查询词典 vanadium oxide

In the course of selecting oxide additives material in the nickel-ferric spinel based inert anode, both the solubility in the cryolite molted salt of oxide additives and the whole thermodynamics action in electrolyte of oxide additives are discussed in this article, thus to have a comparatively reasonable selection of the nickel-ferric spinel based inert anode material.

在选择镍铁尖晶石基惰性阳极材料氧化物添加剂过程中，不仅探讨了氧化物添加剂在冰晶石熔盐中的溶解度，而且还探讨了氧化物添加剂在电解液中的整个热力学行为，从而对镍铁尖晶石基惰性阳极材料做出了较为合理的选择。

The coated article includes a glass substrate, a coating of an antimony doped tin oxide deposited on and adhering to the glass substrate and a coating of fluorine doped tin oxide deposited on and adhering to the surface of the coating of antimony doped tin oxide.

该涂敷制品包括玻璃底板、沉积和附着于该玻璃底板的锑掺杂的氧化锡涂层和沉积和附着于该锑掺杂的氧化锡涂层表面上的氟掺杂的氧化锡涂层。

In ZnO varistors with antimony oxide, zinc antimony spinel produced during sintering process results a higher non-linearity and stability. The non ohmic property can also be enhanced by adding cobalt oxide or magnate oxide, but their effects are different, Co is more effective compared with Mn.

材料中添加Sb〓O〓时，烧结过程中生成的〓尖晶石相大大提高了材料的非线性和工作稳定性，Co〓O〓和MnO〓的加入有效增强了压敏电阻的非线性特性，而Co〓增强非线性特性的效果则更加显著。

This paper describes the process for producing commercial beryllium oxide from non-beryl beryllium ore,especially the method for producing commercial beryllium oxide from high-fluorine beryllium ore and presents production situation of Shuikoushan commercial beryllium oxide.

叙述了非绿柱石铍矿生产工业氧化铍的工艺，特别是高氟铍矿生产工业氧化铍的方法，介绍了水口山工业氧化铍的生产状况。

Additionally, the nanodots were measured by EFM, and the experiment indicated that the charge of chromium oxide is negative. As the height of chromium oxide increases , negative charge of chromium oxide increases.

此外，我们用静电力显微镜观察铬氧化点的静电荷分布情形，发现在铬氧化点内的静电荷为负电荷，并且随著铬氧化点高度的增加而变多。

The outer layer consists of iron oxide and the inner layer chromium and iron oxide. The central point at hindering effect of the surface on the permeatin of hydrogen isotopes is the reduction of this oxide layer.

不锈钢表面对氢同位素透过的阻碍作用实质是该氧化层所发生的还原反应；其还原反应的程度主要依赖于与氢同位素作用的温度条件，并能够从功函数的变化中明显地反映出来。

The effect of the tool composition on the friction and wear behavior was investigated,and the morphologies of the rake face and rear face of the tool cutting the steel in air and nitrogen were observed on a scanning electron microscope. It was found that the Al_2O_3/TiB_2 tool was dominated by adhesive and abrasive wear in low speed dry cutting; while in high speed dry cutting,the tool was characterized by oxidation wear. An oxide layer of TiO_2 was formed by way of the oxidation of the reinforcing agent TiB_2 at a very much high cutting temperature, which contributed to greatly reducing the friction coefficient and increasing the antiwear life of the tool.Such a friction-reducing and antiwear behavior of the oxide layer was enhanced with increasing content of TiB_2 in the tool composite. However,the tool showed a relatively poorer wear resistance in N_2 than in air, because N_2 acted to retard the oxidation of the TiB_2 and the formation of the oxide layer on the tool rake face.

结果表明：低速干切削时，Al2O3/TiB2陶瓷刀具的磨损机制主要表现为粘着磨损和磨料磨损；而在高速干切削时，刀具的磨损机制主要表现为氧化磨损，刀具表面经由氧化反应生成具有润滑作用的反应膜而起到固体润滑作用，从而使刀具的耐磨性能提高，随着TiB2含量和切削速度的增加，反应膜的减摩抗磨作用增强；而在切削区通入氮气时，由于刀具表面氧化膜形成受阻，刀具的抗磨能力有所降低。

This paper introduces not only deposition of tin oxide thin film, but also doping silica oxide in the film to control the grain size of tin oxide, and improve the sensitivity of the sensor.

论文中除了沈积二氧化锡薄膜外，亦於薄膜内掺杂二氧化矽，藉此以抑制二氧化锡晶粒成长、提升其灵敏度。

The cathode is generally one of three materials: a layered oxide, such as lithium cobalt oxide, one based on a polyanion, such as lithium iron phosphate, or a spinel, such as lithium manganese oxide, although materials such as TiS2 were originally used.

阴极通常是以下三类材料：一种层氧化物，例如钴酸锂、一种阴离子聚合物，例如磷酸锂铁，或者是一种尖晶石，例如锰酸锂，象例如二硫化钛之类材料曾经是最初使用的材料。

The differences of the micro structure and properities of the bulk sinters, between the fabrication methed of powder metallurgy and reactive synthesis for silver tin oxide composite, are studied in prensent thesis. With the increase of the tin oxide content in silver matix, the electric conductivity of the composite tended to decreace. While in the same tin oxide content, the electric conductivty of the composite fabricated by reactive synthesisis better than that by powder metallurgy. One of the reasons is that the regular net structure existing in former composite.

研究了两种方法即粉末冶金法和反应合成法制备的银氧化锡复合材料烧结坯在组织上的区别和性能上的差异，两种方法制备的银氧化锡复合材料，随着氧化锡含量的升高，材料导电性均呈下降趋势，而相同成分的材料，反应合成法制备的银氧化锡复合材料的烧结坯的导电性要优于粉末冶金法，有规则的网络状组织结构是反应合成法制备的烧结坯导电性好的原因之一。

Pradeep Indulkar, a senior official at the Maharashtra state Home Ministry say 101 human were killed and 287 injured.

马哈拉施特拉邦内政部高级官员Pradeep Indulkar称，有101人在冲突中丧生，287人受伤。

Mark Frei, a senior vice president of West, says 80% of West's homeagents have some college education, compared with 30% of those whowork in office-based call centers.

Frei说，该公司80%在家办公的人员都拥有本科学位，而在公司电话中心工作的人中只有30%拥有本科学位。