查询词典 developable surface

The results show that the technical parameters and the concentration of sodium molybdate have obvious effect on the composition of the alloy. The crystal grain size is from 6.2 to 12.7 nm and changes with current density, temperature and the pH value of the electrolyte.The crystalline growth of the alloy accords with the model of three-dimensional growth. The surface morphology is mainly determined by the rate competitions between the growing direction of vertical surface and the expanding direction along the surface towards circumambient. The results of the X-ray data show the presence of the multiphase containing solid solution and intermetallic compound in the deposits. The deposit phases alter from the FeNi and FeMo solid solution to the FeNi and MoNi4structure at 3 A/dm2. The deposits internal stress increases linearly with the decrease of the grain size. The lattice parameter of the deposits are slightly distorted

结果表明：工艺条件和钼酸钠浓度对合金组成的影响较大；所得合金晶粒尺寸为6.2~12.7 nm，并随电流密度、温度和电镀液的pH值的改变而变化；合金的晶体生长符合晶核三维生长模型，镀层表面形貌由平行和垂直于基体的生长速度的相对大小决定；镀层物相为固溶体和金属间化合物的多相结构，当电流密度为3 A/dm2时，镀层物相由FeNi和FeMo固溶相转化为FeNi和

Alloy of polyethylene of element of the methodological freeboard that make, titanium and sample of alloy of cobaltic chromic molybdenum, FITC of classics of cuticular grape coccus labels, the cuticular grape coccus that after sample of artificial and articulatory material is disinfected, vaccinal FITC labels, sample surface cent is slick surface and rough surface, every groups each 6 sample, brood the 24 orifice plate that contain bacterium and sample below 37 ℃ after Yo 30min, with fluorescent microscope observation, sample uses observation of scanning report lens.

方法制作超高分子聚乙烯、钛合金和钴铬钼合金试样，表皮葡萄球菌经FITC标记，人工关节材料试样消毒后接种FITC标记的表皮葡萄球菌，试样表面分为光滑表面和粗糙表面，每组各6个试样，将含有细菌和试样的24孔板在37℃下孵育30min后，用荧光显微镜观察，试样用扫描电镜观察。

The surface of image can be looked as a curved surface, and we can simulate a conicoid function in local area. Based on this function we can estimate the gradient and the curvature of the curved surface points, and set proper thresholds of gradient and curvature, we can detect the centre lines of roads with correlative process including removing small areas, area growth, thinning, etc. Lastly through seting proper thresholds of the gradient and the curvature again, the original road junctions can be detected and then verified by the road lines detected formerly.

基于微分几何的道路交叉口识别方法：把影像的灰度表面看作是一个曲面，在局部区域内拟合一个二次曲面函数，通过该函数来估算梯度和曲率并设定合适的梯度和曲率阈值来检测道路中心线，并进行相关处理，例如去除小区域、区域增长、细化等，然后再设定合适的梯度和曲率阈值，检测出初始道路交叉口，并用检测出来的道路来进行确认。

Ten contamination features are extracted from the contaminated insulator infrared image,viz.the highest , the lowest , the mean temperature of the background, the temperature variance of the background ,the highest ,the lowest ,the mean temperature of the contaminated insulator discal surface , the temperature variance of the insulator discal surface ,the maximum and the mean temperature increase of the discal surface contrasting to the mean temperature of the background .

本文研究从分割后的污秽绝缘子盘面图像中提取了10维原始污秽特征，即：绝缘子红外热像背景的最高温度、最低温度、平均温度、背景温度分布的方差值、盘面图像的最高温度、最低温度、平均温度、盘面温度分布的方差值、盘面温度的最大温升、盘面温度的平均温升。

The support element is displaceable between at least two positions, a 'storage' position where the at least one support element essentially lies up against an outer surface of the camera device and an 'active' position where the at least one support element is displaced away from the outer surface of the camera device in order to provide a support for supporting the camera device in a steady orientation on a surface.

这种支撑元件可在至少两个位置之间位移，即&储存&位置和&活动&位置，在这种&储存&位置中，该至少一个支撑元件倚在该摄影机器件的外表面上而基本上隐藏，在这种&活动&位置中，将该至少一个支撑元件从该摄影机器件的该外表面位移，以提供用于将这种摄影机器件以稳定的取向支撑在表面上的支撑。

To resolve this behavior, only the surface business card printing and membership card making to set to print in ink that is not on the surface without worrying about the colour, there are three ways: the first one is a drumlike complex members'meeting, Bopp/business card printing and membership card making/PE, such a structure you need to have special line cost more per bag fee in order to achieve $ 0.10/only, the second film structure is the PE/business card printing and membership card making/PE, such a structure common packaging equipment can also be filling, but cost more, each bag shall be $/only 0.08, the third option is the-tape-PE/business card printing and membership card making/PE structure in the original film, that is, the members'meeting membrane business card printing and membership card upon completion of the making of the operation, the business card printing and membership card making surface salivate a layer of transparent with thin-film, this is our company according to actual usage of the product structure specially developed.

给彻底处置这一不隐象，只有不兵暗地制卡和会员卡制作改不败边印，油不朱不在暗地也不离供给安心掉色，办法有不一栽：第一栽是复不合奶膜布局为BOPP边/制卡和会员卡制作/PE边，这样的布局需有附带灌装摆设，不败本也较矮，每一个袋子用度给到达0.10元/只把握），第二栽膜的布局是PE/制卡和会员卡制作/PE，这样的布局别致灌装摆设也可灌装，但不败本还是较矮，每袋须0.08元/只把握，第不一栽办法是流延PE/制卡和会员卡制作/PE布局不厚膜，即在原奶膜制卡和会员卡制作完不败后，再增增一道工序，在制卡和会员卡制作背流涎一层透明的较不厚的不厚膜，这是我们公司根据客户本质搁置环境出格开不收的产物布局。

The method is based on the formation and deformation of double-stranded DNA membrane on a gold surface, which can encage reporter molecules between the gold surface and the double-stranded DNA, or keep them away from the gold surface.

致密的双链DNA分子层可以将电化学信号分子禁闭在金表面和双链DNA之间，或者将信号分子与金表面隔离开，使其无法接触裸金面。

The results show that, by the way of optimizing preparation condition, the spherical zirconia powders with suitable particle size distribution are prepared using chemical precipitation method. Using heterogeneous chemical precipitation coating technique, the sph, erical nickel coated zirconia powders are prepared and the heterogeneous nucleation can be done on the surface of spherical zirconia powders. The thickness of coated layer, homogeneous degree and crack of surface can be controlled by the way of controlling powder concentration, adding rate of reactants feeding and adding surface active agent.

研究表明，采用化学沉淀法，通过优化制备工艺条件，可以制备粒径分布较均匀的球形氧化锆粉体；利用非均相化学沉淀包裹技术制备的金属镍包裹氧化锆微球粉体，球形氧化锆颗粒表面作为异相成核的场所，通过控制颗粒浓度、加料速度以及添加表面活性剂等工艺条件，可以调控包裹层厚度、表面均匀度以及表面裂纹等。

A part of the flat fibers remained on the sheet surface and the interspace among the fibers became narrow after chlorine dioxide bleaching. The fibers of bagasse and bamboo unbleached pulps were rough, the fiber surface was smooth, and the fiber structure was dense. After oxygen delignification and chlorine dioxide bleaching, the fibers became much more thin, the fiber surface was slightly fibrillated, and the fiber structure was loosen.

经氧脱木素后，纸页表面细小纤维明显减少，纤维间空隙较多，而经二氧化氯漂白后的纸页表面保留了一部分形态扁平的纤维，纤维间空隙相对较少；蔗渣和竹子未漂浆纤维较粗，纤维表面光滑，结构密实，而经氧脱木素和二氧化氯漂白后，纤维明显变细，纤维表面轻微帚化，结构较疏松。

The role of surface treatment is to improve the film surface tension so that it is greater than the ink to the surface tension of the ink and the correct filmogen.

表面处理的作用是提高薄膜的表面张力，使其大于油墨的表面张力，从而达到油墨和薄膜材料的正确结合。

Many will continue to choose to live in duality and in conflict.

许多人将继续选择活在二元对立性和冲突中。

I find that students of the University of Physical Education all wear sportswear at first sight.

我发现：体育大学的学生乍一看，都是穿运动衣，大家都一样