查询词典 revolution surface

For regular topology surface, intermediate surface local texture mapping are used; for irregular topology surface, subdivision surface local texture mapping are used. So different topology surface using different texture mapping methods can solve the contradiction between texture effect and processing speed when they are dealt with by single method. The three judge conditions of texture distortion in the process of mapping onto the sphere surface are discussed and the exiting algorithms of mapping are analyzed, the new algorithms of mapping onto the sphere surface are presented. In order to enhance the realistic of graphics, a new function of wood texture is presented. OpenGL is also introduced in this papers and some realization examples of texture mapping based on OpenGL under the environment of VC++ and POV-RAY are presented in some chapters.

对于简单拓扑表面，利用改进的两步纹理映射，对于复杂拓扑表面利用新的面片分割算法，初步解决了颜色纹理中速度与走样之间的矛盾；通过对球面纹理时纹理不变形的三个判断条件的研究，分析了现在各种球面纹理映射算法，并在此基础上提出了一种基于等面积的半球面纹理映射算法，明显减少了球面纹理的纹理变形；针对现有的木纹纹理中，两种表示木纹的颜色差距表现出的颜色突变问题进行研究，提出对这两种颜色进行线性插值或二次插值，使生成的木纹纹理颜色更加连续，更加逼真；在VC++环境下，通过调用Open GL的图形库及在Pov-Ray软件环境下，实现了参数化纹理、球面纹理、凹凸纹理及木纹纹理等各种算法。

However, various methods are used to suppress surface waves from shooting to receiving in the process of seismic survey, thus research should be carried out in the following aspects:① joint inversion with surface wave, refraction first break and microlog data;② offset range and the relation between group interval and surface resolution suitable for use in surface wave analysis;③ the influences of lateral relief of array on propagation of surface waves;④ method for Hi-Fi purification of surface wave signals;⑤ method for extracting dispersive curve through time-frequency analysis;⑥ forward modeling and in-version methods of surface wave in view of three-layer structure.

但石油勘探从激发到接收，都采取各种方式来压制面波，因而需要开展多方面的研究：①结合面波、折射初至波和微测井信息的联合反演；②地震记录中适合面波分析的炮检距范围、道间距与表层分辨率的关系；③排列横向地形起伏变化对面波传播规律的影响；④高保真提纯面波信号的方法；⑤运用时频分析提取频散曲线的方法；⑥针对三层结构的面波正反演方法。

China's "Highway Engineering Technical Standards" will be divided into high-level road according to technical quality, sub-senior, middle and low-level four kinds, all kinds of road surface types are as follows: Senior Pavement - asphalt concrete pavement, cement concrete pavement, plant mix asphalt crushed stone pavement, stone pavement of rocks or neat; second high-level road surface - asphalt penetration-style pieces, gravel road, asphalt road debris, gravel road, asphalt road surface, Treatment, semi-neat stone pavement; middle road - broken, gravel (size distribution, or clay-bound) road surface, irregular stone pavement, other granular surface; low road - aggregates stabilized soil surface, and other local materials, reinforcement or improvement of soil surface.

中国《公路工程技术标准》将路面按技术品质分为高级、次高级、中级和低级四种，各种路面的面层类型如下：高级路面——沥青混凝土路面，水泥混凝土路面，厂拌沥青碎石路面，整齐石块或条石路面；次高级路面——沥青贯入式碎、砾石路面，路拌沥青碎、砾石路面，沥青表面处治路面，半整齐石块路面；中级路面——碎、砾石路面，不整齐石块路面，其他粒料路面；低级路面——粒料加固土路面，其他当地材料加固或改善土路面。

Investigate the assisting of the relation and soil and groundwater monitoring data among the surface feature and image established the relation of the spectrum characteristic with surface feature ,using two kinds of classification and improved post-classification, methods lies two respects: 1Salt steep spectrum luminance value curve of ground higher than surface feature average luminance value curve obviously, and other surface feature luminance value lower than or have around average luminance value curve little wave water body mean the land water areas among them obviously, including the river and surface of water , surface of water of the reservoir and hole pool surface of water By view trend of the

从计算结果得出，盐渍地上的NDVI 值分布在一定范围内，这样就可以取一定的阀值，将反射率较低的盐渍地提取出来。根据盐渍地分布与地下水的相互关系，对分类后的图像进行处理，提高了精度。2 充分利用遥感与GIS 技术在地学分析中的优势，计算各类盐渍地面积、荒漠、水体面积变化，分析近三十年来研究区土地盐渍化动态变化的规律，包括面积变化、盐渍化程度的变化，分析大范围时间尺度上土地盐渍化动态发展的整体趋势。

On the geometric modeling, flat surface and curved surface are used to mesh and describe the model;on the electromagnetic modeling. Different basis functions( flat surface roof-top basis function, flat surface RWG basis function, curved surface roof-top basis function, curved surface RWG basis function) and different test functions (line-matching, Galerkin method) are applied to different cells(plat rectangle facet, triangular patch, Bezier patch, parametric surface, curved triangular patch etc.).

在几何建模方面，分别采用平面元和曲面元对模型进行了剖分和拟合；在电磁建模方面，针对不同的单元(平面元、平面三角元，、Bezier元、参数曲面、曲面三角元等)采用不同的基函数(平面roof-top基，平面RWG基，曲面roof-top基，曲面RWG基)和不同的检验函数进行处理。

The revolution axis of the surface of revolution is calculated by image parameters and top circle of revolution. The rectified image is then used to recover the contour generator and the object is reconstructed.

在理论上讲，利用一张影像就可以实现旋转体的三维重建，但在本文中使用了多张照片，主要是为了获取整个旋转体的纹理。

Derives the formulae for calculating the distortion and stress on the acting surface of flexspline load in the drive process of the harmonic gear drive with three-wave wavegenerator;(2) analyzes and compares the performance of plastic and steel products under light load drive and calculates the probably reached limit of drive ratio for both types of flexsplines under the same load;(3) applies the harmonic gear drive with three-wave wavegenerator to the small-sized multiple-revolution electric device of valves by taking into consideration of the low limit of the drive ratio for the harmonic gear drive with three-wave wavegenerator made of plastics, improves the design on the main drive mechanism of the traditional small-sized multiple-revolution electric device of valves, and validates through examples the feasibility for the harmonic gear drive with three-wave wavegenerator made of plastics to be applied to the small-sized multiple-revolution electric device of valves. Finally the author performs calculations on the two types of the flexsplines of the harmonic gear with three-wave wavegenerator by using the finite element method and analyzes the causes for the errors.

本文根据三波谐波齿轮传动的运动变形特点，采用弹性薄壳的力矩理论，推导了三波谐波齿轮传动柔轮载荷作用面上的变形及应力计算公式；分析比较了轻载传动情况下塑料和钢材的性能，计算了塑料制谐波柔轮和钢制谐波柔轮在相同载荷情况下可能达到的传动比极限；对塑料制及钢制三波谐波齿轮柔轮进行了有限元计算，分析了产生误差的原因；针对三波塑料谐波齿轮传动比极限低的特点，将之运用于小转矩多回转阀门电动装置中，对传统的小型多回转阀门电动装置的主传动机构进行了改良设计，并通过实例验证了三波塑料谐波齿轮传动在小转矩多回转阀门电动装置中应用的可行性。

Based on the former drag reduction experiments of the bionic nonsmooth body of revolution models in the lowspeed wind tunnel, the simulation wind tunnel tests at the wind speed of 44 m/s were performed for the body of revolution models with the tail rectangularly disposed by three different nonsmooth structures, such as the convex dome form with the diameter/height of 1.0/0.5 mm, the dimple concave form with the diameter/depth of 1.0/0.5 mm, and the riblet form with the width/height of 1.0/0.5 mm, in contrast with the body of revolution model with smooth surface.

在前期进行的仿生非光滑旋成体模型低速风洞试验的基础上，将非光滑形态在旋成体模型上的排列方式固定为矩形布置，非光滑的尺寸固定为直径或宽度为1 mm，深度或高度为0.5 mm，在风速为44 m/s时，对布置在模型尾部的凸包形、凹坑形和棱纹形三种非光滑模型与表面光滑模型进行了对比模拟试验。

Notch and groove were produced on fiber's surface by plasma's pHysical bump and corrasion, meanwhile oxygenic or nitrogenic radicals were also grafted on the surface. Through hydrolyzation, acetate fiber's surface will be denuded by cellulase enzyme. Surface of the fiber will be granulated and specific surface area will be enlarged by plasma and enzyme treatment, therefore obviously improve fiber's surface performance.

等离子体对纤维的物理撞击和表面刻蚀使纤维表面产生凹坑和沟槽，同时可在纤维材料表面引入含氧或含氮基团；而纤维素酶对纤维素的水解作用，促使纤维表面被剥蚀；等离子体与生物酶处理都能使纤维表面粗糙化，比表面积增加，使纤维的表面性能得到明显改善。

Remove row and column' and 'put a big number' have been used for the first boundary;a continuous Regional Identification Function is used on the basis of non-variant nodal virtual flux method for the free surface boundary;Gauss formula is used to make the curved surface integral of the free surface boundary transformed as the difference between volumn integral and other curved surface integral to calculate the integral item on boundaries, which avoiding finding the position of free surface, while the continuous Regional Identification Function is applied to calculate volumn integral and surface integral;Crout and PCG method is used for solusion.

对于已知水头边界，采用"去行去列法"和"置大数法"进行处理；对于自由面穿过的单元，在固定网格节点虚流量法的基础上，引入连续的区域识别函数；对于非稳定渗流中自由面边界积分项，采用高斯公式将求自由面的面积分转化为求体积分与其他面积分之差，避免了求自由面的具体位置，同时在计算体积分和面积分时采用连续的区域识别函数；在解法上，采用直接解法和PCG法。

They experience feelings deeply and intensely, and their emotions are often mercurial.

他们的感情深刻而强烈，情绪善变。

Surrounded with or as if with a rampart.

用城墙围绕的用城墙围绕的或类似于为城墙围绕的