查询词典 temperature coefficient

The DLC film deposited at substrate temperature of 100℃ shows the best integrated property with carbon content of sp〓 bonding state up to 40% which is two times more than that in the films prepared by Americans with the same method. Accordingly, the microhardness is up to 30Gpa, and friction coefficient and optical band gap decrease to 0.10 and 1. 76eV respectively. It is found that sp〓C content in DLC films decreases with the increasing substrate temperature in the process of film deposition, especially after 300℃.

当基片温度为100〓C时沉积的DLC薄膜的综合性能最好，此时沉积的DLC薄膜中sp〓C含量最高，达到40％多，是美国学者用同种方法所得结果的2倍；由于薄膜sp〓C的含量高使得其显微硬度达到30GPa，摩擦系数最小为0.10，光学带隙最宽为1.76eV。

With the increase of temperature, the friction coefficient of the composition materials increased and the wear rate of the composition materials decreased.PPTA pulps in the friction materials overcome the shortcoming of asbestos that has high wear rate at high temperature.

结果表明，3种芳纶浆粕增强的摩擦材料都具有优良的摩擦磨损性能，特别是随着温度升高，摩擦系数有较大提高的同时，磨损率明显下降，克服了石棉增强的摩擦材料在较高温度下磨损率较大的缺点。

Hysteresis coefficient decreased both with increasing Al and Mn and decreasing Y at a given temperature and with increasing temperature at a given sample.

在相同的温度下，滞后系数随着Al、Mn浓度的增加而减小，随着Y浓度的增加而增加；对于同一组分合金，滞后系数随着温度的升高而增加。

Hysteresis coefficient decreased both with increasing Al and Mn and decreasing Y at a given temperature and with increasing temperature at a given sample.

在相同的温度下，滞后系数随著Al、Mn浓度的增加而减小，随著Y浓度的增加而增加；对于同一组分合金，滞后系数随著温度的升高而增加。

Is located in foot of Helan Mountain, China's table grape and wine grape of origin protection of one of France's Bordeaux latitude and the same coefficient in the hot water, temperature, temperature, etc. even better than that of Bordeaux; Yongning County farm west Yuquanying Helanshan Weiwei, climate is very suitable for a variety of fresh plant and wine grapes, has Oriental Bordeaux Helanshan Yamashita's name.

地处贺兰山东麓，是我国鲜食葡萄及酿酒葡萄原产保护地之一，纬度和法国的波尔多相同，在水热系数、温度、温差等方面甚至还优于波尔多；永宁县玉泉营农场西靠巍巍贺兰山，气候十分适宜种植各种鲜食和酿酒葡萄，贺兰山下有东方波尔多之美称。

The research results show that the steam inlet pressure and water inlet temperature are the main factors which affect the lifting-pressure performance; the steam injector have the characteristics of self-adaptive outlet pressure and constant outlet flow rate; the theoretical maximum lifting-pressure coefficient calculated could be high as 14 and the experimental value is 3.0, which could be high as 1.5 even if the water inlet temperature is high as 95℃. The noise of steam injector could be induced from 80db to 50db.

研究出该升压技术具有定流量特性、出口压力具有自适应特性，计算得出的理论极限升压能力的升压系数可达14，实验得出的最大升压能力为进口蒸汽压力的3倍，进口水温达到95℃时其升压能力还可达到1.5倍，噪音从目前的80db减少为50db。

The study found that free-stage has no effect on performance, to be end as soon as possible; the pressure and oil-filling time in oil-filled stage are the key, which directly determines the speediness of the starting; slipping-stage decides the comfort of the starting, and the friction coefficient is important for this stage, synchronous engaging-stage don't product slipping loss, and don't impact the jerk of the vehicle, needing to be finished fast. According to control object and evaluate guidelines, the fuzzy control algorithm is developed and different experiments verify the correction of algorithm.5 With the debug of CVT control software, the experiment is finished in two years which includes test bench experiment, 60℃high temperature test in Tulufan of Sinkiang province, 4647 meters high altitude test at Kunlun mountains, as well as the minimum temperature of -32℃test at Heihe.

根据控制目标及评价指标，开发了湿式离合器接合过程模糊控制算法，各类试验证实了算法的有效性。5湿式离合器的起步试验伴随CVT控制软件的调试，历时二年，经过台架试验，新疆吐鲁番环境温度高达60℃的高温标定试验，昆仑山口海拔高度4647米的高原标定试验，以及黑河最低温度为-32℃严寒标定试验，所取得的研究成果对离合器软件开发和标定流程具有很好的借鉴意义和工程应用价值。6自动变速器起步离合器的标定是软件产品开发的核心技术。

Based on space-charge effect,I choose different diode model when diodes have different base doping concentration,analyzing the main factors impacting temperature coefficient of the diode,testing diodes with different angle lap,analysis of the blocked characteristics of diode in high temperature.

快恢复二极管的生产中发现大量的反向耐压呈现负温度系数的管芯，本文从空间电荷效应的角度，对基区掺杂浓度不同的管芯采用不同的二极管模型，分析管芯在高温情况下影响二极管反向耐压主要因素；并且对不同磨角的管芯进行测试，分析对二极管高温阻断特性的影响。

By combining with pyritethermoelectricity coefficient thermometry result (100℃～240℃) and inclusion equal thermometry result(226℃～230℃and 113℃～153℃) it shows that the heated temperature of the black shale series ofNiutitang formation is between 60℃and 250℃, and the max paleotemperature between 200℃and 250℃,which belongs to the middle-lower temperature sedimentary and rock-forming and ore-forming actions inLower Cambrian black shale series in northern Guizhou.

结合前人黄铁矿热电系数法测温(100℃～240℃)和包裹体均一法测温(226℃～230℃和113℃～153℃)，判定牛蹄塘组黑色岩系的受热温度介于60℃～250℃之间，经历的最高古地温估计为200℃～250℃，属中、低温沉积成岩成矿作用，并以低温(200℃以下)沉积成岩成矿作用为主。

In this study, the polyethylene vinyl acetate was bended with carbon black to produce the low temperature response positive temperature coefficient elements.

摘要 本实验用EVA和碳黑混炼制备低温正温度系数材料。

In the chapter 2, the theoretic knowledge about the photosensitive resin and the grinding tools was firstly introduced.

第二章阐述了光固化树脂结合剂磨具的相关理论研究。

Do not use the program's indenting or margin-setting features; these will be added during typesetting.

不要使用缩排，页面边缘设置之类的选项，偶看不大懂。