缸

The first direct measurement with micrometer piston skirt and the outside diameter Do micrometer stop screw to the locking plate position, and then dial indicator card installed and well well inserted under the initial installation of the amount of cards, directly into the cylinder corresponding cylinder kit, adjust the volume of the cylinder rod out in table inserted length, so that small hands dial indicator cell has about 1 volume of pre-press and lock locking rod inserted mother, at the same time, large dial indicator dial to adjust zero, the last cylinder to adjust the volume of good form under test card inserted rods and do at Anvil micrometer and measured the rod between the big hands dial indicator at this time than the "zero" high value is the piston and cylinder liner with the space.

3先直接用千分尺测量活塞裙部的外径并将干分尺止动螺钉扳转到锁紧位置，再将卡装好百分表和初步安装好插杆的量缸表直接卡入对应气缸套内，调整量缸表插杆的伸出长度，使百分表的小表针有1格左右的预压量并锁紧插杆锁母，同时将百分表的大表盘调整到零，最后将调整好的量缸表的测杆和插杆卡在干分尺的砧座和测杆之间，此时百分表大表针比&零&高的数值即为活塞和气缸套的配合间隙。

The first direct measurement with micrometer diameter piston skirt, and then dial indicator card installed and the initial installation of the amount of good cylinder rod inserted card table micrometer mounted on the anvil between the seat and the measuring bar, adjust the volume of cylinder table Interpolation of the extended length of rod, when the dial indicator has small hands around 1.5-2 cell volume preloading lock locking rod inserted mother, and a large dial indicator to zero adjust the final stretch to the volume of cylinder table into the Cylinder Sleeve, large dial indicator hands than "zero" low value (considering the small hands reading) is the piston and cylinder liner with the space.

2先直接用千分尺测量活塞裙部的外径，然后将卡装好百分表和初步安装好插杆的量缸表卡装在千分尺的砧座和测杆之间，调整量缸表插杆的伸出长度，当百分表的小表针有1.5-2格左右的预压量时锁紧插杆锁母，并将百分表的大表盘调整到零，最后将量缸表伸入气缸套内，百分表大表针比&零&低的数值即为活塞和气缸套的配合间隙。

The effects of port injected n-heptane equivalence ratio and iso-octane direct injection timing are investigated experimentally and numerically. The results indicate that the combustion mode of iso-octane is dependant on the iso-octane direct injection timing corresponding to the stage of n-heptane HCCI combustion. In case of direct injection before the low temperature reaction of n-heptane, premixed combustion of the iso-octane occurs. In case of direct injection at the NTC period or the initial high temperature reaction stage of n-heptane, the iso-octane mainly undergoes premixed combustion.

进一步采用进气道预喷正庚烷，缸内直喷异辛烷，在没有火花点火和热EGR的辅助下利用预喷正庚烷HCCI燃烧产生活化热氛围的热作用和化学作用引燃缸内直喷高辛烷值燃料异辛烷，系统研究了不同预喷正庚烷当量比和缸内直喷时刻对直喷异辛烷燃烧模式、发动机效率和排放的影响，并用三维CFD耦合化学反应动力学对其燃烧过程进行数值模拟。

"The engine uses two fired four-stroke cylinders under high pressure, which alternately exhaust into a low-pressure central expansion cylinder, which, in a fifth stroke, provides a further expansion process on the exhaust gases."

高低压指的是工作流体操作的压力，不是压缩比，中缸只有提供&膨胀&行程，并没有压缩点火燃烧等，因为这是汽油引擎，燃烧在小缸点火爆炸完的瞬间就结束了，排气进到中缸只是在继续减压膨胀，并没有做其他事

Companies belonging to Wuhu Wantong Automobile Parts Co., Ltd., is a professional engaged in auto parts such as clutch wheel cylinder, clutch master cylinder, brake wheel cylinder, brake cylinder total, chassis stampings and spinning pulley and many other steel products production and sales workers General of Trade and integration company, with self-import and export rights, self-and agent all kinds of products and technology import and export business.

公司隶属于芜湖万通汽车部件有限公司，是一家专业从事汽车配件如离合器分泵、离合器主缸、制动轮缸，制动总缸，底盘冲压件以及钢板旋压皮带轮等诸多产品生产销售的工贸一体化的综合性公司，拥有自营进出口权，自营和代理各类产品和技术的进出口业务。

And the results were compared with that in the composite hearth of semi-graphite self-baking carbon brick—ceramic brickwork. Some types of feedback information come from some practical and simulant measure temperature points to different hearth shapes made by erosion were analyzed. Some reasonable situations should be placed measurers were studied and advanced.

模拟计算了鞍钢7号高炉炉缸炉底在不同侵蚀形态下的温度场分布，并与几种的典型长寿结构炉缸相对比，分析了炉缸耐火材料层内各实际测温点与假设测温点对不同侵蚀形态反应，并提出了测温点合理的安放位置。

Cited Pistons pull vent valve 10-valve piston cited the role of pulling out are seized cylinder piston rod, when its mild in China emerged after the main hydraulic cylinder rod cavity and there is no cavity under the pressure dropped, so that the main hydraulic cylinder in motion the process of increasing resistance to the main pump to increase the load, resulting in engine speed when pumping declining situation.

3活塞引拔阀内泄活塞引拔阀10的作用是拉出检缸活塞杆，当其出现轻度内泄后，主液压缸无杆腔和有杆腔的压差下降，使主液压缸动作过程中阻力增加，使主泵负荷加大，导致泵送时出现发动机转速下降的现象。

Besides road condition is well in city, Drill Rig with Automobile Chassis was operated in open country where roadway is bad and geological complexion is of complexity.

分析了油气悬挂缸结构参数和工作参数对油气悬挂缸动态特性的影响规律，研究了油气悬挂缸刚度和阻尼特性的影响因素。

Suspension system must be especially demand because Drill Rig with Automobile Chassis runs particularity as well as work surrounding Drill Rig with Automobile Ch...

提出了油气悬挂缸的试验方法，进行了油气悬挂缸的特性试验，对比试验结果与仿真结果，验证了油气悬挂缸数学模型正确性。

The use of characteristics: 1, can be achieved single-cylinder multi-speed, multi-location, two-cylinder or two-cylinder over a poor campaign, the completion of tracking movement.

使用特点：1、可以实现单缸多段调速、多点定位、两缸或两缸以上进行差补运动，完成曲线轨迹运动。

Chrysanthemum of 10 thousand birthday is lax to edaphic requirement, with the arenaceous qualitative loam with fecund, good drainage had better.

万寿菊对土壤要求不严，以肥沃。排水良好的砂质壤土为好。

He unstepped the mast and furled the sail and tied it.

他拔下桅杆，把帆卷起，系住。