查询词典 strength-testing

Strength is the ability of a metal to as tensile strength,bending strength,compressive strength,torsional strength,shear strength and fatigue strength.

强度对于金属而言的能力就可以说是拉伸强度，弯曲强度，抗压强度，扭转强度，剪切强度和抗疲劳强度。

In this project, the selection criteria of matrix and reinforcement for obtaining composites with high strength and toughness are determined. The as-cast and aged microstructures of composites reinforced with particles of different strength are observed, and their metallurgical conditions and stabilization mechanisms are analyzed. The aging precipitation behaviors and mechanisms are studied. Some characteristics of nano-materials (micro-distortion areas) are found in 150nm- Al2O3p/Al composites and their formation mechanisms are expatiated. The "flexible" restriction to the deformation of the matrix by low strength AlN particle is observed by in-situ TEM and SEM techniques, and the mechanisms of its resist on cracks propagation and its contribution to composite strength are revealed. The high temperature deformation behaviors of Al2O3p/Al composites are studied. A rare-earth coating is established on sub-micron Al2O3 particles, leading to an improvement in wettability between coated Al2O3 and liquid aluminum and a decrease in infiltration pressure. The strength and ductility of coated particles reinforced composite are also increased. The interfacial characteristics, bonding structures and their formation mechanisms are studied, and the crystal orientation relationships between reinforcement particles and aluminum matrix are investigated. Finally a lighter composite with better balance of strength and damping properties is reinforced with hollow ceramic microballoons of ultra-lower strength.

本项目发现了获得高强度和高韧性复合材料的基体、增强体选择依据；观察了各种强度质点增强复合材料的铸态和时效态微观组织，分析其微观结构形成的金属学条件及稳定性机理，研究了其时效析出规律和时效机制，发现了150nmAl2O3颗粒增强铝基复合材料基体中的纳米材料特征，并解释了其形成机理；利用TEM和SEM动态拉伸技术发现了低强度质点AlN颗粒对变形协调的&柔性强化&机制，揭示了其对裂纹扩展的阻碍作用和对复合材料高强度的贡献；研究了中强度质点的Al2O3颗粒增强铝基复合材料的高温变形行为，并对其进行了稀土界面层设计与制备，改善了颗粒与铝合金之间的界面润湿性，降低了复合材料铸造渗透压力，提高了复合材料的强、韧性；研究了多种复合材料界面结构及形成机理，确定了增强体与基体之间的界面结合机制，分析了复合材料界面处的晶体学位向关系；最后制备了含微孔的中空型陶瓷颗粒增强的特种复合材料，得到了强度和阻尼综合性能较好的轻质复合材料。

Introduce the cohesion-friction model of rock strength theory, and extend the model to select the strength of sliding plane, discuss the variation rules of peak strength and residual strength under different normal stress, and then present the selection model of shearing strength. After the result of cohesion-friction model is compared with Coulomb Criterion, it is found that when the results of shearing strength are many and adjacent the strength parameters can not be regressed by least square method, instead the results should be divided into some beelines at that time according to the cohesion-friction model.(4) Discuss the characters of hard structural plane and weak structural plane: The adhesive friction theory is applied to research the changing course of shear area of hard structural plane and its influence on shear stress.

3介绍了岩石强度理论中的粘接摩擦模型，运用此模型分析依附型滑动面的演化过程，并将其推广到边坡岩土体抗剪强度的选取，讨论了不同法向应力下峰值强度和残余强度随法向应力的变化规律，在此基础上给出抗剪强度的选取模式，讨论了对实际取值结果的影响，并与传统的Coulomb准则进行了比较分析，指出直剪试验的法向应力在小应力区的点较多且抗剪强度结果差异不大时，不宜直接运用最小二乘法回归抗剪强度参数，此时应结合粘接摩擦模型对结果进行线性分段。

The results show that: the tensile strength, flexural strength and flexural modulus increase by about 10.4%, 62.1% and 122.3% respectively when the mass fraction of the aluminum powder increases from 0 to 50%, while elongation at break and impact strength decrease by about 65.0 and 74.4% respectively; the tensile strength, elongation at break and impact strength all increase with decreasing the particle sizes of the aluminum powders.b Nylon-12 coated metal powders for the indirect SLS process were prepared by the dissolution precipitation process. The coated powders have only 1.0 wt% nylon-12, and their SLS green parts have sufficient strength for features as small as 1.0 mm to be built and post-processed and high dimensional accuracy. The green parts were subjected to the post processing processes including binder decomposition and infiltration of epoxy resin, and then the metal/polymer composite parts with relatively high strength and accuracy were formed.At present, micron-scale inorganic fillers have been widely used to reinforce nylon SLS parts.

将该法制备的尼龙12覆膜金属粉末用于以下两个方面：a使用铝粉增强尼龙12的SLS成形件，通过溶剂沉淀法制备尼龙12覆膜铝复合粉末，研究了铝粉含量及粒径对SLS成形件性能的影响，结果表明：铝粉分散均匀，并与基体有良好的界面粘接；当铝粉含量从0增加到50wt％时，成形件的拉伸强度、弯曲强度、弯曲模量分别提高10.4％、62.1％和122.3％，冲击强度和断裂伸长率下降65.0％和74.4％，耐热性及尺寸精度也得到提高；断裂伸长率、冲击强度及拉伸强度均随着铝粉粒径的减小而增大。b使用溶剂沉淀法制备了间接法SLS用尼龙12覆膜金属粉末，该覆膜粉末中聚合物粘接剂的含量仅为1.0 wt％，其SLS初始形坯具有较高的精度以及足够满足后处理要求的强度，最小精细结构的尺寸达1.0 mm。

Testing for exhaust-gas leakage ;Pressure-testing the system; Pressure-testing the pressure cap ; Testing fan belt;Testing antifreeze-solution strength.

检测废气泄漏情况。对系统进行压力试验。对水箱盖进行压力试验。检测风扇的传动皮带。检测防冻液的浓度。

Develop thorough screening programmes to identify the "provincial project quality inspection teams working procedures"; Adjust steel detector, a few concrete Hin resilient devices, infrared ranger, concrete thickness detector, and more than 10 types of screening equipment, equipment; Equipped with cameras, video cameras and other evidentiary materials; requirements for the preparation of inspection units related materials "examined units and personnel original list" for the registration of imported works of the "Project Profile Form" for the inspection of the quality of acts related units "quality checklist" for the inspection of engineering information "Engineering Quality Inspection Records Form" for the inspection of the quality of engineering entities "Housing construction quality inspection log," and "decorative decoration quality inspection log","roads, bridges project quality inspection log," for inspection Liang, panels, pillars location and diameter steel "reinforcement location checklist" for the inspection of the concrete strength "concrete strength resilience testing Form" inspection works for the detection test units "laboratory quality checklist," and "laboratory examination of records in table","quality laboratory testing checklist" for the inspection of ready-mix concrete production enterprise "ready-mix concrete plant quality checklist","ready-mix concrete plant quality inspection records acts table","ready-mix concrete plant quality control inspection log","ready-mix concrete plant product quality inspection and Registration Form" for the examination of relevant personnel to mandatory standards of the "construction standards mandatory testing of the questionnaire table," for statistical findings of the "quality inspection Tables","Engineering Quality Inspection results summary","project quality inspection results tables","Punishment of project quality inspection list","quality check" and the "existence of major problems tables construction standards mandatory testing of the questionnaire tables."

制定周密的检查方案，确定《省工程质量检查组工作程序》；调校钢筋测定仪、混凝土数显回弹仪、红外线测距仪、混凝土板厚测定仪等十余种检查仪器、设备；配备照相机、摄像机等取证器材；编制用于要求受检单位提供有关材料的《受检单位及人员提供原件清单》，用于登记受检工程有关情况的《工程项目概况表》，用于检查相关单位质量行为的《工程质量检查表》，用于检查工程技术资料的《工程质量检查记录表》，用于检查工程实体质量的《房屋建筑工程质量检查记录表》、《装饰装修工程质量检查记录表》、《道路、桥梁工程质量检查记录表》，用于检查梁、板、柱钢筋位置和直径的《钢筋位置检查表》，用于检查混凝土强度的《混凝土强度回弹检测表》，用于检查工程检测试验单位的《试验室工作质量检查表》、《试验室检查记录表》、《试验室检测质量检查表》，用于检查预拌混凝土生产企业的《预拌混凝土厂工作质量检查表》、《预拌混凝土厂质量行为检查记录表》、《预拌混凝土厂质量管理检查记录表》、《预拌混凝土厂产品质量检查登记表》，用于考核相关人员掌握强制性标准情况的《工程建设标准强制性条文问卷考核情况表》，用于统计检查结果的《工程质量检查情况统计表》、《工程质量检查结果汇总表》、《工程质量检查结果统计表》、《工程质量检查处罚情况一览表》、《工程质量检查存在主要问题统计表》和《工程建设标准强制性条文问卷考核情况统计表》。

This paper emphasized on the strength testing of paper-bag which was produced by Foshan Sanshui KelunPaper.Inc. The test was done according to the Chinese Standards（GB/T453—2002、 GB/T450—2002、GB9774—2002 etc.）.It showed that , the average CD ensile strength of a single paper is 2.96KN/m, above the normal value of 2.0 KN/m; The average MD ensile strength of a single paper is 3.88 KN/m, above the normal value of 3.8 KN/m; The combined CD ensile strength is 7.88 KN/m, above the normal value of 6.0 KN/m; The combined MD ensile strength is 11.91 KN/m, above the normal value of 11.4 KN/m.

本文针对佛山三水科伦纸业公司生产的纸袋进行了强度方面的测试，根据国家标准（GB/T453—2002、GB/T450—2002、GB9774—2002等），借鉴厂内已有的检测方法，测出了该厂生产用纸单层的横向抗张强度的平均值为2.96 KN/m，高于行业经验值2.0 KN/m；纵向抗张强度平均值为3.88 KN/m，高于行业经验值3.8 KN/m；组合横向抗张强度为7.88 KN/m，高于行业经验值6.0 KN/m；组合纵向抗张强度为11.91 KN/m，高于行业经验值11.4 KN/m。

Uses the biggest strength training method (80%～100% biggest strength) adding the unarmed quickest speed training method and the biggest strength training method (80%～100% biggest strength) adding 60% biggest strength load training method; two kind of different training load combination makes the acclivity to lie pushes the barbell training, to upper limb shot fast strength development two groups of not obvious differences.

用"最大力量训练(80％～100％最大力量)+徒手最快速度训练法"与"最大力量训练(80％～100％最大力量)+60％最大力量负荷最快速度训练法"两种不同训练负荷组合做上斜卧推杠铃训练，对推铅球上肢快速力量的发展两组没有明显的区别。③

2Research of strength characteristic for high bending concreteWe researched the bending strength, compression stength and cleavage strength characteristics of different type, different design strength and different age HBSPC , and analyzed the relations of of the strength of different HBSPC,we also analysised the influence regulation for HBSPC strength by the the admix amount and feeding sequence.

2高抗折强度路面混凝土强度特性研究。研究不同类型、不同掺量和不同龄期HBSPC的抗折强度、抗压强度和劈裂强度特性，并分析HBSPC不同强度之间的关系。

To attain the same strength grade, the content of cement in cement fly-ash stabilized hoggin has reduced by 0.5~1% comparing with cement stabilized hoggin. This material has a capability of adapting with different aggregate's gradation and the 4.75mm passing rate can reduce to 30%. Through the studying about the mechanical property of cement fly-ash stabilized hoggin, this manuscript discover that the material has good strength growing performance that its 90d strength growing rate is 385% and its splitting strength that the 7d splitting strength is 0.347MPa and the 90d splitting strength is 0.700MPa accord with requirement in the norm.

粉煤灰处于最佳掺量时，通过粉煤灰的填充、活性等作用，使材料在达到相同强度等级，水泥剂量降低0.5～1%；并且对集料级配具有更好的适应性能且能使集料4.75mm以下通过率降低至30%左右；而且能有效提高材料的强度增长率，90d强度增长率高达385%左右；同时，降低回弹模量16%左右，对材料的抗裂性能有显著的改善作用。

Tom: You are right, he worked hard all the time.

你是对的。他一直都是努力工作。

Take shortcomings,failures,and mockings of others as commonplace and a drive to complete oneself,hold your own opinion over the evalution and disscution divested from others,afterwards sink into the state of eliminate mistakes if any or encourge oneself being not being influenced by the sayinngs of others or having no ideas to do.

把缺点、失败及别人的耻笑等看成是一种常事，当成完善自己的动力，对别人的评价和议论自己心中有主见，做到&有则改之，无则加勉&，不为人言所左右或无所适从。