divided into contact unit and inner unit in numerous studys and applications, so that it result in relative bad accuracy and awkward operation. These defects mostly attribute to the fact that FEM bases on the variational equality principles, however frictional constraint will actually result in variational inequality energy functional.

目前，应用于分析金属塑性成形的有限元法是一种有效的处理摩擦效应的定量计算方法，但是许多应用和研究是用常摩擦来代替金属塑性成形过程中的动态摩擦；把常摩擦力作为单独的约束条件移置到等效结点载荷上或把有限元单元划分成接触单元和内单元，这些将导致解的精度相对不高及实际操作不方便等一系列问题，产生这些不足的重要原因之一在于它的理论基础是变分等式原理。

In the analysis, firstly, the flux boundary condition is used to simulate the frictional heat resource between wheel and rail. The non-steady heat transfer between the contacting surfaces of the wheel/rail, heat-convection and radiation between the wheel/rail and the ambient were all taken into consideration. Therefore, a heat coupling model of the wheel/rail in rolling/sliding is put forward to calculate the frictional temperature rise in the wheel and rail. Secondly, after the temperature distribution of wheel/rail, due to friction, is calculated, substitute the thermal load with equivalent fictitious body force and boundary distributed force loaded on the nodes of the corresponding elements. The wheel-load is applied to the center of the wheel.

首先，用热流边界条件模拟轮轨接触界面的摩擦热源，考虑轮轨间的非稳态热传导、轮轨自由表面与环境的热对流、热辐射的影响，建立轮轨滚动接触热耦合有限元计算模型，分析计算轮轨滚、滑工况下的摩擦温升；其次，以求得的轮轨温度场结果作为求解轮轨应力场的已知条件，轮载以集中力形式直接加载于轮心处，将摩擦温升引起的热载荷等效为假想体力和热边界面力，施加于相应的单元节点上，建立了轮轨热—机械载荷耦合作用的热弹性平面应力模型，分析热—机械载荷作用下的轮轨应力场。

The improvement of the frictional resistance is mainly due to the effect of carbon on residual austenite and the morphology of carbides, and an appropriate amount of residual austenite is helpful to improve the impact toughness and hardness of matrix; The spherical VC can hinder the initiation and propagation of crack and improve the frictional resistance.

碳含量对耐磨性的影响主要是通过对基体残余奥氏体量和碳化物形态表现出来的，适量的残余奥氏体使基体具有较好的冲击韧度及硬度；形态较为固整的VC颗粒，对裂纹的萌生及扩展起阻碍作用，从而使材料的耐磨性提高。

Afterwards, we propose a new constant coefficients measurement method in dynamic equation of robot manipulators, this measurement method includes three groups of experiments: group one, let each joint of robot manipulator keep static to measure the constant coefficients in gravity term of dynamic equation and Coulomb frictional torque, group two: let only one joint of robot manipulator move at a constant velocity to measure the viscous frictional coefficient and constant coefficients in effective inertia of dynamic equation, group three: let only one joint of robot manipulator move at constant acceleration at a time to measure constant coefficients in Coriolis and centrifugal term and coupling inertia of dynamic equation.

让操作器单个关节恒速运动，在对驱动系统中传动机构，减速装置和电感系数综合考虑的基础上，这组实验对粘滞摩擦系数及有效惯量中常数系数进行测量。这种测量方法只要求旋转关节的驱动电机施加恒定电压，回转关节驱动电机施加正弦波电压。3。让操作器单个关节恒加速运动，这组实验测量动力学方程中哥氏力、离心力项和耦合惯量项中的常数系数，这种测量方法只要求单个关节匀加速运动，而其它各关节保持静止，这种测量方法虽然要求关节匀加速运动，但不必进行关节角加速度检测，而只需进行关节角位移和角速度检测即可，输入量直接给定为输入电压。

These changes violate Newton's First Law, the Law of Inertia which implies that more energy is needed to change inertia (to overcome frictional forces and inertia) than to maintain inertia (to overcome only frictional forces).

这些变化违背了牛顿第一定律，也就是惯性定理――在不受外力或所受外力为零的状态下，物体总保持匀速运动或静止――也就是要改变物体的惯性需要额外的能量大于保持物体惯性的能量。

The combinations of 0.018 inch stainless steel round wire and all brackets produced significantly the lowest static and dynamic frictional resistance than that of other archwires . The 0.019× 0.025 inch stainless steel rectangular wire produced the highest static and dynamic frictional resistance combined with all preadjusted brackets combinations .

在4种弓丝中，0.019× 0.025英寸不锈钢方丝动、静摩擦力最大，0.018英寸不锈钢圆丝的动、静摩擦力最小，两者之间有显著性差异；0.020英寸不锈钢圆丝与0.019×0.025英寸不锈钢方丝之间无显著差异。

It is shown from this thesis that flow fields on synoptic maps can be decomposed into rotation and deformation fields. Geostrophic non-frictional cyclone and anticyclone vortex patterns are closed circulations around the center point, streamlines of frictional cyclone and anticyclone patterns have spiral forms around the focus point. Saddle fields have four vortex centers (two cyclones and two anticyclones) and a saddle point. Blocking high pressure and cut-off low pressure patterns consist of a vortex center and a saddle point.

本文说明了天气图上的流场可以分解为旋转场和变形场：地转无摩擦的气旋、反气旋的涡旋型式是围绕中心点的闭合环流；考虑摩擦的气旋、反气旋的流型是围绕焦点的螺旋型式；鞍型场有4个涡旋中心点（2个气旋和2个反气旋）与1个鞍点；阻塞高压和切断低压由1个涡旋中心点与1个鞍点组成。

He's a pretty westernised kind of guy.

他是一个非常西化的人。

National spirit is the moral kingpin for a nation to realize common ideal and goal.

一、中华民族精神的基本内涵党的十六大报告指出：在五千多年的发展中，中华民族形成了以爱国主义为核心的团结统一、爱好和平、勤劳勇敢、自强不息的伟大民族精神。