查询词典 work over

Belonging to their regular work and the terms of reference of the work may not be passing each other, prevarication, not turned over to the contradictions, it is necessary to pro-active, timely, quality completion of tasks according to work in a creative manner.

属于本职的常规工作和职权范围内的工作，不得相互扯皮、推诿，不上交矛盾，要积极主动，按时、按质完成任务，创造性地开展工作。

That policy change means more students are now eligible to work while they study, the number of hours students can work each week during term time has increased from 15 to 20 and more students are entitled to work full-time over the summer holidays, Ms Tomlinson said.

这些政策意味着学生能够在他们学习期间打工。在学期之中，每周打工的时间从15个小时增加到了20个小时，同时也有更多的学生能够获得在暑期做全职工作的机会，Tomlinson 女士说。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

There are some that are very apparent early on there is quality written all over this we know how we're going to work with it, and there are a few of them you just have to work harder with you know the old tilling/hause statement that some of them you just have to beat enough life into them to make them hold their heads up to polite society, so they're all different, some holes are blessed from the beginning where others are a work in progress.

有些球道已经很明显的在那里了，我们知道怎么去与其合作；有些个别球道我们必须要花些精力去将其呈现出来，因此他们都是很特别的。有些是上天赐予的，有些是要将其一步步做出来的。

The results were showed as following:The work intensity of trunk muscles activities was different in forestry work conditions; work intensity of Erector spinae were the maximum,approaching over 30%Maximum Voluntary Contraction,and EMG amplitudes of Rectus abdominis and Oblique external abdominis were 10%MVC.

研究结果如下：在不同作业工况中，躯干不同肌肉的工作强度存在差异，背部竖脊肌工作强度为最大，均在最大用力的30%左右，其次为腹直肌与腹外斜肌均在最大用力的10%左右。

As part of the study of social administration of Nanjing in the Republic of China, the thesis consists of 7 chapters: Chapter one explains the basic concepts of social administration and the development of modernization of Nanjing before 1927. It stresses the importance of social administration in city development through the depiction of social characteristics and problems of Nanjing. Chapter 2 introduced the theory of social administration of the Republic of China, under which the municipal institutions are structured. It focuses on the social theory of Sun Yat-sen and correlative comments of Jiang Kai-shi, which reflect the theoretic level and subjective intention of social reform of the Republic of China. Chapter 3 discusses the local autonomy of Nanjing of the Republic of China. The origin of democratic local autonomy theory and its influence over social administration are expatriated. The advantages and disadvantages of local autonomy are analyzed in detail. Chapter 4 focuses its discussion upon social rescue work, an important part of social administration, with general description of social rescue work in Nanjing and concludes the characteristics of social rescue work in the transition from the traditional to the modern society. Focusing on the prominent problem of the large flows and inflation of population of Nanjing, chapter 5 discusses the population and population management of Nanjing and outlines the population situation through analysis of the population problem, management methods and the current situation. Chapter 6 describes the unprecedentedly active citizen organizations and parties. The transform and changes of these organizations occurring under the new circumstances and their functions in social administration are analyzed to reveal the interactive function between government and social organizations in social administration. Chapter 7, the epilogue, makes theoretic evaluation of the characteristics of social administration and its revelation to the current society of Nanjing, hoping this research serves as a reference to the current time.

本文是民国南京社会管理研究的一个部分，由七个章节组成：第一章介绍了社会管理的基本概念和1927年以前南京社会近代化的变迁过程，通过对南京社会特点和社会问题的描述，阐明了社会管理在城市发展中的重要作用；第二章介绍了民国社会管理思想的基本内容和在此指导下的南京市政府有关机构的设置，着重阐述了孙中山的社会管理思想和蒋介石的有关论述，反映了国民政府的社会管理的认识水平及其实行社会改造的主观意图；第三章专题讨论了民国南京地方自治，对具有近代民主意义的地方自治思想的由来及其社会管理意义进行了阐述，具体分析了南京推行地方自治的利弊得失；第四章将社会救济事业作为社会管理的一项重要内容进行了讨论，描述了南京社会救济事业的基本概况并对从传统向近代过渡社会救济事业的若干特点进行了总结；第五章针对南京城市人口的大量流动和急剧膨胀这一突出的社会问题，集中讨论了南京的人口与人口管理，通过对南京人口问题、管理手段以及人口状况的分析，展示了南京人口构成的基本面貌；第六章描述了南京空前活跃的市民组织和社会团体，着意反映这些社会组织在新的条件下的转型和变化，分析其在社会管理中所发挥的作用，企望由此揭示政府与社会组织在社会管理中的互动作用；第七章为结语，对南京社会管理的特点及其对现实的启示进行了理论评价，力求本研究更能具有现实借鉴意义。

I finished my school and decided to go to the university...now i understand that university is not useful and this is just spending my money not more...before i entered the university i lived with all my family:mother,father,me and sister...even in another flat,separate to our lived my grandfather and grandmother...then granpa died...i was going to 5-th class at school...when i entered the university i moved to another city and now lived alone...sometimes i visit them...now i'm going to a distance learning at my university and will travel and work...my work is connected with internet technologies,so i can work all over the worldin every country which i want...now i'm earning good money,even more than all my parents and feel not happy...because,Pic Top,i'm alone...this is really bad feelling...who is nanna?

我完成高中之后决定上大学。。。现在我明白了其实大学并不是那么的有用，对我来说除了花钱没有别的了。。在我进入大学之前，我一直与我整个家庭住在一起：我的父母和姐姐。。。甚至不远的另一间公寓里还住着我的爷爷奶奶。。之后爷爷去世了。。我当时在学校里即将要上第五节课。。有时我会看望他们。。而现在我在离家有一些距离的大学校园里读书，并且还要去旅游和工作。。我的工作与互联网技术有关。这使我能够走访全世界去工作，到每一个我想要去的国度。。现在我的收入不菲，甚至比我父母赚的加起来还要多，但我感觉不到快乐。。。因为。。Pic Top，我很孤独。。这种感觉糟糕透了。。谁是nanna奶奶）？

Our timely request, to determine goal: cut out small children at work on the basis of the work will be described in one sentence; shift over a period of continuity of care be able to talk about the language works; taipans children can play based on works of imagination, a complete description of the work.

我们及时提出要求，确定目标：小班幼儿在剪出作品的基础上，会用一句话讲述作品；中班幼儿能够用一段连贯的语言讲述作品；大班幼儿能够根据作品发挥想象，完整地讲述作品。

Main work follows:(1) In the first part of this paper, a historical development of the number theory before Gauss is reviewed.Based on the systematic analysis of Gauss"s work in science and mathematics, inquiry into the mathematical background that Disquisitiones Arithmeticae appeals and Gauss"s congruent theory;(2) The development process of Fermat"s little theorem and its important function in the compositeness test is elaborated through original literature.we think that the first three section of Disquisitiones Arithmeticae is a summary and development for ancestors" work about Fermat"s little theorem,show that Fermat"s little theorem played an important role in the elementary number theory;(3) With the two main sources of the quadratic reciprocity law, investigating Fermat,Euler,Lagrange,Legendre, until the related work of Gauss,the way to realize the laws huge push to the development of algebraic number theory in 19 centuries.

本文主要做了以下工作：(1)首先回顾了高斯之前的数论研究状况，在系统分析高斯的科学与数学成就的基础上，探讨了《算术研究》出现的数学背景和高斯的同余理论；(2)通过对原始文献的系统解读，深入分析了费马小定理发现发展的历程以及在素性检验中的重要作用，指出《算术研究》前三节是高斯在总结并发展了前人对该定理研究的基础上形成的，并揭示了费马小定理在初等数论定理证明中的核心地位；(3)以二次互反律的两个主要来源为线索，详细考察了费马，欧拉，拉格朗目，勒让德，直到高斯的相关工作，揭示了该定律对十九世纪数论发展的巨大推动作用。

It has to be computed by the host for the actual clock rate.

主控制器可以用来计算实际的时钟速率。

Let's see what you got.

让我看看你的东西