查询词典 regulate and control

The thesis contains five chapters. The first chapter summarizes the development and research of switched reluctance drive, discusses the main research direction, and explains the main work in this paper. In chapter 2, hardware system which includes the design of power converter and various control circuit is discussed. TMS320LF2407 DSP is used to design the hardware circuits of SRM control system, and design details including the current detection, position sensing, fault protection, speed detecting, keyboard and display etc. are provided. Because of the full use of the abundant peripheral resources of DSP, it comes to the aim simplifying the circuit structure and heightening the reliability. In chapter 3, the application of neural network on SRM control system is introduced, a new the application of neural network and the method of sampling is proposed and a simulation system based on Matlab/Simulink is established. Chapter 4 discusses the routine designing issue. Because the modularized programming method is adopted, and multi-interrupt processing technique is used, operation efficiency of the control software is highly raised. At last, the foregoing SRM control system is tested. Speed adjustment is realized, and other targets on the research and design of SRM control system are reached, which establishes a good foundation for further research.

本文共分五章，第一章概述了开关磁阻电机调速系统(Switched Reluctance Drive，简称SRD)及其发展和研究现状，论述了其主要研究方向，并说明了本文的主要工作；接下来的一章主要讨论了SRM的硬件系统，主要包括功率变换器的设计和各种控制电路的设计，本文以TMS320LF2407为核心设计了开关磁阻电机控制系统硬件电路，给出了包括电流检测、位置检测、故障保护、测速电路及键盘和显示电路等部分电路的详细设计，充分利用了DSP的丰富外设资源，达到了简化电路结构、提高运行可靠性的目的；第三章介绍了人工神经网络在开关磁阻电机控制系统中的应用，提出了一种新的应用方式(利用GPFN神经网络调节PI参数)以及如何采取样本，搭建了基于Matlab/Simulink的仿真系统；在第四章中，讨论了开关磁阻电机控制软件的设计，采用模块化编程方法，采用基于多中断的控制程序，提高了控制软件的效率；最后，对所设计的开关磁阻电机控制系统进行了实验，实现了电机调速，达到了开关磁阻电机控制系统研究和设计的预期目标，为更近一步研究打下了基础。

The method comprises: A, obtaining service area of user terminal, access and call status control node address of user terminal and session control identifiers of the access and call status control node through domain name node; B, user terminal sends a register request to access and call status control node which acquires the user terminal safety information from distribution apanage user server and performs safety information authentication between user terminal and the access and call status control node; C, the call and status control node modifies user terminal status in distribution apanage user server and downloads every kinds of service information of the user terminal.

通过域名服务节点，获取用户终端所在服务区域信息、和用户终端所属的接入呼叫状态控制节点的地址及该接入呼叫状态控制节点的会话控制标示符；B。用户终端向所述接入呼叫状态控制节点发起注册请求，由所述接入呼叫状态控制节点从分发归属地用户服务器获取该用户终端的安全信息，并进行用户终端与所述接入呼叫状态控制节点之间的安全信息认证；C。所述接入呼叫状态控制节点修改所述分发归属地用户服务器中该用户终端的状态，并下载该用户终端的各种业务信息。

To overcome the bad effect resulting from the nonlinearity time-variability and uncertainty on autopilot system performance during the motion process of aerodynamics missile, and to further improve the flight quality of missile, the autopilot system and used control method are researched. Firstly the integrant structure of system is discussed; then baaed un introducing the traditional PID method, controllers for missile attitude motion are designed respectively using fuzzy self-turning PID method and neural network self-adaptive PID method; at last a simulation experiment is finished. By comparing the simulation results that the designed controllers have good qualities is showed, and the feasibility and validity of applying fuzzy control and neural network into automatic control of aerodynamics missile is confirmed, and the base that other nonlinear control theory can be combined with the traditional control for missile to further improve the performance of missile control system is established.

为了克服飞航导弹运动过程中的非线性、时变性和不确定性对自动驾驶仪系统性能的不良影响，进一步提高导弹的飞行质量，对自动驾驶仪系统及其采用的控制方案进行了研究；首先对系统的整体结构进行了分析，然后在介绍经典PID方案的基础上，分别采用模糊自调整PID方案和神经网络自适应PID方案设计了导弹姿态运动控制器，最后进行了仿真实验；仿真结果的对比展示了所设计控制器良好的品质，验证了将模糊控制和神经网络应用于飞航导弹自动控制中的可行性和有效性，为其它非线性控制理论与导弹传统控制相结合以进一步提高导弹控制系统的性能奠定了基础。

Wire electrode based on the trajectory of the different forms of control, WEDM can be divided into three types: one is shaped by the imitation controlled cutting in line in advance and work to create the same shape by mold, when processing the workpiece at the same time rough and on the mold clamping in the machine tool table, in the process of cutting wire electrode tightly against the mold on the edge of the track for the mobile, thus cutting out and die on the same shape and precision to the workpiece; another One is the electro-optical tracking control, to carry out the cutting line, before the basis of certain parts to enlarge the proportion of drawings depicts an electro-optical tracking map-processing machines will be placed in design stage of electro-optical tracking, tracking platform Photoelectric first line of graphics has always been to follow the track of the Mexican campaign, and then through the use of electrical, mechanical linkage to control the machine tool table, together with the workpiece so相似形wire electrode relative movement, thus cutting out the same shape and design to the workpiece; again a digital control, the use of advanced automatic control of digital technology-driven machine tool in accordance with the pre-processing parameters according to the workpiece geometry pre-processing procedures for the preparation of a good CNC auto-complete processing, the production does not require appearance on board the need to map to enlarge map of the previous two form of control has a higher machining accuracy and a broad range of applications, both at home and abroad more than 95% have adopted WEDM NC.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是靠模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的靠模，加工时把工件毛坯和靠模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着靠模边缘作轨迹移动，从而切割出与靠模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作靠模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95%以上的电火花线切割机床都已采用数控化。切割属电加工范畴，是由前苏联人发明的，我国是第一个用于工业生产的国家，当时由复但大学和苏州长风机械厂合作生产的这是最早的机型叫复旦型，我们国内在此基础上发展了快走丝系统。欧美和日本发展了慢走系统LS

The core issue of nutrient control was focused and the dynamic studies on phosphorus pollution of the whole watershed were conduced: 1 to highlight the non-point source pollution control, which is the difficulties research subject of water resource protection; 2 to perfect the calculation method for phosphate input and output, providing important basis on decision making for nutrient control; 3 to establish database and water quality model, to predict the water quality response after different phosphorus control schemes realized; 4 to determine admissible phosphorus loading and control standard according to the quantitative relationship between the external force function (mainly the exotic nutrient salt concentration or loading) and internal nutrient state response, and to work out the effective and practical techniques for eutrophication control.

围绕营养盐控制的核心问题，进行全流域范围磷污染的动态研究：1）突出了目前我国水资源保护研究难点—非点源污染控制；2）完善了流域水库磷盐收支计算方法，为流域营养盐控制决策提供了重要依据；3）建立数据库和水质模型，预测了在实施不同磷削减控制方案后流域供水水质的响应情况；4）根据湖泊外力函数（主要是外来营养盐浓度或负荷）与湖库内营养状态响应间的定量关系，确定了磷允许负荷量及控制标准，提出了有效的富营养化控制实用技术。

For the aim of saving energy and optimizing control of chilled systems, the performance of VWV systems and characteristics of control systems were analyzed based on the simulation. According to the characteristic of the monitored parameters and controlled variables in VWV systems, three online optimal control strategies were proposed and validated:(1) Optimal strategy for on/off control of chillers according to the ratio of secondary flow rate to primary flow rate.(2) Optimal strategy for the control of secondary pump according to value positions of auto-controlled AHU vales. And (3) Optimal strategy for supply chilled water temperature control of chillers according to valve positions of auto-controlled AHU valves and working status of secondary pump.

为达到节能和优化系统控制的目的，在楼宇空调水系统及其局部控制仿真分析的基础上，针对变流量系统监测点和可调参数较多的特点，提出并验证了3个实时优化控制方案：根据初级和二级冷谋水流量的比率，实时优化多台冷水机组的启／停控制；利用AHU自动控制水阀的阀位信息，实时优化二级水泵的控制；利用AHU自动控制水阀的阀位信息以及二级泵的工作状况，实时优化冷水机组出水温度的控制。

To give the definition of the mass concrete and to concrete\'s cracks together with practical meanings of control ,and give a brief review on the research in the field at home and abroad, at last, methods to control temperature crack of the mass concrete from several aspects such as design measures,concrets material, construction schedules.etc are summed up; To explain the physical mechanics of the concrete and computing methods-Difference Method and Finite Element Method, and illustrate the application of their specific methods repectively;Several temperature factors that can influence the temperature stress of mass concrete baseplate are analyzed. The influence degree of temperature factor can be got through the ANSYS simulation computation the control of temperature can control the temperature stress, consequently control the temperature crack of mass concert baseplate; through the influence of the crack resistance ability of mass concrete baseplate which takes the reinforcement as a part is analyzed. By ANSYS simulation, the best suited volume ratio of reinforcement is found out, at same time the layout of reinforcement with the same volume ratio can also affect the resistance ability of mass concrete baseplate. Sum up of above analysis, anti-crack function of steel bar in early mass concrete baseplate is obvious, so it\'s necessary to consider beneficial effect of construction steel bar in research of temperature control on mass concrete baseplate.

本文先容了大体积混凝土及混凝土裂缝的基本概念，对国内外在这个领域里的研究现状作了扼要叙述，并从结构设计、混凝土材质、施工措施等方面总结了大体积混凝土温度裂缝控制的方法及防止措施；阐述了混凝土的基本物理力学性能，总结了大体积混凝土温度计算的方法——差分法和有限元法，并分别举例说明其具体应用的方法；分析了影响大体积混凝土底板温度应力的几种温度因素，利用ANSYS模拟计算，得出了每种因素的影响程度，通过分析提出了在这几种温度影响因素下如何通过控制温度以达到控制温度应力从而来控制裂缝的具体建议；针对大体积混凝土基础底板中配筋的不同对混凝土底板抗裂能力的影响不同，利用ANSYS进行模拟分析，得出底板中最合适的体积配筋率，同时分析了在相同体积配筋率下钢筋的具体布置对大体积混凝土基础底板抗裂能力的影响，分析表明，配置钢筋对混凝土结构的开裂阻止作用明显，在研究大体积混凝土温度裂缝题目时，要考虑钢筋在其中的有利作用。

At first, this paper surveys nonlinear control and the applications of neural networks in control respectively. Then it studies definitions, mathematical descriptions and conditions of invertibility for nonlinear systems, which are used to analyze the feasibility of inverse system control method. Conclusions about the feasibility of inverse control and the realizability of αth-order inverse systems in engineering are achieved. Furthermore, this paper discusses the feasibility, structure and identification of neural network αth-order inverse system for general single-input single-output continuous or discrete nonlinear systems and various composite control methods based on the αth-order inverse. At last, as a part work of an actual project, this paper focuses on the design of neural network αth-order inverse control method for thyristor controlled series compensation in power systems and its effect in improving the stability of power systems.

本文首先分别概述非线性系统的控制与人工神经网络在控制中的应用；然后研究非线性系统各种可逆性的定义、数学描述及可逆性条件，并用于分析逆系统控制方法的可行性，得出有关逆系统控制方法可行性的结论，阐明一般情况下α阶逆系统才工程可实现；接着本文针对一般单输入单输出连续、离散非线性系统，研究神经网络α阶逆系统的可行性、结构与辨识以及基于神经网络α阶逆系统的各种复合控制方法，并给出应用例子；最后本文结合实际项目，针对采用可控串补的电力系统，设计神经网络α阶逆系统控制方法，研究其对提高电力系统稳定性的作用。

After analyzing and comparing two kinds of current control methods of three-phase VSR: indirect current control and direct current control, the author employs the latter as main control scheme, which is to control the phase and amplitude of ac-side current directly, by using dual closed-loop control scheme, through sampling currents of phase a and b and converting them by 3s/2r to get active component and reactive component of ac-side current.

分析比较了三相电压型PWM整流器的两种电流控制方法：间接电流控制和直接电流控制。

The compatibility of both Gvirens and B.firmus was researched. The fermentation filtrate of Gvirens , under the concentration of 70%, had not distinct inhibitory activity to B.firmus, the biomass of B.firmus would decrease with above the 70% filtrate of Gvirens, but the fermentation filtrate of B.firmus had not inhibitive role to Gvirens. 7, The cooperation control of both Gvirens and B.firm to the pine needle blight was explored:(1) Pathogen inoculation happened prior to the bio-control treatment for 7 days, however, the disease index and control effect had not distinct differences in any treatments even if combination of the two antagonists, but the susceptibility for different kind of pine were different.(2)when antagonist and pathogen were inoculated at the same time, some control effect to the pine needle blight, including certain extent cooperation control of both Gvirens and B.firm were proved, but it wasn't distinct when two antagonists used separately, and the change of the antagonist concentration had little effect to the control effect.

G.virens与B.firmus对松赤枯病的协同控制显示：(1)预先接种病菌后(7天)再进行生物防治处理，不管那种情况，感病指数和防治效果在处理间差异不明显，浓度影响无显著差异，即使是两种生防制剂联合作用也未显著提高其防效，但不同树种间的感病性有明显差异；(2)领抗菌与病原菌同时接种，对松赤枯病有一定防治效果，两菌联合有一定的协同作用，两菌分别单独施用防效差异不显著，浓度变化对防效影响不大；(3)预先接种颇抗菌能显著提高防治效果，两菌联合处理防效更优，感病树种的感病指数可降至13一15，抗病树种的感病指数可控制在3%左右；在同一浓度下B.f1'r功US、叹叮厂即s间无显著差异，在同一领抗菌下，浓度愈高，防效愈高：松，(4)三种生防接种方式的平均效果分析表明，叹F行ens最高平均防效49.5%黑 B。

There had been a moment during the breakfast meeting, though, after the backslapping and the small talk and when all of us were seated, with Vice President Cheney eating his eggs Benedict impassively and Karl Rove at the far end of the table discreetly checking his BlackBerry, that I witnessed a different side of the man.

那次早餐会期间，在表示过关心和寒暄以后，我们所有人坐了下来，我注意观察了一下，副总统切尼面无表情地吃着班尼迪克蛋（Eggs benedict，源自美国，以英式松饼、火腿、水煮蛋以及荷兰酱组合而成），卡尔。罗夫在餐桌的远端谨慎地经常查看他的黑莓手机，我目睹了他所不为人知的一面。

Talk Undelete failed; someone else may have undeleted the page first.

Talk 无法删除选定的页面或图像（它可能已经被其他人删除了）。