基础拓扑

词组短语

underlying topology

与基础拓扑相关的网络例句 [注：此内容来源于网络，仅供参考]

In the existing network's foundation, will gather slightly turning on to big gathering turning on reforming, the core backbone level does not make turning on principle, only makes the exchange, guaranteed that the IPv4/IPv6 network can simultaneously undertake IPv4 and the IPv6 exchange of information, guarantees its performance, reduces the promotion risk, the network analysis situs by original Shan Xing the analysis situs, changes the two stars analysis situs, the Integral part uses double turns over to turning on, guarantees the IPv4/IPv6 production network stably reliable.

在现有网络的基础上，将小汇聚接入向大汇聚接入转型，核心骨干层原则上不做接入，只做交换，确保 IPv4/IPv6网络能同时承担 IPv4和 IPv6信息交换，保证其性能，降低升级风险，网络拓扑由原来的单星拓扑，改为双星拓扑，重要部门采用双归接入，确保 IPv4/IPv6生产网稳定可靠。

In this thesis,we mainly study complete noncompact Riemannian manifolds with Ricci curvature bounded from below. We study the topology of these manifolds via comparisonal geometry methods.In chapter 1 ,we will make a general description on the recent researches in our field.

在本文中，我们主要研究了Ricci曲率有下界完备非紧的Riemann流形的拓扑问题，在比较几何的基础上研究了有特定曲率条件的Riemann流形的拓扑，得到了有关其拓扑结构的一些结果。

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component. For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper. For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space state informatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision. Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为（n-1）维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料（单质材料作为特殊的功能梯度材料看待）、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component.For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material .distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper.For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space stateinformatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision.Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为(n-1)维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料(单质材料作为特殊的功能梯度材料看待)、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

In the last chapter, on the basis of theories in paper [4, 5], the notions of strong mixing, weak mixing, generator and expansion of the variable-parametric dynamical system are introduced, it turns out that in variable-parametric dynamical system strong mixing implies weak mixing and then implies transitivity; it is proved that if and both are variable-parametric dynamical system, F conjugates with G , the members of F are communicate with each other and the members of G are also communicate with each other, what's more, they are both homeomorphism, then F is strong mixing implies G has the same properties; futhermore, we prove that F is strong mixing implies F Devaney chaos in the sense of modification in variable-parametric dynamical system and that F Devaney chaos in the sense of modification if and only if G Devaney chaos in the sense of modification when semi-conjugate with and they both are communicate and homeomorphism; at last, we illustrate that F has generator if and only if it has weak generator, and we also prove that if F is expansion, then F has generator.

在第三章中，我们在文[4，5]的基础上，提出了变参数动力系统拓扑强混合、拓扑弱混合以及变参数动力系统的生成子、扩张的概念；证明了变参数动力系统拓扑强混合蕴含拓扑弱混合，进而蕴含拓扑传递；证明了：如果，为两个变参数动力系统，F与G拓扑半共轭，且F两两可交换，G两两可交换，它们均为同胚映射，那么F拓扑强混合，则G也有同样的性质；本章还证明了变参数动力系统拓扑强混合蕴含F在修改的意义下Devaney混沌；在此基础上得出了：如果变参数动力系统与变参数动力系统拓扑半共轭，它们都两两可交换，并且它们均为同胚映射，那么F在修改的意义下Devaney混沌当且仅当G在修改的意义下Devaney混沌；得出了F有生成子当且仅当F有弱生成子；如果F是扩张的，则F有生成子。

We present a SNMP-based topology discovery algorithm using direct connection theorem and simple connection theorem for judging relationship of switches in subnets. In order to in discover the map of network without SNMP, several key problems such as subnet guessing and multi-address routers are discussed in details. And then a topology discovery algorithm based on primitive protocols is presented. We also deeply study some routing protocols such as OSPF and BGP and propose a routing-protocols-based algorithm for topology discovery.

基于判断交换机互联的直接连接定理和间接连接定理，提出了一种完整的基于SNMP的拓扑发现算法；详细讨论了子网获取、多址路由器处理等关键问题，针对不同的网络环境给出了相应的解决方案，并以此为基础提出了一种基于通用协议的拓扑发现算法；在对OSPF，BGP等网络路由协议进行分析的基础上给出了一种基于路由协议的拓扑发现算法，并设计了一个自上而下的拓扑发现框架结构。

This paper aims at the prominent issue that current models of spatial topological relations can not represent complex object, among which 9-Intersections Model (9IM) is well known. Therefore, taking cadastral data as example, one model of topological relations between complex and spatio-temporal objects based on 9IM is put forward. And the improved sweep-line algorithm is designed. Specific studies as follows:(1)According to the concepts of point set topology, the author distinguishes the complexity of the object, redefines the spatial point, line and region. For instance, in the simple region, concave one is more complex than convex, composite regions can be composed of many parts or with holes, and so on.

本文针对当前空间拓扑关系模型无法表达复杂对象的突出问题，以地籍对象为实例，以9I模型为基础，探索了一种适合复杂对象和时空对象的拓扑关系表达模型，较好地解决了地籍对象中各类要素间拓扑关系的描述和应用，实现了地籍变更中变化语义类型的推理和历史回溯；通过对现有的拓扑关系计算方法进行了改进，设计了相关算法，给出了C语言程序示例；最后通过实验系统的实现，验证了模型和算法的可行性。

With the development of Ad Hoc networks, some researchers proposed geometric routing protocols to guarantee the delivery of the packet between any pair of nodes in the network, and the underlying network topology is also constructed by the ways of Delaunay triangulation.

随着无线Ad Hoc网络的发展，一些研究者提出了可以保证网络任意节点对之间分组顺利传输的几何路由协议，而这些协议的网络基础拓扑同样可以用Delaunay三角剖分的思想来实现。

The localized manner is used to form the local Delaunay triangulation as the underlying topology of a wireless network on which the GLNFR routing algorithm could guarantee the delivery of the packets.

利用局部构造法，构造出局部化的Delaunay三角剖分作为网络的基础拓扑。

Primarily, the thesis assays the condition of network framework, the network was divided into three levels in terms of network management in order to establish the distributed method ,and still pointing out the intention and denotation of studying the Topology Discovery.Next, the thesis analyzes SNMP protocol minutely, including its development, principle, and the Network Management system that established on the SNMP protocol. Have analysed MIB in detail and the application way of MIB in network management .The thesis also assays the ICMP protocol, describing its working principle and the format of datagram minutely , and describing two important tools of ICMP- Ping and TraceRoute in detail. On the base of upper analysis, the thesis expounds a kind of distributed Topology Discovery project, and book it in one autonomy system. Topology Discovery was divided into two levels in terms of network management, and analyses the way of linking up between the two level. The thesis minutely assays Router-Level Topology Discovery technology basing on SNMP and Subnet-Level Topology Discovery technology basing on ARP and ICMP. According to these analyses, the thesis explores the specific methodology and the technology of XML data object which using the WinSNMP API to achieve topology discovering system on the development platform of Visual C++, and also analyses the technology of topology analysis and topology graph minutely. Moreover, the thesis assays the technology of basic firewall and Topology Discovery response strategy. Finally, the thesis analyses the underlying blind problem of the topology finding, and also analyses the reason that the blind problem produced and the way that reduced. The distributed algorithm that this paper puts forward has a certain directive significance in wireless network or other fields.

本文首先分析了网络结构状况，将网络从网络管理的角度划分为三个层次，为分布式的方法奠定了基础，同时还指出拓扑发现研究的目的及意义；接着本文分析了SNMP协议，详细分析了SNMP协议的发展状况，协议的工作原理，以及由SNMP协议基础上建立的SNMP网络管理体系，详细分析了MIB，以及MIB在网络管理上的应用方式；本文又分析了ICMP协议，详细描述了ICMP的工作原理和数据报格式，并详细描述了ICMP的两个重要工具-Ping 和TraceRoute；然后本文在结合上述分析的基础上，提出了一种分布式的拓扑发现方案，将拓扑发现拟订在一个自治系统内，将拓扑发现从网络管理角度划分为路由器级和子网级两个层次，分析了两个层次之间的衔接方式，同时从拓扑地域的角度将拓扑发现过程分布化，分析了分布式算法的具体方法和分布式结点之间的数据通讯方法，本文详细分析了基于SNMP的路由器级拓扑发现技术和基于ARP和ICMP的子网级拓扑发现技术；根据这些分析，本文利用XML数据对象作为分布式算法中的数据对象，分析了XML的技术，本文使用Visual C++开发平台实现网络拓扑发现系统，详细分析了使用WinSNMP API实现基于SNMP的路由器级拓扑发现和基于ARP的子网级拓扑发现，分析了使用Winsock编程实现基于ICMP的子网级拓扑发现，本文还对拓扑分析和拓扑图的绘制技术作了较细致的分析；本文最后还分析了基本防火墙技术，分析了几种类型的防火墙对拓扑发现带来的影响，以及在拓扑发现时的应对策略，本文还分析了拓扑发现中可能产生的盲点问题，分析了盲点产生的原因以及拓扑发现中减少盲点的方法。

与基础拓扑相关的网络解释 [注：此内容来源于网络，仅供参考]

Boolean algebra：布林代数

代数拓扑(Algebraic topology)是使用 的工具来研究 的 分支. 上,一个态射(morphism)是两个数学结构之间保持结构的过程的一种抽象. (布林代数)(Boolean algebra)是基本 的基础 .

default instance：默认实例

第一章 局域网基础 概述 第一节 网络分类 局域网(LAN) 园区网 城域网(MAN) 广域网(WAN) 练习 第二节 网络拓扑 星型拓扑 环型拓扑 星型环状拓扑 ...本书以Management.surpro.com公司为例,从安装SQL Server 2000系统、安装并执行默认实例(Default Instance)、数据库对象(Da

database object：数据库对象

第一章 局域网基础 概述 第一节 网络分类 局域网(LAN) 园区网 城域网(MAN) 广域网(WAN) 练习 第二节 网络拓扑 星型拓扑 环型拓扑 星型环状拓扑 ...本书以Management.surpro.com公司为例,从安装SQL Server 2000系统、安装并执行默认实例(Default Instance)、数据库对象(Database Object)的建立、T-SQL

underlying topological space：基础拓扑空间

基础群 underlying group | 基础拓扑空间 underlying topological space | 基础拓扑 underlying topology

underlying group：基础群

欠定偏微分方程组 underdeterminate system of partial differential equations | 基础群 underlying group | 基础拓扑空间 underlying topological space

underlying topology：基础拓扑

基础拓扑空间 underlying topological space | 基础拓扑 underlying topology | 未定数 undetermined number

undetermined number：未定数

基础拓扑 underlying topology | 未定数 undetermined number | 无向棱 undirected edge

undirected edge：无向棱

基础拓扑 underlying topology | 未定数 undetermined number | 无向棱 undirected edge

weil：出版《代数几何学基础>

1942:Lefschetz出版<<代数拓扑>> | 1946:Weil出版<<代数几何学基础>> | 1956:Cartan-Eilenberg出版<<同调代数>>

WLAN Design Models, Topologies, and Infrastructure：无线局域网的设计模型,拓扑结构,和基础设施

IEEE 802.11 IEEE 802.11标准 | WLAN Design Models, Topologies, and Infrastructure无线局域网的设计模型,拓扑结构,和基础设施 | Site Surveying and Network Planning现场测量及网络规划