查询词典 tin coating

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

The basic concepts of coatings function, composition, classification. Various coatings: drying oil, rosin and lacquer, alkyd resin and polyester coating, amino resin coating, acrylic acid resin coating, epoxy resin coating, polyurethane coating, elementary organic resin coating. Several new coatings: high solid-constituent coating, water soluble coating, powder coating, light-sensitive coating, anti-corrosion coating, flame-retarded coating, anti-contamination coating, color changing coating, conductive coating and magnetic coating, aeroplane and aerospace dope.

涂料的基本概念：涂料的功能、基本组成、分类；各种涂料的制造及应用：干性油、松香与大漆，醇酸树脂与聚酯涂料，氨基树脂涂料，丙烯酸树脂涂料，环氧树脂涂料，聚氨酯涂料，元素有机树脂涂料；几种新型涂料简介：高固体分涂料，水性涂料，粉末涂料，光敏涂料，防腐蚀涂料，防火涂料，防污涂料，变色涂料，导电涂料和磁性涂料，航空航天特种涂料。

The speed of produce tin,the time return tin,the interval time of produce tin can be adjusted steady and with tin back adjustable features,which can reduce the waste of welding 3 the mode of produce tin mode: automatic and manual produc tin for the selection of tin (produce tin manually can match a tin foot switch or manual switch out of tin), and the number of the tin can be set 4 all of the settings using DIP switch settings, easy to operate; 5 anti-static design can avoid sensitive electronic components damaged due to static electricity and 6 optional universal bracket solder 7 simple and easy welding to reduce the welding welding achieve the desired effect of waste, improve efficiency significantly.

产品说明Product description；1）采用步进电机，出锡精确且可灵活控制。2出锡速度、出锡量、回锡时间，出锡间隔时间均可调节且稳定，且设有可调的回锡功能，以减少焊接的浪费3出锡模式：全自动出锡与手动出锡可供选择（手动出锡可选配脚踏出锡开关或手动出锡开关），且出锡次数可设置4所有设置采用拨码式开关设置，方便操作；5防静电设计，能避免敏感电子零件因静电而受损坏6可选装万能焊锡支架7焊接简单容易、减少焊接的浪费达到理想焊接效果，工作效率显著提高。

Zhuhai fish woman pure tin craft Co., Ltd. to fish the artistic image of a female-oriented, professional production of pure tin tea caddy, pure tin cup, wine glass pure tin, pure tin teapot, cup pure tin, pure tin vases, pure tin pen, pure tin embossed murals, pure tin medals, awards, etc.......

珠海渔女纯锡工艺有限公司以渔女为主创艺术形象，专业生产纯锡茶叶罐、纯锡酒壶、纯锡酒杯、纯锡茶壶、纯锡茶杯、纯锡花瓶、纯锡笔筒、纯锡浮雕壁画、纯锡奖牌、奖盘等。。。。。。

Ordinary solder materials, lead-free solder, the lead-free solder wire, solder paste, solder, the solder wire , high temperature tin, the low-temperature tin-line, lead-free tin-silver, the lead-free tin-silver line, low-temperature lead-free tin line, welding aluminum tin, the tin-aluminum welding wire, welding wire stainless steel tin, aluminum welding flux not stainless steel flux, environmental flux, welding of stainless steel, nickel, special aluminum solder, aluminum flux, aluminum brazing soft agent, paint remover, paint stripping powder (high-temperature paint stripping enameled wire a few seconds), copper aluminum welding, aluminum and aluminum welding, wire flux of new environmental protection (smoke-free and tasteless, non-volatile non-flammable) peaks of water-soluble flux, no-clean rosin flux, no-clean flux, thinners, cleaning agents, plate washer water , clean water machine, special purposes, such as water-soluble flux.

普通焊锡材料，无铅焊锡条、无铅焊锡线、焊锡膏，焊锡条、焊锡线、高温锡条、低温锡线、无铅含银锡条、无铅含银锡线、无铅低温锡线、焊铝锡条，焊铝锡线、焊不绣钢锡线、焊铝助焊剂、不绣钢助焊剂、环保助焊剂、焊不锈钢、镍、铝特种焊料、铝助焊剂、铝的软钎剂、脱漆剂、脱漆粉、铝铜焊接、铝与铝焊接、环保新型线材助焊剂(无烟无味、不挥发不易燃)水溶性波峰助焊剂、免清洗松香助焊剂、免清洗助焊剂、稀释剂、清洗剂、洗板水、抹机水、特殊用途水溶性助焊剂等。

The results showed that the TiN andN films are polycrystalline phase. The properties and structure of TiN films are mainly determined by the N2 mass flow rate, and as the N2 mass flow rate increases, the structure of the TiN films transforms to f.c.c. type leading to better the properties of films. The presence of negative bias voltage can optimize the grain of TiN films, lower the defect proportion and denser the films, which improves the hardness of films. The TiN films conform to the free carrier absorption mechanism and there are many of free electrons with lower N content in TiN films. With the increase of N content, the quantity of free electrons and reflectivity of films decrease, and the plasma frequence shifts to the lower energy, which leads to the regular change of colors of films from silver, yellowy, golden to yellow-red, meanwhile the lightness of films decreases. The goldenN film consists of TiN and ZrN phase, but belongs to a sigle f.c.c. structure with (111) preferred orientation. The Zr-doping dosen't change the position of the valance band, conduction band and forbidden band ofN film, but leads to the presence of new energy levels, which is the reason thatN film remains golden. The transparent hard films with good corrosion resistance and high hardness have been prepared and the further reseachs showed that the grain size of those films is by far smaller than the wave length and the width of forbidden band of those films is very broad, is the reasons that those films are transparent.

研究表明：氮化钛和N 薄膜为多晶态，氮流量决定了氮化钛薄膜的结构和性能，增加氮流量能使氮化钛薄膜的结构向面心立方结构转变，从而得到性能良好的氮化钛薄膜；施加负偏压能优化氮化钛晶粒和减少薄膜中的缺陷，使膜层变得更致密，从而提高薄膜硬度；氮化钛主要遵循自由载流子光吸收，氮含量较少时薄膜中的自由电子数目较多，随着氮含量的增加，薄膜中的自由电子数目不断减少，反射率逐渐降低，等离子体频率向低能端移动，从而使薄膜颜色出现规律变化，由金属色银白色到淡黄、金黄再到红黄，并且薄膜亮度呈下降趋势；金黄色的N 薄膜中存在TiN 和ZrN 的分离相，但其为单一的面心立方结构并具有(111)面择优取向；相对于TiN 薄膜，Zr 掺杂后，并没有使薄膜的导带、价带和禁带发生变化，只是在TiN 禁带内增加了新能级，这也正是掺杂Zr 后，薄膜仍

The company's main products: color detection instruments: Glossiness Miriam, Miriam color spectrophotometry, standard light source for color light box, transmissioní°Miriam, Miriam orange peel, fresh young tester; surface coating physical properties testing instruments: Coating thickness, wet film thickness, temperature tracker, surface humidity instrument, dewpoint meter, roughness instrument, electric spark pinhole leak detectors; Detect mechanical properties of surface coating equipment: zoned grid, and pencil hardness tester , impact tester, hardness testing sticks, Latvia Law / hydraulic adhesion tester, abrasion tester, cylinder / cone bending tester, cups sudden device, surface tension instruments, scratch pen, indentation hardness tester, etc.; paint coating equipment dedicated category: fineness board, drying time recorder, wet adhesion tester, paint ohmmeter, PH, the coating device, mixer, bead mill, mixer, spray gun, putty detector Miriam, white tester, iron cobalt colorimeter, moisture titrator; viscosity-type equipment: Viscosity Cup, density cup, bubble viscosity tube viscometer, infiltration cup rheometer, viscosity units conversion meter; laboratory standard consumables: Mitsubishi pencil tests, 3M adhesive tape test, RCA tape, rubber, the hiding power test paper for color tubes, microscopes dedicated LED ring light source, transfer ink knife and ink scraper, brush, Color Card, gray cards, zirconia beads, glass beads, pieces of cement mortar, the standard of fly ash, the standard viscosity fluid, stopwatch, chemical industry-standard compilation of manuals, paint paint testing manual; test standard Material: tin plate, steel plate, aluminum sheet, asbestos-cement pressure plate, Eterpan, glass, maple panels, MDF, copper film, polyester film, copper; measuring meter and optical instruments: digital calipers, micrometer, dial gauge a high scale, depth gauge, thickness gauge, diameter gauge, gauge block, magnifiers, microscopes, projectors, video measuring instrument; environmental test equipment: oven, constant temperature and humidity box, hot and cold circulating water bath, salt spray test chamber, high temperature resistance furnace, fluorescent UV aging chamber, xenon lamp aging chamber; electronics equipment: infrared thermometer, multimeter, clamp sheet, thermal imager, temperature and humidity meter; anti-static instruments: static tester, surface resistivity device, flat-panel monitor, anti-static footwear tester, wrist strap tester, body Tester; other types of instruments and equipment: torque tester, temperature and humidity recorder, push pull, the vibrometer, speed instrument, analytical balance, industrial Scale Units, dust particle counter, X-ray fluorescence coating thickness measurement and elemental composition analyzer, and so on.

公司主营产品：外观颜色检测仪器：光泽度仪、分光色差仪、标准光源对色灯箱、透射雾影仪、桔皮仪、鲜映性测试仪；表面涂层物理性能检测仪器：涂层测厚仪、湿膜测厚仪、炉温跟踪仪、表面湿度仪、露点仪、粗糙度仪、电火花针孔检漏仪；表面涂层机械性能检测仪器设备：划格器、铅笔硬度计、冲击试验仪、硬度试验棒、拉脱法/液压式附着力试验仪、耐磨耗试验机、圆柱/圆锥弯曲试验仪、杯突仪、表面张力仪、划痕笔、压痕硬度计等；涂料油漆类专用仪器设备：细度板、干燥时间记录仪、湿附着力耐擦洗试验仪、油漆电阻计、PH计、涂膜器、混合机、珠磨机、搅拌机、喷枪、腻子测定仪仪、白度仪、铁钴比色计、水份滴定仪；粘度类仪器设备：粘度杯、密度杯、气泡粘度管、粘度计、渗透杯、流变仪、粘度单位换算计；实验室标准消耗品：三菱测试铅笔、3M测试胶带、RCA纸带、橡皮条、遮盖力测试纸、对色灯管、显微镜专用LED环型光源、调墨刀、墨铲、狼毫刷、色卡、灰卡、锆珠、玻璃珠、水泥砂浆块、标准粉煤灰、标准粘度液、秒表、化学工业标准汇编手册、涂料油漆测试手册；测试级标准基材：马口铁板、钢板、铝板、石棉水泥加压板、埃特板、玻璃板、枫木面板、中纤板、紫铜片、聚酯膜、铜棒；量具量仪及光学仪器：数显卡尺、千分尺、千分表、高度尺、深度规、厚度规、内径规、量块、放大镜、显微镜、投影仪、影像测量仪；环境测试设备：烘箱、恒温恒湿箱、冷热循环水浴、盐雾试验箱、高温电阻炉、荧光紫外老化试验箱、氙灯老化试验箱；电子类仪器：红外测温仪、万用表、钳形表、热像仪、温湿度仪；防静电仪器：静电测试仪、表面电阻仪、平板监测仪、防静电鞋袜测试仪、手腕带测试仪、人体综合测试仪；其他类仪器设备：扭力测试仪、温湿度记录仪、推拉力计、测振仪、转速仪、分析天平、工业台秤、尘埃粒子计数器、 X-射线荧光涂层测厚和元素成分构成分析仪，等等。

The coated article includes a glass substrate, a coating of an antimony doped tin oxide deposited on and adhering to the glass substrate and a coating of fluorine doped tin oxide deposited on and adhering to the surface of the coating of antimony doped tin oxide.

该涂敷制品包括玻璃底板、沉积和附着于该玻璃底板的锑掺杂的氧化锡涂层和沉积和附着于该锑掺杂的氧化锡涂层表面上的氟掺杂的氧化锡涂层。

It illuminated that the TiN coating enhanced the load bearing capacity, and enlarged the using range of substrate material. MoS2 coating and TiN+ MoS2 composite coating both possessed the good capability for palliating radial fretting damage. The microslip increased in radial fretting when the solid lubrication coating was used on the contact interfaces. More system energy can be absorbed in this process in favor of reducing vibration.

TiN 涂层明显提高了基体材料的承载能力，扩大了其应用范围； MoS2涂层和 TiN+ MoS2复合涂层具有较好的抗径向微动损伤能力；固体润滑涂层增加了径向微动界面的微滑，并可吸收更多的系统能量，有利于系统的减振。

Through above numerical analysis of the TiN coating/substrate system, some typical rules about the fatigue failure are found:(1) the fatigue damage of a coating/substrate system appears first on the interface, then expands along the interface and to the substrate, and finally causes the coatings broken and spalled;(2) under the cyclic loadings of tangential sliding and radial extrusion, the equivalent plastic damage on the interface is mainly generated by the shear stress and the accumulated plastic contributed by the increments of shear stress. Thus the change of the shear stress is the main factor for the contact fatigue damages of coating/substrate system;(3) the frictional coefficient, external loading and coating thickness have some influence on the carrying capacity and contact fatigue life for a coating/substrate system.

通过对TiN涂层／基体系统的数值模拟分析，得到了涂层／基体系统疲劳失效的一些典型规律：(1)、涂层基体的初始损伤首先出现在交界面处，然后沿界面并向基体中扩展，最后导致涂层断裂而发生剥落失效；(2)、在切向滑动和径向挤压循环载荷作用下，交界面处的塑性损伤主要是由剪应力τ产生，塑性累积也是由于△τ的变化引起，说明循环过程中剪应力变化是影响涂层接触疲劳破坏的主要因素；(3)、材料摩擦系数、外界载荷大小以及涂层厚度都对涂层／基体系统的承载能力以及疲劳寿命都有一定影响。

World War II: Battle of Saipan - Americans take Saipan.

1944年的今天，美国在塞班战役中拿下塞班岛。

When the scorner, the rejecter of truth, has become presumptuous; when the routine of work in the various money-making lines is carried on without regard to principle; when the student is eagerly seeking knowledge of everything but his Bible, Christ comes as a thief.{DA 635.3

当讥诮和拒绝真理的人，到了任意妄为时，当追求财利者罔顾按道义经营谋利时，当学人正在兢兢业业地研究各种知识，而单把圣经丢在一边时，基督要像贼一样来临。