查询词典 structural

Based on practical demands of regional accident emergency management of major hazard installations, non-structural fuzzy decision method and accident consequence simulation methods are co-method to present safety management administration and related enterprises a multi-criteria decision support method, which is focused on enterprises that might be affected by the potential accident consequence of major hazard installations, for regional accident emergency management of major hazard installations, this method is aimed to optimize the management of emergency resource, promote the performance of safety management system, decrease the fatalities and property loss.

针对目前我国应对重大危险源突发事故的管理和决策主要依赖于相关领导或专家掌握的知识及经验的现状，将非结构化模糊决策方法(Non-structural Fuzzy Decision Method， NSFDM)和事故后果模拟方法相结合，以区域范围内受重大危险源潜在事故影响的企业为决策对象，以减小事故影响范围，降低事故严重程度为目标，建立起重大危险源区域事故应急决策的多准则决策方法，以期帮助安监职能部门优化配置应急救援资源，提高应急响应绩效，减少国家和人民的经济和财产损失。

We extend the framework of Lehr and Wang (2000) to a small open economy and apply the structural VAR technique pioneered by Blanchard and Quah (1989) in order to reexamine the role of "financial intermediation" shocks on business cycles in the four Asian countries: Taiwan, Japan, Korea, and Singapore.

本文将Lehr and Wang（2000）之封闭经济模型延伸为小型开放经济体系，并拟以Blanchard and Quah (1989)之长期结构向量自我回归模型（long-run structural vector autoregressive model），以台湾、日本、韩国、新加坡为研究对象，探讨金融中介冲击对景气循环之影响。

Based on investigating the short and intermittent structural plane, surrounding rockmass of the huge underground powerhouse in Three Gorge has been divided into five statistical similar areas according to its characteristic of rockmass structure by applying structure plane network simulation. Distributed characteristic of structural plane has been studied and based on it mechanics macrocharacteristic has been studied:(1) It is the first time that based on the result of structural plane network simulation rockmass quality of every structure area has been studied with applying blurred information optimum seeking technique and be compared with and RQD method. The result indicated that it has better effect to evaluate rock quality with blurred information optimum seeking technique.(2) It is the first time that the interrelated relationship of the result of in-suit rockmass deformation test and fractal characteristic of structure on test point has been applied to determine rockmass deformation parameter. The question of evaluating deformation parameters of engineering rockmass has been solved.(3) Anisotropy strength parameters have been determined by applying shear zones simulating method. The result indicated that there are different strength parameters in every structural area, after comparing the result of Fast Lagranian Analysis in continua number simulation method with that of method of weighted mean according to continuity. The result indicated that when a suitable reduction coefficient is been considered rockmass strength parameters can be simply and fast determined with method of weighted mean according to continuity where there is not enough test result.(4) Damage characteristic has been studied based on analysis fractal characteristic of structural plane network by applying fractal-damage coupling method. It is the first time that the concept of damage degree has been set up to evaluate rockmass quality according to the biggest principal damage.

通过对短小、断续性结构面统计特征的研究，将地下厂房区划分为五个岩体结构统计均质区，应用结构面网络模拟技术研究了各个岩体结构均质区结构面的发育分布特征，并以此为基础对岩体宏观力学特性进行了深入研究：(1)首次通过在结构面网络模拟计算结果的基础上，应用模糊信息优化技术研究了厂房区各个岩体结构分区的岩体质量并与岩体基本质量指标研究法、岩体质量指标RQD值研究法作了对比，结果表明以结构面网络模拟结果为基础，应用模糊信息优化技术进行岩体质量评价能够取得很好的效果，解决了工程岩体质量的定量评价问题；(2)首次通过对已有的现场大型岩体变形试验结果的分析及相应试验点岩体结构分形特征的研究，建立了结构面分布的分形维数和岩体变形指标间的相关关系，并首次应用这种相关关系根据结构面网络模拟及分形维数计算结果确定了缺少试验结果的地下厂房各工程部位的岩体变形指标而且应用于围岩稳定性计算，解决了工程岩体宏观变形参数的评价问题；(3)应用在结构面模拟网络图上模拟岩体剪切破坏带的方法，得出了岩体在不同方向上的强度参数，结果表明岩体的强度特性与结构面的发育方向和程度有着明显的关系，各个岩体结构均质区具有不同的强度参数；同时还通过应用拉格朗日差分法对岩体强度指标的数值分析并与按连通率加权平均计算法对比表明，按连通率加权平均计算法在考虑合理的折减系数情况下，可以简单快速地对缺少现场大型试验结果的具体工程部位实现岩体强度指标的估计，通过以上研究解决了工程岩体抗剪强度参数的评价问题；(4)通过结构面网络分形维数的研究，应用分形损伤耦合分析方法，研究了厂房区岩体的损伤特征，并首次引入"损伤度"的概念，建立了应用最大主损伤评价岩体质量的指标体系。

On the basis of plan form and crosscutting relationship of the faults, two kinds of tectonic systems were developed in Wu-Xia area, one was strike north-east, and another was strike east-west, the first was developed early and control the structural framework of Wu-Xia area, after that three times longitudinal compress action was happed. According to the intensity of tectonic deformation, The Wu-xia faulted zone from north to south can be divided into the thrust faulted belt, the fault fold belt and the monocline belt. from east to west have three regulatory faults, Wuerhe fault fold belt, Wuxia thrust faulted belt and Xiahong fault fold belt. Base on that 9 secondary structural unit can be divided.Structural accommodation zone and the distribution of reservoir strata have intimate business connection. Usually, Structural accommodation zone was the source zone of arenaceous sediment. The Wu-xia faulted zone have 3 kinds of structural accommodation, concordant approach, concordant overlap and concordant colinearity.

首先研究本区的构造特征，根据断裂的平面形态及相互切割关系，乌夏地区发育两种构造体系：北东向构造体系和近东西向构造体系，前者形成早，控制了该区的构造格局，晚期有3次近南北向挤压作用叠加；乌夏地区南北根据构造变形的强度不同分为冲断带、断褶带、单斜带，东西由于横向调节断层的存在分为乌尔禾断褶区、乌-夏冲断区和夏-红断褶区，进一步划分为九个次级单元；构造调节带与储集层的分布关系密切，通常是大量富砂质沉积的源区，乌夏地区发育三种类型的构造调节带：同向接近型、同向叠覆型和同向共线型。

In reaction-injection moldinga mixture of two or more reactive fluids is forced under high pressure into the mold cavity.Chemical reactions take place in the mold rapidly and the polymer solidifies.Various fibers such as glass,graphite,or boron may also be used to reinforce the materials.Structural foams are also produced by a similar methodusing an inert gasand resin mixture.The product consists of a rigid cellular(closed-cell)structure with a continuous solid skin as muchas 0.080 in.(2mm)in thickness.There are several methods for forming structural foams with density reductions as much as 40% from the solid structure.Because stiffness is proportional to the third power of the thickness of a part,for the same weight of material used,cellular structures are stiffer than solid plastics or metals.

在反应注射成型所夹杂的两个或两个以上的接触过程中，被迫在高压下进入模具cavity.chemical反应发生在模具迅速和聚合物solidifies.various纤维如玻璃，石墨，或硼可能也可以用来加强materials.structural泡沫也产生类似的方法利用惰性气体和树脂mixture.the产品构成的一个硬性蜂窝的结构与连续性固皮肤作为留言Muchas 0.080英寸（ 2毫米），在thickness.there有几种方法，形成结构性的泡沫密度减少了四成之多，从固体structure.because刚度成正比第三力量厚度的一部分，为同样重量的使用材料，蜂窝结构更为严厉的比硬塑料或金属。

One (1) pumps Products: submersible pump, jet pump, drainage pump, sewage pumps for civilian use; end suction pumps, in the open pumps, booster pumps, fire pumps for industrial and commercial; centrifugal pump, diaphragm pump, column Cypriot pump applicable to agriculture; desalination pump, reciprocating pump, axial flow pump for municipal construction; bilge pumps, cooling pumps, sewage pumps, high pressure washing pump, water pump for sea; purification and filtration equipment: FLECK valves for the boiler water softener system, reverse osmosis pretreatment system installations, domestic and commercial water softener system; STRUCTURAL cans resin applied to sand filters, commercial water softener, ion exchange, multi-media filtration, activated carbon filtration; CODELINE Hymenolepis apply to sea water, bitter, salt water desalination projects, power plant boiler supply water treatment industry, chemical industry process water, electronics, semiconductor industry, ultrapure water treatment, metallurgy, light industry, electroplating industry wastewater treatment, food and beverage, health care; swimming pools and water features equipment for spa, swimming pools, large baths and so on.

其中泵类产品：潜水泵、喷射泵、排水泵、污水泵适用于民用；端吸泵、中开泵、增压泵、消防泵适用于工业和商用；离心泵、隔膜泵、柱塞泵适用于农业；脱盐泵、往复泵、轴流泵适用于市政建设；舱底泵、冷却泵、污水泵、高压冲洗泵、饮用水泵适用于海运；净化与过滤设备：FLECK阀门适用于锅炉软水系统、反渗透系统的预处理装置、家用及商用软水系统；STRUCTURAL树脂罐适用于砂滤、商用软水器、离子交换、多介质过滤、活性碳过滤；CODELINE膜壳适用于海水、苦、咸水淡化工程、电厂锅炉补给水工业处理、化工行业工艺用水、电子、半导体行业的超纯水处理、冶金、轻工业、电镀等行业的废水处理、食品饮料、卫生医疗；泳池及水景设备适用于水疗、游泳池、大型浴场等等。

The two-dimensional structural units (such as silicon-oxygen tetrahedral sheet, octahedral sheet), interlayer space are assembled according to the sphere close packing manner, and the close packing layers parallel to {0001}. There are several mechanisms to release the difference in size while the silicon-oxygen tetrahedral sheet and octahedral sheet assemble the TO and TOT-type structural layers. The two types of structural layers with different interlayer space fitted together in six kinds of assembling modes and formed six kinds of crystal layers. The combinatorics analysis of the two-dimensional structural units revealed that there may be 28 kinds of TOT type interstradified minerals in six kinds of polysomatic assembling modes of interatradified structure. The structural layer is symmetrical for octahedron sheet in the structure of interstratified minerals and shows polarity characteristics.

结果表明，不同二维结构单元体（包括硅氧四面体片、八面体片、层间域的构筑基本符合球体紧密堆积原理，紧密堆积层平行{0001}；四面体片与八面体片构筑TO和TOT结构层时采取多种机制消除二者在二维尺寸上的差异；两种模式的结构层与不同类型的层间物组装形成六种组装模式的晶层；并通过二维结构单元体的组合规律的分析，计算出可能存在的28种TOT型间层结构，它们分属于6种间层结构多体性组装模式；间层结构中，结构层对于八面体片是不对称的，并在属性上表现出极性特征；间层矿物的晶层类型可用6种多体性组装模式加以表达。

Robert Skelton of the Structural Systems and Control Laboratory at the University of California in San Diego."It's the architecture of life."

罗伯特。斯盖尔特说，他在圣地亚哥的加州大学结构体系与控制实验室（the Structural Systems and Control Laboratory ）工作。

The structural language is structural elements simplified out refined from the building and other specialized drawings of structural engineer, including foundation, wall, column, roof beam, board, stair, full-page proof detail picture, etc Then come to form the structural systems of the building or structures with these structural elements, including verticality and bearing and resist strength system of level, and then various load that situation produce in a most succinct way from transmission to foundation.

结构语言就是结构师从建筑及其它专业图纸中所提炼简化出来的结构元素，包括基础、墙、柱、梁、板、楼梯、大样细部图等等。

The academic significance and the applied value of research into Yi structural auxiliary words include the following: 1. The structural auxiliary words play an important role in Yi grammar. Many problems in Yi syntax could be solved if the special features of Yi structural auxiliary words were understood. 2. The study of Yi structural auxiliary words may provide a foundation for a theoretical framework of function words and clarify the rules for the development of Tibeto-Burman languages. 3. The study of Yi structural auxiliary words may help in the study of Chinese grammatical history. It can supply some useful clues in the study of Chinese structural auxiliary words and the historical evolution of Chinese grammar.

彝语结构助词研究的学术意义和应用价值在于：1、结构助词在彝语语法中占有重要的地位，认清了彝语的结构助词特点也就解决了彝语句法的大部分问题。2、彝语结构助词的研究有助于建立藏缅语族语言虚词理论框架，弄清藏缅语族语法手段的发展规律。3、彝语结构助词的研究有助于汉语史的研究，可以对汉语结构助词和汉语语法历史演变的研究提供许多有用的线索。4、彝语结构助词的研究还会对彝语文的规范和教学、双语教育、翻译出版等起到有益的作用，具有实际应用的价值。

This is not an ordinary box, which is used as a background picture of the dialog box, very pretty.

详细说明：这可不是一个一般的对话框，它是用图片作为背景的对话框，非常好看。

Conceal me what I am,and be my aid for such disguise as haply shall become the form of my intent.

遮掩我的身份，帮助我，我的面具将成为我的目的。