接头

The quantity for test specified in Table 10 is the total quantity of rotating welding joint and fixed welding joint.

表 10 中规定的检测数量是不分转动焊接接头或固定焊接接头。

It avoids mud leakage and solves the problem of imprecise drilling direction control induced by rotating joint.

改进后的旋转接头在施工中发挥了更好的作用，既避免了泥浆跑漏，也解决了因旋转接头带来的控向不精确问题。

The behavior of post-tensioned steel beam-to-CFT column connections with energy dissipating bars has been investigated analytically and experimentally. Experimental results demonstrated that the connections possess self-centering response, gap opening and closing at the beam-to-column interface, energy dissipation characteristics, and no inelastic or residual deformation. Moreover analytical predictions correlated well with the experimental results.

以理论分析与试验研究预力钢梁接CFT柱接头含消能钢棒之行为，结果显示含消能钢棒预力梁柱接头确实具有自我恢复能力、梁柱接合面缝隙会开启、有消能效果的特性及梁柱没有非弹性行为及残留变形发生；且理论模拟分析能准确预测其行为。

The behavior of post-tensioned steel beam-to-CFT column connections with energy dissipating bars has been investigated analytically and experimentally. Experimental results demonstrated that the connections possess self-centering capability, gap opening and closing at the beam-to-column interface, energy dissipation characteristics, and no inelastic or residual deformation. Moreover, analytical predictions correlated well with the experimental results.

以理论分析与试验研究预力钢梁接CFT柱接头含消能钢棒之行为，结果显示含消能钢棒预力梁柱接头确实具有自我恢复原形之能力、梁柱接合面缝隙会开启与闭合、消能的特性及梁柱无非弹性行为及残留变形；理论模拟分析亦能准确预测其反覆行为。

The results indicate that the welding temperature is the most important factor for diffusion welding of composite. When the welding temperature range is between solidus and liquidus, the peak joint strength can reach 170 MPa.

指出焊接温度是复合材料扩散焊接最重要的工艺参数，焊接温度介于基体合金固相线与液相线之间，接头强度最高值可达到170 MPa；接合界面的氧化膜阻碍基体原子的扩散，是复合材料接头强度下降的原因之一。

The structural model of a beam with bending-resistant spring hinge is established for the natural vibration analysis of prefabricated highway steel bridge s.

引入抗弯弹簧铰模拟结构接头传递弹性弯矩的特性，建立了用于装配式公路钢桥竖向自由振动分析的带抗弯弹簧铰梁模型；利用有限元程序ANSYS对接头进行数值仿真，得到了抗弯弹簧铰刚度。

Ford Motor Company successfully developed the Spring Lock Coupling in March 1992, and widely apply to many product lines. Owing to the fully support from Ford Taiwan, Jia Yang Company also developed the SLC in December 1996. And had been certificated and authorized to produce by Ford. In Taiwan, there are two types, Mondeo and Escape, adopting SLC in design.

福特汽车公司于1992/03/10研发出新式快速接头，并广大应用于所生产之车种中，加扬公司亦于1996年12月得到台湾福特公司的支持顺利开发出此快速接头，并获得福特原厂验证通过并授权制造，于台湾方面的实绩有 Mondeo， Escape(U204)等车系。

It approach the effect of welding parameter to superelevation carbon steel （1.31%C ）/ 45 steel welding.

并结合超高碳钢（1.31%C ）/45钢接头组织简单分析了接头的形成机理和过程。

The effects of mechanical heterogeneity of weldment on the fracture toughness of base metal near weld metal zone are investigated carefully in the paper.

另外本文还详细研究了焊接接头的力学性能不均匀性对焊接接头断裂韧性的影响。

The ladder-shaped public connection of thrash pipe union is welded with exit port of wessel or paste pot,or the ladder-shaped public connection is weldde with steel tube port with relevant diameter.

安装1、锤击由壬的梯形公接头与容器或泥浆出口孔相焊接，或将梯形公接头焊接于相应直径的钢管端口上。

Chrysanthemum of 10 thousand birthday is lax to edaphic requirement, with the arenaceous qualitative loam with fecund, good drainage had better.

万寿菊对土壤要求不严，以肥沃。排水良好的砂质壤土为好。

He unstepped the mast and furled the sail and tied it.

他拔下桅杆，把帆卷起，系住。