注油

The basis function of the coinjection of Nitrogen and steam is increasing the displacement volume and supply the displacement energy on the basis of Nitrogen, the result of the numerical simulation showed that, after the coinjection of Nitrogen and steam (the optional aqueous Nitrogen ratio was 1: 20～1: 50), the theamal readius increased from 30m to 55m more or less, the recovery ratio increased by 5～10％. The production effect of the high cycles steam stimulation will be improved and the pattern infill will be avoided and the economic results will be improved. 4. The poor result of steamflood is another problem. On the basis of the analysis of the foamer mechanism in the propayation, movement and stabilization, this paper showed that the main meachanism of the increasing recovery of the Nitrogen foam and steamflood was the increasing displacement factor and oil displacement efficiency.

三针对蒸汽吞吐加热半径有限（一般30m左右）而蒸汽吞吐轮次已高达5轮以上的具体情况，将氮气与蒸汽混合（套管环空中注氮气，油管中注蒸汽）进行吞吐可增加加热半径1～2倍以上；在对原油流变性研究基础上，对氮气蒸汽原油体系状态进行了分析，指出了氮气在油藏中基本上是以气相方式存在；热氮混合吞吐的基本作用为扩大波及体积和提供驱油能量；在此基础上所进行的热氮混注数值模拟研究表明：蒸汽中加入氮气后（最佳汽氮比为1：20～1：50），加热半径从30m增至55m左右，采收率可提高5～10％以上，大大改善了高轮次蒸汽吞吐的生产效果，可避免大规模井网加密，提高了经济效益。

Through the trial regression to the ratio of unit injection well control area,unit well control area and injection-production well number ratio and shirr formula and unit injection well volume rate of change increasing with unit injection well control area decreasing,then Waterflooding reservoir macroscopica well spacing density formula c.

油藏工程理论及现场实践均表明，注水开发低渗油藏其注水方式和注采井数比对注水波及体积及水驱采收率有较大影响，通过对注水井水驱控制面积、单井控制面积与注采井数比进行了试探性回归分析，再结合谢尔卡乔夫公式，推导出了水驱采收率、驱油效率、井网指数、注采井数比与井网密度的关系式，从而建立了水驱油藏宏观井网密度公式。

I have sun and moon for my outward use, and for inward use too; and into the bargain I have stearine candles, train oil and lamps, and tallow candles.

太阳和月亮照在我的外面，也照着我的里面，我还有混合蜡烛（注：原文是stearinlys，即用兽油和蜡油混合做成的蜡烛。）鲸油烛和牛油烛。

A series of profile numerical simulation are based on the datas of core flooding experiment, including the homogeneous profile positive rhythm section, the rhythm section, interlining profile, interlayer heterogeneity section, intraformational heterogeneity of reservoir section, the actual reservoir simulation. The the section of displacement mechanism of core flow method and the datas of core flooding experiments take into account, the EOR scheme of later stage is CO2 preslug followed by the N2 slug flooding, at last is the waterflooding or depletion type of drive..

为了进一步分析注CO2／N2段塞驱对扫油效率的影响，在岩芯驱替实验的基础上对N2推进CO2段塞驱进行了均质剖面、正韵律剖面、反韵律剖面、隔层剖面、层间非均质剖面、层内非均质剖面、实际油藏剖面的数值模拟研究，通过对比研究，初步认为高11油田在开发中后期提高采收率技术上可选取在适当高的压力条件下，先注前置CO2段塞驱，后续再注N2段塞顶替驱，然后再转注水或衰竭开采的驱替方式。

In the high efficiency oil removal technology aspect, the theory study and application experiment of air sparged liquid-liquid hydrocyclone was carried out, enlightened by the air sparged solid-liquid hydrocyclone. Firstly, the strength and movement of dispersed phase was analyzed in theory, it was proved that the air bubble-oil drop polymer trend to move to the axes of hydrocyclone. Secondly, using CFD method, the characteristics of oil-air-water flow field were studied, including velocity distribution, pressure distribution, turbulent motion energy and its dissipation distribution. The characteristics and separation effect under different air injection methods were simulated. Thirdly, the separation ex-periment of air sparged liquid-liquid hydrocyclone was carried out at Lab. The major structure parameters of the hydrocyclone were optimized, the reasonable air injection method and performance parameters were determined through 4 groups of air injection experiments.

首先，对气携旋流场中分散相粒子的受力及运动进行了理论分析，证明了气泡与油滴形成的聚合体，更易于向轴心运动；其次，应用CFD方法，研究了油-气-水三相流场的速度分布、压力分布、湍动能及其耗散率分布特性，对不同注气方式的流场特性及分离效果进行了数值模拟；第三，开展了气携液-液旋流分离特性室内研究，优化了旋流器的主要结构参数，对四种注气方式的分离效率进行了对比，确定了合理的注气方式和操作参数；最后，在油田现场开展了处理聚驱采出污水工艺试验，确定了工艺运行参数，评价了处理效果。

There will be more spacewalks, the astronauts are just going to have to share grease guns.

以后的太空行走中，宇航员将不得不分享注油枪了。

Do It Yourself House Leveling There are some parts of a Do It Yourself House Leveling pneumatic tool that need proper oiling, or lubrication, while some components of an electrically driven tool need to be kept free of dust and debris.

做自己家的水准还有部分做盖房子需要妥善注油平整气动工具、或润滑，有些部件的电动工具须沾有灰尘和残骸。

No stamp pad, inkpad, can be repeated oiling, continuous stamping, imprinting is not clear deformation; that do cover that is easy to carry and other characteristics.

无需印台、印泥，可反复注油，连续盖印、印迹清晰不变形；即盖即干，方便携带等特色。

Its characteristics:This product works the pressure is big, work the pressure is whole adjustable, 1 time in a row note amount of oil have another, use vivid, operation convenience, is local to add to note lubrication fat to lead an equipments currently, is a hand to move a fat gun currently, single piece grease lubricate device and concentration lubricate the product that the device can\\\'t act for.

其特点：本产品工作压力大，工作压力可调整，一次性连续注油量多，使用灵活，操作方便，是目前国内加注润滑脂的领先设备，是目前个类手动脂枪，单件油脂润滑装置和集中润滑装置不可替代的产品。

A new method of fuel injection was developed during the war.

一种新的注油方法在战争期间发展起来。

Chrysanthemum of 10 thousand birthday is lax to edaphic requirement, with the arenaceous qualitative loam with fecund, good drainage had better.

万寿菊对土壤要求不严，以肥沃。排水良好的砂质壤土为好。

He unstepped the mast and furled the sail and tied it.

他拔下桅杆，把帆卷起，系住。