查询词典 loading area

The conclusion is that the casing structure should be optimized during gear box casing design to ensure sufficient safety factor at loading area of the casing.

传动箱箱体在设计过程中应优化箱体结构，确保箱体受力部位具有足够大的安全系数。

Second, the eight-node isoperimetric elements are used to discretize the loading area.

然后，采用8节点等参元离散加载区域。

Outside loading area message has been reduced.

在载入区域信息之外已经被减少。

Then I glanced over his shoulder at the conveyor belt that was moving baggage from the check-in counter down to the loading area… Line 18

这时我朝他身后的行李输送带瞥了一眼，输送带正把行李从办理登机手续处往下面的装货区传送

The primary studying works and characteristics:1 To summarize reinforcing theory of cement mixing pile composite foundation2 To analyze the primary mechanics characters and changing rules of cement mixing pile, based on analysis of test data both indoor and outdoor.3 To discuss siding frictional resistance, ending resistance, ultimate bearing capacity of simple mixing pile and effectiveness factor of grouped piles, loading ratio of soil between piles under cushion cap of grouped piles and stress ratio of pile and soil and so on, and use many computation method and experimentation method to ensure bearing capacity of mixing piles composite foundation.4 To point out and analyze eight sides flaws and problems of the bearing capacity calculation method of mixing pile compositefoundation which ensured by national and normative method/ formula.5 To apply test results of loading tests and a few settlement observation data, use gray theory to predicate ultimate bearing capacity of deep mixing piles, actual example demonstrate engaging between theoretical predicted value and actual value.6 To apply groovy layerwise summation method to discuss entity piles method, double foundation method, equivalent layerwise summation method and consolidation theoretical method and so on, especially by combination of engineering example, use FEM to calculate or discuss the settlement and changing rules of composite foundation.7 To discuss problems of critical length of composite foundation by combination of engineering example and numerical analysis method, and analyze the contrast of critical length between simple pile load and most area load of composite foundation, not only critical length of composite foundation is relative to modulus ratio between piles and soil, but also upside load distribution area of composite foundation.

主要的研究工作与特色为：(1)总结了水泥搅拌桩复合地基的加固原理；(2)在对室内外试验资料进行统计分析的基础上，系统分析了搅拌桩水泥土的主要力学特性及其变化规律；(3)探讨了搅拌单桩的侧摩阻力、端阻力、极限承载力及群桩效率系数、群桩承台下桩间土荷载分担比及桩土应力比等，提出用多种计算方法并结合试验方法来综合确定搅拌桩复合地基的承载力；(4)明确指出和分析了按国家有关规范的方法确定搅拌桩复合地基承载力所存在的八个方面的缺陷与问题；(5)利用过去没有加载至破坏阶段的载荷试验成果和较少的沉降观测数据，尝试了用灰色理论预测深层搅拌桩的极限承载力，实例表明理论预测值与实测值吻合较好；(6)在常规分层总和法的基础上，探讨了复合地基沉降计算的实体墩基法、双层地基法、等效作用分层总和法、固结理论法等，特别是结合工程实例，用有限元数值计算等方法计算和讨论了搅拌桩复合地基的沉降及其变化规律；(7)结合工程实例，用数值分析方法探讨了复合地基临界桩长的问题，指出和分析了单桩荷载下的临界桩长与复合地基大面积荷载下的临界桩长存在很大的差别，复合地基的临界桩长不仅与桩土模量比有关，而且与复合地基上部荷载分布面积有关。

Excellent adiabatic design reduces heat loss and temperature recovering time greatly, ensures no pollution in loading area, and staff can be far away from metaphosphoric acid harm.

良好的隔热设计减少了热量的损失并减少了温度恢复时间，保证装载区无污染，使操作人员远离偏磷酸的危害

One flush end-plate external joint under monotonical loading and the other four joints under cyclic loading were tested. Failure modes and the effects of reinforcement ratio and concrete in column flange were synthetically considered during cyclic loading. Results of the experiments show that external flush end-plate composite joint also have quite hysteretic behaviors, better strength resistance and stiffness that are worth to promotion in seismic area.Based on experimental results and plastic analysis simplified formulas on moment resistance of semi-rigid composite joints were introduced.

本文对1个半刚性端板连接组合边节点进行了单调静力加载试验并对4个半刚性端板连接组合边节点进行了循环加载试验研究，主要探讨了节点的破坏模式以及混凝土板内纵向钢筋配筋率和柱翼缘内填充混凝土对节点性能的影响，试验结果表明端板连接组合边节点依然具有良好的滞回性能，较好的延性和耗能能力，是一种值得推广的半刚性梁-柱节点形式。

Home position shear tests of slope rock, point loading tests and indoor AMD simulation action tests in XingQiao concave slope had show shearing strength and coherence between body layers of quartz sandstone decrease by 13.2%~21.3% after attacked by AMD, the angle of internal friction between layers is decreased by 5.0%~7.5%, in general, AMD affects the rocks mechanical property at range of 60~100m interior the perpendicular slop. Data analysis shows: 1 The actions to slope are major focused on zone of weakness, shearing strength of slope foot and AMD centre are reduced by 52% and 64.7% separately. 2 The explosion stress wave of long distance field has obviously increasing influence to disturbance amplitude value of slope with increasing of the slope height and distance, the response of the top of slope and fault region are obvious as well as damage effect; the foot of slope is with smallest disturbance amplitude value, the disturbance amplitude value of the step close to free face is obviously bigger than the interior of slope. 3 With the coupling effect of the AMD and explosion loading, the stress distribution inside of slope mainly presents characters of explosion stress field; the area affected by AMD becomes a weak area of shearing stress.

新桥深凹露天矿边坡岩体的原位剪切试验、点载荷试验、室内模拟AMD作用试验表明：AMD蚀化后的石英砂岩，岩体层面间的抗剪强度和粘聚力减小的幅值约为13.2%~21.3%；层面间内摩擦角减小幅值在5.0%~7.5%之间；AMD一般影响垂直边坡体内部在60~100m范围内的岩体力学性质数值分析表明：AMD对边坡体的作用主要集中在弱化区域内，边坡体的底脚和AMD作用中心区域的剪切应力减少了52.0%和64.7%；(2)随着边坡体高度和距离的增加，远场爆炸应力波对边坡扰动幅值的增加趋势明显，边坡顶部和断层部位的响应突出，损伤效应明显；边坡底脚扰动幅值最小，临空面附近台阶的扰动幅值明显大于边坡体内部；(3)AMD与爆破荷载耦合作用后，边坡体内部的应力分布主要呈现出爆炸应力场的特征，AMD影响区域形成了一个剪切应力弱区。

The direct transportation in loading area is one of the most rational and basic way to the staple freight transportation, which has advantages of abating the scarcity of the ra.

由于装车地直达运输是大宗货物运输的一种最合理、最基本的形式，而且装车地组织直达运输具有缓和铁路运输能力紧张、加速物资周转、降低运输成本等优势，因此，进行装车地列车编组计划优化是我国铁路货运的一种必然选择，对于国民经济持续快速协调健康发展具有重要的战略意义。

In order to resolve the curing technology of loose tobacco curing barn, and spreading it in most tobacco planting area, the series of research of curing capability, technology of loading and curing technology on loose tobacco curing barn were studied. We found out the curing technology of loose tobacco curing barn when adopting nature loading method, the loading density were 75-85kg/m3, and the thermometer were hanged at the bottom layer. This technology was on the base of its own characteristic, it also integrated the technology of the three stage curing technique, and it had the virtue of simplicity of operation, earthliness and understandability, better curing effects, and preferably spreading foreground.

为解决散叶烤房烘烤工艺难题，使其能在广大烟区快速推广，通过对该烤房烘烤性能、装炕技术和烘烤工艺的系列研究，提出了采用自然堆积法装烟，装烟密度75~85kg/m3，温度计挂在一层时的散叶烤房烘烤技术，该技术根据散叶烤房自身的特点并结合&三段式烘烤工艺&，操作简单，通俗易懂，易于被烟农掌握，烘烤效果较好，有较好的推广应用前景。

Cynanchum Lingtai apricot production in the average weight 65 grams, the brightly-colored fruit, juicy rich, sweet-sour taste, sweet from the nucleolus, when the late Qing Dynasty famous Shaanxi, Gansu provinces, the Qing imperial court Tongzhi tribute for years.

灵台生产的牛心杏平均单果重65克，果实色泽鲜艳，汁多味浓，甜酸适口，离核仁甜，清末时就驰名陕、甘两省，清同治年间曾为朝廷贡品。

Chenopodium album,Solanum nigrum, and Amaranthus retroflexus were very susceptible to the herbicides. Polygonum persicaria and Abutilon theophrasti were relatively less susceptible to the herbicides, and Lycopersicon esculentum was not susceptible to it. The relationship between reduction rates of weed biomass and PPM values of weed leaves 2,4, and 6 days after treatment was established.

供试的6种杂草对该混剂的敏感性存在显著差异：红心藜Chenopodium album、龙葵Solanum nigrum和反枝苋Amaranthus retroflexus对该混剂最敏感，ED90值分别为47.65、71.67和29.17g/hm2；春蓼Polygonum persicaria和苘麻Abutilon theophrasti敏感，ED90值分别为96.91、114.20g/hm2；而番茄不敏感。