查询词典 simulation test

To validate the accuracy of the simulation results of numerical steady flow test bench, experiments in a steady flow test bench with the Ricardo anemoscope were taken. The compared results between computations and experiments suggest that the former is reliable.

为验证数值稳流气道试验台模拟计算的准确，在采用Ricardo风速仪的气道稳流试验台上进行了试验，两种方法下的流通系数和涡流比比较说明：模拟结果是可靠的。

Took Chongqing Gong-he tunnel as an engineering example and studied the failure mechanism of surrounding rock and the correlation with bolt support system by using the methods of theoretical analysis, modeling test, numerical simulation and in situ test, some helpful conclusions were arrived as follows.Firstly, a new failure criterion for transversely isotropic rock mass was proposed with consideration of bedding plane orientation and major principal stress, and the corresponding algorithm, arrived through VC++6.0, can be easily embedded into the software FLAC3D for the geotechnical calculation.

论文在国家自然科学基金专项基金创新群体基金项目(No.50621403)以及国家自然科学基金重点项目"隧道与地下空间工程结构物的稳定性与可靠性(No.50334060)"的资助下，以共和隧道为示范工程，运用理论分析、物理模型实验、数值模拟和现场测试等手段，对共和隧道大埋深段层状岩体的围岩变形破坏机理、锚杆支护力学效应及围岩-支护结构的变形特征等内容进行了研究，其主要研究成果有：①在总结和探讨国内外学者提出的层状岩体经验型连续介质破坏准则基础上，结合层状岩体力学特性，考虑层面方向和最大主应力方向两个影响因素，提出了共和隧道层状岩体横观各向同性破坏准则；采用汇编语言VC++6.0实现了横观各向同性弹塑性本构关系的算法，并嵌入FLAC3D有限差分数值分析软件接口中实现数值运算。

To break through the limit of continuous medium theory, a uniaxial compression test of HMA was simulated with discrete element method, and then the simulation was compared with the lab test.

为突破常规数值方法基于连续性的理想假设，进行了某级配的沥青混合料单轴压缩试验的离散元模拟，并将模拟试验与室内试验进行了比较。

Firstly, this paper investigated roundly the basic theory of the ambient vibration method, analyzed systematically the main methods of ambient vibration identification, and discussed their advantages and disadvantages. Then we established the finite element model of structural dynamics and test model and analyzed their mutual relation, improved MUSIC method and correlation function method in the harmonic identification, and gave the subspace method and correlation function method based on continuous model, which is multi-harmonic retrieve technique. And then, this paper also puts forward least-squares method to estimate directly structural physical and modal parameters; this approach replaced the derivative operator in the continuous time model with an equivalent approximation, and estimated the physical parameters of structures by the least-squares method. And then, we discussed the approximation methods of derivative and their convergence. Finally, this paper researched the modal parameters of a frame structure by the simulation and test. The results demonstrated that subspace method, correlation function method and the least-squares method are effective and stable respectively.

全面地研究环境振动识别方法的基本理论，系统地分析环境振动识别方法的主要方法，讨论它们的优点和不足；建立结(来源：6666AB44C论文网www.abclunwen.com)构动力学的有限元模型和试验模型，分析有限元模型与试验模型之间的相互关系；改进谐波识别中的MUSIC识别方法和相关函数识别方法，给出大型结构模态识别的连续型的子空间分解识别方法和相关函数识别方法，这个方法是多元谐波识别方法；提出直接识别结构的物理参数和模态参数的最小二乘方法，这个方法利用导数的近似值代替导数值，并运用最小二乘方法识别结构的物理参数，讨论导数近似值的选择方法，分析算法的收敛性；通过仿真计算和模型实验，研究高层框架结构的模态参数识别，验证子空间分解识别方法、相关函数识别方法和最小二乘识别方法的有效性，算法的稳定性；从理论和试验两个方面分析和研究噪声对识别精度的影响，影响识别精度的因素，以及部分模态成分的模态参数不能够被识别的原因。

The assessment formula for shear capacity was established as well, and in which various impact factors of shear strength was considered comprehensively.3. Directed against the main forms of transverse connection in concrete beam bridges, model test and finite element analysis were carried out to find the impact laws of damage on concrete T-beam bridges, in which the three ways of hinged joint, flange rigid connection and cross slab rigid connection were considered. Transverse distribution and degenerate state of transverse connection were studied under various damage conditions. Based on the analysis of test and simulation results, the rule of live load adjustment coefficient of T-beam bridge was put forward, as well as the calculation formula.4. In view of the influence of the damaged transverse connections to load effect, the load effect model was amended by live load adjustment coefficient.

依据损伤出现频率与重要性等级，提出典型损伤混凝土梁式桥按体系损伤、构件损伤和材料损伤三个层次进行评定的原则。2、基于构件和材料层次损伤评估研究成果，对比分析损伤机理和适用条件，提出了《公路钢筋混凝土及预应力混凝土桥涵设计规范》(JTG D62-2004)抗弯承载力修正计算公式、抗剪承载力修正计算公式以及综合考虑抗剪强度影响因素的抗剪承载力评定公式。3、针对混凝土梁式桥主要横向连接形式，分别按铰结、翼缘刚接和横隔梁刚性连接损伤对T桥梁桥承载能力的影响进行了模型试验和有限元分析，研究了不同损伤工况对T梁桥荷载横向分配的影响及横向连接状态退化情况。

The matching device automatic test-board is the checking tool checked the matching device capability, precision and reliability are the technique of the the matching device, the precision is the precondition of checking the matching device, the reliability is credibility degree of the decision checking consequent.the topic in view of the existing technique level, the main factors, which influence the measurement precision of the large scale test system, are analyzed in this paper, and the solutions improving the precision are put forward.1 using the multi-channel independent ac to transfer dc module, the power supply of the digit part and the simulation part is discerption, reducing the crosstalk between the digital signal and the simulated signal;2the feedback self-checking module is constructed by singlechip compositive 16 high accuracy a/d , established a closed-loop control system through this module and improved system's overall precision effectively.

匹配装置自动测试台是检测匹配装置性能的检测工具，其重要的技术指标是精度与可靠性，其高精度是作为检测匹配装置的前提，可靠性是决定了检测结果的可靠度。本课题针对现有的技术水平，分析了影响大型检测系统测量精度的主要因素，提出了提高精度的具体方案和办法：1采用了多路独立交流转直流模块，数字部分与模拟部分分开供电，减小了数字信号与模拟信号之间的串扰。2利用单片机集成的16位高精度a/d构建了反馈自检模块，通过该模块建立了一个闭环控制系统，有效地改善了系统的整体精度。

The feasibility of these two methods has been proved with the simulation test and dynamic analog test.

通过对仿真试验和动模试验数据验证了这两种鉴别方法的可行性。

The engine ECU dynamic test and analysis system is built with computer simulation and test technology.

1前言 汽车发动机ECU是一个复杂的车载计算机系统。

Based on a physic model formed from the JS-53 A grinding test machine for emery cloth or paper, a grinding simulation system was constituted for emery cloth or paper grinding test.

以JS-53A型砂布砂纸磨削试验机为物理模型建立砂布砂纸磨削试验的仿真系统。

Measurement standard assessment the original of the application; standard measurement of technical reports; measurement standard measurement repeatability evaluation copy of the record; stability of the measurement standard evaluation copy of the record; standard measurement devices and supporting mainly effective measurement equipment approval Copy; carried out in line with the test / calibration of the original records of the project and the corresponding simulation test / calibration copy of the certificate.

申报材料：1。计量标准考核申请书原件；计量标准技术报告；计量标准测量重复性考核记录复印件；计量标准稳定性考核记录复印件；计量标准器及主要配套计量设备有效检定证书复印件；符合开展检定/校准项目的原始记录及相应的模拟检定/校准证书复印件。2。

Don not attempt to do something which you can not to do.

不要企图做那些办不到的事情。

The expression of CTGF and TNF-αweredetected by immunochemistry and the number of Clara Cells was calculated.

光镜下观察肺组织的病理变化，采用免疫组化染色观察肺组织中结缔组织生长因子和肿瘤坏死因子-α的表达和Clara细胞的数量。