查询词典 analyzed

In this paper the dynamics characteristics are analyzed theoretically at first. According to the unique configuration and mechanics characteristics, the mechanics model and kinetic differential equation of the half-tracked air-cushion vehicle are established. Algorithm of mechanics and lifting-state parameters are put forward and analyzed. And variation ranges of the driving state parameters are obtained and the corresponding influence factors are analyzed. The further qualitative studies on control model are carried out.

因此，本文首先从理论上分析了半履带式气垫车的动力学特性，根据半履带式气垫车的独特结构和力学特性，建立了半履带式气垫车的力学模型和相应的运动微分方程，提出并分析了在纵摇与升沉运动时，半履带式气垫车的力学参数和垫升状态参数的计算方法，得到了在行驶过程中各运行状态参数的变化规律，并分析了相应的影响因素，进而对控制对象模型进行了定性研究。

The research contents mainly include: First, the influence of foundation constraint condition to the temperature stress is analyzed, the temperature stress formula of ultra-long concrete anchor plate is deduced, then the influence of length to structure crack can be gotten from the formula. Second, a breathing method is set up to solve the problem of temperature stress in ultra-long concrete constructions. By setting the sliding floor, a breathing system is built up and the temperature stress reduced distinctly. Third, the effect of prestress technique in the control of temperature stress is analyzed, it is simulated and calculated through FEA to get the right way to apply the prestress. Forth, the delay of temperature field and unsteady conduction is considered, the temperature field of ultra-long concrete structure with later poured band is simulated, then temperature stress distribution after casting the concrete is calculated, finally the effect of later poured band to temperature stress of ultra-long structure is analyzed.

本文的研究内容主要包括：(1)分析了基础约束对超长混凝土结构温度应力的影响，推导了超长混凝土地基板温度应力公式，从而得出长度对结构裂缝的影响；(2)针对超长混凝土裂缝问题，提出了一种可呼吸的解决方法，通过设置滑动层，使结构成为一种"可呼吸"体系，从而有效的降低温度应力；(3)分析了预应力技术在控制超长结构温度应力中的作用，通过有限元模拟计算，得到合理的预应力施加方式；(4)考虑温度场的滞后效应及不稳定传导，对带后浇带超长混凝土结构浇注后的温度场仿真模拟，计算浇注后的温度应力分布，分析后浇带对超长结构温度应力的影响。

In the light of cost index and pollution degree, the characteristics of kinds of pulp are analyzed in detail, and the GP pulp which is low cost, high-yield, no-pollution is chosen as the material of tableware. Based on material element analyzed, shaping technology is designed, the to and for single plane shaping equipment which is high shaping quality, high production efficiency and is easy to automatize is chosen. All kinds of measure are taken to solve the problems which are inequality in the shaping process of GP pulp, and dosage which matches with GP pulp is chosen. Some ways of fixing shape and heat up are analyzed, the technology of saving energy of heat pressing to fix shape being composed of oil heat and only one fixed shape in the mold is applied, with which it is high production efficiency, low cost to fix shape effectively, which saves energy 30 percent. In order to make the production line meet with material of GP pulp, measure are taken to solve the problem of pulp adhered to netlike molding which can lead to carry material difficult, the structure of fully automatic equipment is renovated, the loaded beam is optimizationally designed to make equipment structure compactand improve location precision and products quality. According to technologic flow and actual characteristic, Omron PLC is chosen as the core of the control system, proximity switch as detect unit take the place of touch switch, software is designed reasonably according to time order figure, hardware is simplified, the reliability of system is advanced, the stability of system is assured to make production order. Intelligence neuron PID system is studied theoretically which is made up of both neuron with self-organizing and self-learning function and ordinary PID with the characteristic of the simple structure and high stability, which can automatically tune the parameter with the change of system parameter, remain perfect performance.

按成本指标和污染程度分析各浆料的特点，选择低成本、高得率、无污染的磨石机械浆为原料，在原料组分分析的基础上，设计成型工艺，选择成型质量好、生产率高、易实现自动化的往复式单板成型机，采取各种措施解决GP浆成型不均匀的问题及选择与机械浆相匹配的助剂；分析几种定型方式和加热方式，采用定型效果好、生产率高、成本低的油加热与模内一次性定型相结合的热压定型节能技术，节能30％；为了使生产线适应磨石机械浆原料，采取相应措施解决由于粘网造成物料转移困难，对全自动设备结构进行改进设计，着重对物料传送系统的关键部件——承载梁的进行优化设计，使设备更加紧凑合理，提高设备的定位精度和产品质量；根据生产线工艺流程和现场特点，选用OMRON CPM1A型PLC为主核心，接近开关作为检测元件，替代有触点开关，选用可编程终端代替常规面板按扭，并按照时序图科学合理地设计软件，有效地简化系统硬件构成，提高系统的可靠性，保证系统的稳定性，从而使生产更加通畅有序；从理论上探索将神经元应具有的自组织、自学习要求与PID控制结构简单、稳定性好的全自动纸浆模塑餐具生产线的研究特点结合起来，构成神经元自适应PID控制器，当参数的变化时，系统能自行参数整定，保持优良的工作性能指标，满足实际需求。

In this dissertation, GPS baseline solution precision is analyzed since the following aspects: 1, Different length baselines are processed and analyzed by single frequency model and ionosphere free model. 2, Basing on current single point positioning precision, certain coordinate error is added into fixed points to study the result. 3, Baseline is processed and analyzed with different observation vectors and their lineal combination models. 4, 24 hours observation was divide up to process baseline.

本文从以下几个角度研究了影响GPS基线解算精度的因素：1、采用单频和消电离层模式对不同长度的基线分别解算，对处理结果进行分析。2、根据目前单点定位精度给起始点加上适当的坐标偏差，研究起始点坐标偏差对基线处理结果的影响。3、选用不同的观测值及其线性组合，对基线解算结果进行研究。4、对24小时观测的数据分时段处理，分析观测时间段对基线处理结果的影响。

The thesis can be divided into five parts as follows: First, the structural characteristics of finned-pipe evaporator are analyzed. After selecting suitable microelement controller, the heat-transfer and mass-transfer processes are analyzed for every microelement under the conditions of dryness, wetness and frostiness. Based on previous equations, some parameters of frostiness are confirmed and the frost-growing model is set up under frost condition. Some hypotheses are postulated and with the help of the equation of mass-conservation, energy-conservation and momentum-conservation, the evaporation model which fits in the dynamic simulation is built, which set a solid foundation for system simulation. Second, the starting and stopping behaviors under disturbed condition are analyzed and calculated by using the dynamic concentrative parameter model, which gives some advice to better prescribe refrigeration system and set theoretic foundation for carrying out automatic control of refrigeration system. Third, the normal running process is analyzed and calculated by means of rational matching theory, which gives some advice on how to better understand the parameter change under steady state and the affection of inlet-parameter on evaporator. Fourth, the simulation software with dynamic characteristic is designed, which can be applied to calculate thernio-parameter of cryogen, air humidity and frost thickness under different initial and boundary conditions, and to carry out dynamic simulation under conditions of dryness, wetness and frostiness, at the same time, to achieve detection and simulation at any stage from starting to stopping.

本文的主要内容如下：1对翅片管蒸发器结构特点进行分析，选取适当的微元控制体，就干、湿和霜工况下对每个微元分别进行传热传质分析，基于经验关系式确定霜的有关参数，对于霜工况下的霜生长建立模型，经适当假设，运用质量守恒、能量守恒和动量守恒方程建立适合动态仿真的蒸发器数学模型，为系统仿真奠定基础； 2对蒸发在大扰动下的开、停机过程，运用动态集中参数模型进行分析和计算，为更好地描述制冷系统运行的全过程奠定基础，同时也为制冷系统实现自动控制提供一定的理论基础； 3对蒸发器正常运行过程，运用动态分布参数和参数间定量耦合的观点来分析和计算，为更好地了解稳态工况下各点参数的变化情况及各入口参数对蒸发器动态特性的影响即蒸发器性能对各参数变化的敏感性； 4编写翅片管蒸发器动态特性仿真计算程序，可以计算不同边界条件和初始条件下的制冷剂热力参数、空气温湿度和霜厚度分布场，实现对翅片管蒸发器在干、湿和霜工况下的动态仿真。

And presents some commonly process and attentions in applying the FEM software ANSYS to PCM analysis.2 Analyzed the PCM performances under the affection of piezoelectric and polymer"s material characteristic by FEM, and got the rule.3 Analyzed the PCM performances which affected by stickup layer"s materials characteristic and its thickness under the application of FEM.4 Based on the construction principles of 1-3 type orthotropic piezoelectric composite materials, the finite element model is designed and its orthotropy is analyzed, at the same time, the length/broad ratio to PCM orthotropy is also analyzed.

二、应用有限元法分析了压电相材料和聚合物基体相材料特性对于压电复合材料综合性能的影响规律。三、应用有限元法分析了粘贴层的材料性质和厚度尺寸对压电复合材料在实际应用中性能的影响规律。四、根据提出的正交异性压电复合材料的构造原理，设计出1-3型正交异性压电复合材料的有限元模型并分析其正交异性，同时分析了压电相材料长宽比对其正交异性的影响。

The management and quality analysis of the primitive images have been analyzed and studied in this paper, of which the content and structure are as follows:Firstly, the developing background and the meaning of the management and quality analysis of the primitive image, as well as the trends of the management and data quality of the image database studied both in and out of our country, have been discussed in detail.Secondly, the developing direction of the technology of the remote sensing image and the importance of the remote sensing images in the field of economy nowadays have been analyzed systematically. And it is pointed that the primitive image with the elements of interior and exterior orientation will become more and more important as a sort of image production.Thirdly, the hierarchical structure of database, especially the SQL Server adopted in this system, has been deep studied and analyzed in the aspects of Applying Program Interface, Internet Data Connector and ActiveX Data Object.Fourthly, the methods of assessing the quality of the remote sensing image have been put forward in the terms of geometry, construction and the integrality of the assistant information.Fifthly, the model of propagation of errors of the precision of the ground coordinates has been calculated in the steps of inner orientation, spatial resection and answering based on the deep analysis of the principles and processes of inner direction and space resection, which have also been experimented and analyzed in term of numerical value.Finally, the total design and the idiographic realization of the sub-modules have been introduced in detail, based on which the design and development of this system are realized in combination with the program languages such as VB6.0, VC6.0 and SQL.

本文针对原始影像的管理与质量分析进行了深入的研究与探讨，主要内容包括：(1)首先对原始影像管理与质量分析系统的研制背景和意义进行了详细论述，并对影像数据库管理和数据质量研究的国内外动态作了介绍；(2)对遥感影像技术目前的发展趋势以及遥感影像在国民经济生活中的地位进行了深入的分析，并指出附带有内外方位元素的原始影像作为一种影像产品将越来越会引起人们的重视；(3)对数据库的体系结构进行了深入的研究与分析，尤其是对SQL Server数据库的体系结构，从编程接口、Internet数据连接器和ActiveX数据对象三个方面进行了深入剖析；(4)从几何质量、构像质量和附属信息的完整性三个方面提出了对遥感影像质量的评定方法；(5)基于对内定向和空间后方交会原理及过程的深入分析，推导出了从内定向到空间后方交会再到最终求解地面坐标的误差传递模型，并对上述模型进行了数值实验和分析；(6)对原始影像管理与质量分析系统的总体设计和各模块功能的具体实现进行了详细的介绍，并在此基础上联合VB6.0、VC6.0和SQL等编程语言，实现了系统的设计与开发。

Motibity changed by gear-box in direction and rotate speed is transferred to the blade axis on the right side to drive the blade axis. blade axis'parameter, blade assembling frame and blade assembling means are ascertained. The load and movement of the blade axis are analyzed. And the best blade rotate speed is ascertained. According to the request of no-tillage soil, the appropriate furrow openers are chosen. They are staggered and assembled in two rows .According to the sliding cutting request, the crucial parts of the anti-blocking——the sliding cutting blade, its edge curve is analyzed and designed in principle. The academic curve function is gotten. Combined with working practice and technics request, the blade's figuration parameter is designed, 65Mn is chosen as the material for blades. The working load is analyzed. And the intension of the sliding cutting is analyzed and checked with ANSYS software. At last, the spring rack of the suppress wheal is analyzed in principle. The theory and parameter of designing the spring rack of the suppress wheal. Experiment indicated that the anti-blocking capability of this anti-blocking equipment was excellent.

设计出适合此防堵装置的动力传输方案，动力经变速箱变向变速后从右侧传给刀轴，驱使刀片切割秸秆；确定出了刀轴的参数、刀片的安装结构和安装方法，对刀轴的受力和运动进行了分析，确定出了刀轴最佳转速；根据免耕地的要求，选择恰当的开沟器，并采用双排错位安装的办法，避免了"瓶颈"现象的发生；根据滑切的要求对此防堵装置的关键部件——滑切刀片的刃口曲线进行了理论分析和设计，得到了刀刃的理论曲线方程；结合生产实践及工艺要求，设计出刀片的外形参数，选择65Mn作为刀片的材料；分析和计算了刀片在工作中承受的载荷，运用ANSYS 软件对滑切刀片的强度进行了分析校核；最后对镇压轮的弹簧支架结构进行了理论分析，提出了设计镇压轮弹簧支架的理论和参数依据。

They are: the achievements of textual research and exegesis of Zhu Zi Xue in Qing Dynasty; the promoting effect of the introducing Western theories that took on the research of Chinese classical logic; taking the doctrine of Moism and scientific logic method as a methodological weapon for propagating reformist thought and Liang Qichao"s favor to Mo Zi and theory of Moism.The second part is about Liang Qichao"s achievements of logic and methodology: he analyzed induction and deduction, and thoroughly analyzed induction in particular, and his thought about those was mainly correct; he analyzed comparison as a component of induction and discussed the cognitive function of comparison, he also explained how to use comparison in the research of history; he not only explicated the thinking process of analytical method and synthetic method, but also integrated the two methods with studying history and reading history , and turned them into specific research methods of history ;he expound the rule of causal law , just as Leibnizs principle of sufficient reason in Western modern times and the law of sufficient reasonin universal logic; he discussed nominal classification, and analyzed wrong classification of the forefathers, then he pointed out the significance of clarifying the basic of division .

不足在于：①梁启超对于各种科学方法的论述不够系统、全面；②梁启超比较研究方法仍存在一些缺陷，他的比较研究主要是将墨家论式与西方逻辑的三段论(有的与印度因明的三支作法)形式作求同研究，缺乏系统性和全面性，而且对三种逻辑的共同点和差异点的分析也缺乏理论深度，加之梁启超不懂得数理逻辑，缺乏精确的数理逻辑工具，因而使这种对比分析缺乏严密性和精确性。

Chapter 9 is conclusion and future prospect. There are five innovative findings in the paper. Firstly, the evolvement of extensions and connotations of two reengineering styles is analyzed based on their high risk, and finding their trends of amalgamation. With this, the concept of corporation reengineering is then redefined combining core competence theory and ideas of process change management, and decompounding it into two parts: pre-reengineering and post-reengineering. Its inner relationships are analyzed and explained by economics theory. Secondly, establishing a analysis framework of reengineering risks, risk factors of foreign BPR are analyzed and concluded systematically for the first time. Reengineering risks are divided into three parts: plan, design and executive based on process and project management, then risk factors system is abstracted. Thirdly, 72 reengineering corporations in Jiangsu province are investigated on risk condition. Furthermore, risk factors in every part are analyzed and reduced experimentally by factor analysis method, and a risk factors system to suit Chinese corporation's reengineering is established. Fourthly, setting up a choice model of reengineering projects, the objective optimization model is presented to ascertain the weigh of each factor, a method of sequencing reengineering projects is presented so that risk of each reengineering project can be evaluated and compared effectively. Fifthly, an integration relationship model among IT, BPR and strategy is established aiming at productivity paradox derivative from IT and its dual effects on BPR, IT investment priorities in BPR is narrated deeply.

本论文的创新点体现在五个方面：1）基于上述两种重组方式的高风险性，对它们的外延和内涵演变进行了分析，发现它们日益融合的趋势；然后结合核心能力理论和流程变革管理的思想对企业重组的概念进行了界定，将其分为&前重组&和&后重组&两部分，并对其内部关系进行了详细分析，同时应用经济学理论对其进行了解释。2）建立了重组风险的分析框架，并首次较为全面地分析和归纳了国外企业重组的风险因素，根据重组的过程和步骤以及项目管理的观点，将重组风险划分为计划、设计和执行3个部分，并在此基础上提炼出企业重组的风险指标体系。3）运用现场访谈、问卷调查的方法，调查了江苏省72家企业重组的风险情况，然后利用因子分析法对每一部分的每一风险因素进行实证分析，对风险指标进行了约减，建立了比较完善的适合我国企业的重组风险指标体系。4）建立了重组变革方案的选择模型，然后针对不同的重组方案提出了确定指标权重的目标优化模型，并基于三角模糊数之间两两比较的可能度概念，提出了一种重组方案排序法，从而可以有效地对各种变革方案的风险进行评估和比较。5）针对信息技术所造成的&生产率悖论&现象及其对重组的双重影响，建立了信息技术、企业重组和企业战略之间的整合关系模型，并对重组中信息技术投资的优先权问题进行了深入的阐述。

It goes back to what I told you...

现在回到我告诉过你的。。。

With a supporter in Mr Charest and an admirer in Mr Dumont, Mr Harper may be encouraged to call an election himself.

由于在沙雷那边有个支持者，杜蒙那边有个崇拜者，鼓励哈珀为自己举行一次选举。