查询词典 conventional

In this thesis, three major achievements were made in theoretical study: conditions and rules for preparing nano-powders by chemical precipitation are analyzed from the point of view of thermodynamics and kinetics, the principle, standards and experimental method for the aqueous dispersion of nano-scaled metal oxide powders were proposed and verified, mathematical model of nano-filming addition of dopants by chemical coprecipitation was established. In experimental research, nm-ZnO, nm-Bi〓O〓, nm-Co〓O〓 and nm-MnO powder with spherical shape, narrow particle size distribution and small particle size were prepared successfully, highly stable and dispersive aqueous suspensoid of nm-ZnO, nm-TiO〓, nm-Co〓O〓 and nm-MnO powder were prepared successfully and surface modification on these nano-powders was also achieved, 0-3 nanocomposite ZnO varistors with nm-ZnO, nm-TiO〓and nm-MnO respectively were prepared successfully by conventional mechanical attrition, and exhibited much better electrical properties than those of conventional varistors.

综上所述，本文在理论研究方面取得了三项成果：（1）从热力学和动力学角度推导并分析了液相化学沉淀法制备纳米粉体的反应条件和规律，（2）提出了纳米氧化物的水分散体系的设计原理、规范和通用实验步骤，（3）提出了共沉淀的数学模型和计算方法；在实验方面所取得的成果有：（1）成功制备了粒度小、分布窄、形貌对称的纳米氧化锌、纳米氧化铋、纳米氧化钴和纳米氧化亚锰，（2）成功地制备了纳米氧化锌、纳米二氧化钛、纳米氧化钴和纳米氧化锰的高稳定分散悬浮液并实现了干粉体的表面改性，（3）成功地进行了纳米氧化锌、纳米二氧化钛和纳米氧化锰对压敏电阻的0—3复合掺杂实验，试样性能远优于常规压敏电阻，为实现压敏电阻的高能高压化提供了新的方法和思路。

Through hang together the simplex data model based on dissection and conventional GIS data model, we develop a integrated and polymorphic model, object oriented unified model of tessellated simplex and conventional GIS, which convenient to inherit and congregate. The model manage the abstracted data accord to 4 level factor, that is geometry object model, topologic geometry object view model and geography object model.

论文采用面向对象的方法把基于剖分的单纯形数据模型与传统的GIS数据模型结合在一起，提出并建立了一个便于继承、组合、多态的较完整的三维数据模型与结构一面向对象的单纯形剖分与GIS一体化三维数据模型。

For Berkshire's shareholders, myself included, the cost of this thumb-sucking has been huge. o Our consistently-conservative financial policies may appear to have been a mistake, but in my view were not. In retrospect, it is clear that significantly higher, though still conventional, leverage ratios at Berkshire would have produced considerably better returns on equity than the 23.8% we have actually averaged. Even in 1965, perhaps we could have judged there to be a 99% probability that higher leverage would lead to nothing but good. Correspondingly, we might have seen only a 1% chance that some shock factor, external or internal, would cause a conventional debt ratio to produce a result falling somewhere between temporary anguish and default.

另外我们一贯保守财务政策可能也是一种错误，不过就我个人的看法却不认为如此，回想起来，很明显的我们只要能够再多用一点财务杠杆操作(虽然较之他人还是很保守)，就可以得到远比现在每年平均 23.8%还要高的投资报酬率，即使是在 1965 年我们也可以百分之九十九地确定高一点的财务杠杆绝对只有好处没有坏处，但同时我们可能也会有百分之一的机会，不管是从内部或是外部所引发令人异想不到的因素，使得我们负债比率提高到介于一时冲高到负债倒闭之间。

At 135 mm depth and 0.28 m/sec speed, the biomimetic furrow opener surface with UHMWPE tubular ridges recorded 0.62 kN and 0.17 kW, while at 135 mm depth and 0.92 m/sec speed, the values were 0.91 kN and 0.82 kW. The experimental values of resistance force and power for the conventional surface furrow opener at 100 mm depth, and 0.28 m/sec speed were 0.72 kN and 0.20 kW, while at 100 mm depth and 0.92 m/sec speed, the values were 1.11 kN and 1.0 kW. At 135 mm depth and 0.28 m/sec speed, the conventional surface furrow opener recorded 0.93 kN and 0.25 kW, while at 135 mm depth and 0.92 m/sec speed, the values were 1.50 kN and 1.35 kW.

试验测试结果：当耕深100 mm和耕作速度0.28 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为0.72kN和0.20kW；当耕深100 mm和耕作速度0.92 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为1.11kN 和1.0kW；当耕深135 mm和耕作速度0.28 m/sec时，实测的普通开沟器的土壤阻力和动力消耗分别为0.93kN和0.25kW；而当耕深135 mm和耕作速度0.92 m/sec时，实测的普通表面开沟器的土壤阻力和动力消耗分别为1.5kN和1.35kW。

The predicted values of resistance force and power for the conventional surface furrow opener at 100 mm depth and 0.28 m/sec speed were0.51 kN and0.14kW, while at 100 mm depth and 0.92 m/sec the values were0.98kN and0.88kW. At 135 mm depth and 0.28 m/sec speed, the conventional surface furrow opener recorded 0.70 kN and 0.20 kW, while at 135 mm and 0.92 m/sec speed, the values were 1.40 kN and 1.26 kW. The predicted values of resistance force and power for the biomimetic furrow opener surface with UHMWPE tubular section ridges at 100 mm depth and 0.28 m/sec speed were 0.45 kN and 0.12kW, while at 100 mm depth and 0.92 m/sec speed, the values were 0.73kN and 0.66 kW.

对于超高分子量聚乙烯材料仿生脊型非光滑结构表面，当耕深100 mm和耕作速度0.28 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.45kN和0.12kW；当耕深100 mm和耕作速度0.92 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.73kN和0.66kW；当耕深135 mm和耕作速度0.28 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.62kN和0.17kW；而当耕深135 mm和耕作速度0.92 m/sec时，预测的仿生开沟器的土壤阻力和动力消耗分别为0.91kN和0.82kW。

Compared with conventional rolling,yield stress and ultimate tensile stress in the annealed DSRed AZ31 magnesium alloy sheet were almost the same to the conventional rolling,while the room elongation of annealed DSRed AZ31 magnesium sheet was improved.

非对称热挤压制备的AZ31镁合金板材厚度方向上存在晶粒尺寸梯度，上表层平均晶粒尺寸最小2.50μm下表层最大(3.67μm中间层晶粒尺寸介于两者之间(3.13μm)。

The conventional database is unactuated. It is drived by users or programs. The conventional database executes the transaction when a users or a application program requests so.

传统的数据库是被动的，由用户或程序驱动，仅当用户或应用程序提出明确要求时才执行事务操作。

Mold with baking soda as long as it is certainly not achieve bactericidal action, it is recommended to do in order leucorrhea conventional, because such a time, there may be changes, I found mold on 5 with a three-day drug, but also outside the washing soda , the situation improved, but also easy to check the recurrence of .6 months leucorrhea not conventional mold, but there is vaginal inflammation, washing lotion with medicine, and 7 months time to check card or a vaginitis, Trichomonas Streptomyces are is negative.

只要是霉菌用小苏打肯定起不到杀菌作用，建议再做依次白带常规，因为这么时间了，可能会有变化，我5个月查出霉菌，用了三天药，也包括小苏打外洗，情况好转，但也容易复发。6个月检查白带常规霉菌没有了，只是阴道还有炎症，用中药洗液洗的，7个月的时候去查阴道炎证也好了，霉菌滴虫都是阴性。

The results show that the porosity of the membrane prepared by ScCO_2 induced phase separation is higher than that prepared by conventional method;the membrane structures are significantly influenced by the process parameters;compared with the conventional immersion precipitation phase inversion,ScCO_2 induced phase separation process can effectively avoid the formation of macrovoids at suitable operating conditions;during depressurization process,the great differences in the effect of depressurization time on membranes structure for various polymer materials result from that the speed of CO_2 gaseous nuclei escaping from membrane substrate can not keep the pace with the outer depressurization rate.(2) The tendency that the interaction parameters affect the binodal curve position is illustrated by changing the interaction parameters in reasonable ranges.

研究结果表明：与传统方法相比，采用ScCO_2诱导相转化法可获得更高的膜孔隙率；通过改变操作参数可对膜的结构进行调控，且操作参数对膜结构的影响与铸膜体系的自身性质也紧密相关；在适宜的操作条件下，ScCO_2诱导相转化法能有效避免采用传统的浸入沉淀相转化法制膜时易出现的大空腔结构；泄压过程中CO_2气核从聚合物膜基体中逃逸的速度能否与膜基体外部的泄压速度保持同步，是泄压时间对不同材质膜结构影响截然不同的根源所在。

In addition, oxygen delignification and reinforcedoxygen-delignification of RDH kraft pulp and conventional kraft pulp, effects of various pretreatment methods on oxygen delignification efficiency, bleachability of RDH pulps and conventional kraft pulps and improved hydrogen peroxide bleaching with additives were also researched.

此外，论文还对桉木常规硫酸盐浆和RDH硫酸盐浆的氧脱木素、强化的氧脱木素、各种预处理方法对氧脱木素效果的影响以及它们各自的漂白性能进行了研究；对桉木硫酸盐浆的H〓O〓漂白时，各种助剂对H〓O〓漂段的改善效果进行了有关的研究和探讨。

He is the most remarkable man that I have ever known.

他是我知道的人中最值得注意的人。

Increased appearance of lymphocele was noticed in patients with diabetic nephropathy, congenital malformations of the urinary tract, and inflammatory diseases, including glomerulopathy and extraglomerular ones, after high-voltage radiotherapy and after removal of the renal graft.

经过高压放射疗法和切除移植肾后，在糖尿病肾病患者、泌尿系统先天性畸形患者和炎症患者身上发现淋巴囊肿有所增加，包括肾小球病和球外疾病等。