查询词典 laser material

Based on the laser longitudinal mode splitting theory, a novel scheme of dual-frequency laser with large frequency-difference is presented using electrically controlled birefringence of liquid crystal, and the transmitted resonant mode splitting by birefringent of Fabry-Perot etalon has been analyzed theoretically. A new element of liquid crystal Fabry-Perot etalon is designed and fabricated, which serves as aselector and splitter of both laser longitudinal modes and Fabry-Perot etalons transmitted resonant modes. Two different experimental systems of laser-diode end-pumped Nd:YAG laser have been set up using two different LDs, and the transmission of liquid-crystal cell have been measured. When the empty LCFP is inserted in the cavity of high-power LD pumped Nd:YAG laser, the oscillation of a single laser longitudinal mode have been observed, such a result shows that the designed and fabricated LCFP element is capable of selecting single axial mode. While an anti-reflected liquid crystal cell is inserted in the cavity of Nd:YAG laser end-pumped by the high-power LD, it is difficult to confirm weather the laser longitudinal modes have been spitted or not. The subject is summarized in this thesis and the improvement of the project has been presented.

论文以激光纵模的分裂理论为基础，提出了可望获得几十GHz甚至上百GHz的液晶电控双折射双频Nd：YAG激光器的总体方案，并对用双折射效应分裂F-P标准具透射谐振模进行了理论分析；设计并加工了一种集激光纵模选择、激光纵模分裂和F-P标准具谐振透射模分裂于一体的多功能元件——液晶电控双折射F-P标准具；建立了两种不同功率激光二极管端面泵浦的Nd：YAG激光实验系统，并对液晶盒的透射性质进行了测试；将未灌注液晶的空液晶F-P摘要标准具插入大功率LD泵浦Nd：、叭G激光谐振腔内，观察到了单纵模激光输出，说明所设计和加工的液晶F一P标准具具有纵模选择能力；将镀有增透膜的液晶盒插入大功率LD泵浦Nd八7AG激光谐振腔内，是否产生了激光纵模分裂现象还难以确定。

The invention relates to a light pumping system for all-solid laser, particularly a light pumping system for disc type laser, comprising heat sink, laser crystal, optical fiber, plane reflector, a first concave reflector, a second concave reflector, and a third concave reflector, and adopting a structure that the plane reflector is between the optical fiber and the first concave reflector, to make the LD and laser cavity on the same side of the laser crystal, thus reducing the packaged size of the laser; the invention fixes the plane reflector on the heat sink to reduce the inclined incident angle of the pumped light beam, thus the pumped light can be fully absorbed, and the invention solves the problem of pumping efficiency and largely reduces the bulk of the laser, beneficial to the all curing of the product and ensuring the cooling requirement of the laser crystal.

本发明涉及全固体激光器的光泵浦系统，特别是一种盘式激光器的光泵浦系统。包括热沉1、激光晶体2、光纤3、平面反射镜4、第一凹面反射镜5、第二凹面反射镜6、第三凹面反射镜7，本发明采用平面反射镜位于光纤与第一凹面反射镜之间的结构，使LD和激光腔位于本发明激光晶体的同一侧，从而减小了激光器的封装尺寸；本发明将平面反射镜固定在热沉上，使泵浦光束斜入射角减小，泵浦光则能充分吸收，为此，本发明解决背景技术采用第一凹面反射镜使泵浦光束斜入射角过大引起的像散，泵浦光斑变形引起泵浦效率降低问题，使得本发明可选用大面积半导体制冷器，避免使用水冷，则激光器的体积大大减少，有利于产品的全固化，保证了激光晶体的散热要求。

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component. For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper. For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space state informatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision. Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为（n-1）维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料（单质材料作为特殊的功能梯度材料看待）、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component.For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material .distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper.For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space stateinformatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision.Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为(n-1)维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料(单质材料作为特殊的功能梯度材料看待)、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

The mechanical property testing shows that the seamless PLLA tubes perform excellent radial strength,which indicates that the mechanical properties of biodegradable stents made of these tubes was supposed to be excellent.PLLA and its composites were first used in preparing seamless tubes as antecedency of laser-cut biodegradable coronary stents in china.Finite element analyses of the biodegradable coronary stent model indicate the explorative design basically meets the requirement of reasonable and applicable stents.There is not such kind of research yet in domestic.Optimum laser-cuttting parameters of CO2 laser was cauculated based on experiential formula,within it,biodegradable coronary stents,especially those with complex structure would be manufacutured from seamless tubes quickly by laser microprocessing with high consistency to the design model.The processing efficiency of the CO2 laser demonstrated in experiential formula by us will play an important guiding role in manufacturing biodegradable stents by laser-processing.Our stents that ascribed to laser-cutted,slotted tube stent are proved to be biodegradable, self-expandable and good biocompatible,basically reach the international level on the aspest of manufacturing procedures and design.

研究结果表明：壳聚糖改性材料综合性能优于纯PLLA，更适合于作为可降解冠脉支架的原材料；自主设计的探索性自膨胀管状闭环型可降解冠脉支架的性能符合冠脉设计要求，设计、验证生物可降解冠脉支架模型的研究在国内还未见报道；制备的改性PLLA无缝管的力学性能优越，可通过激光切割获得冠脉支架，这是国内首次采用聚乳酸材料来制备通过激光加工出可降解冠脉支架的无缝管；二氧化碳激光器加工精度能达到加工要求，加工出来的血管支架名义设计与实测值误差小，实现了冠脉支架、尤其是带有复杂外观设计冠脉支架的快速化、规范化加工，对二氧化碳激光器加工聚乳酸材料的效果研究在国内外属于首创，获得的经验公式对日后的深入研究有重要的指导意义；制备的支架为激光切割管状闭环型冠脉支架，支架外观设计、支架加工手段、支架的性能都基本接近国际水平，支架样品符合设计的理念，可以实现自膨胀功能。

Our main work is as follows: the stable laser mode theory in uniform plasmas is extended to non-uniform plasma cases; the discussion of the sufficient and necessary conditions for laser self-focusing in uniform plasmas is developed to non-uniform plasma cases; a quantitative approach to judge the impact of different plasma density distribution on laser self-focusing is proposed; the evolution properties of asymmetric laser filed in non-uniform and uniform plasmas are discussed and mechanisms that symmetric channel-like plasmas can confine the laser centroid around the plasma channel axes and symmetrize initially asymmetric laser beams are proposed; the formation of solitary standing wave in moderate plasma density is studied by PIC simulations and can be explained by stimulated Raman scattering of laser beams in plasmas.

主要工作为：把均匀等离子体中激光的稳定模理论推广到横向非均匀等离子体情形；把均匀等离子体中激光自聚焦的充分和必要条件的讨论推广到横向非均匀等离子体情形；给出横向密度分布不同的等离子体影响激光自聚焦的定量判据。讨论了初始不对称的激光场在横向非均匀及均匀等离子体中的演化特性，并提出了具有对称腔道结构的等离子体箍缩激光质心和对称化初始不对称激光场的物理机制。用粒子模拟讨论了激光场在等离子体中形成孤立驻波的过程，认为前向受激拉曼散射是发生此现象的可能机制。

First the traditional non-optical detection technology for gas concentrations is briefly introduced, such as ultra-sound technology, gas sensing, catalytic thermal, gas chromatography, interferometry applications, and then the spectral analysis based on the concentration of gas detection is discussed. The latest technological developments on the differential absorption spectroscopy, Fourier transform infrared spectroscopy, tunable laser diode laser absorption spectroscopy, laser radar and differential absorption Raman scattering laser radar, laser-induced fluorescence spectroscopy, laser Photoacoustic Spectroscopy are reviewed in detail.

首先对传统的非光学气体浓度检测技术作出了简单的介绍，包括超声波技术、气敏法、热催化法、气相色谱法、干涉法应用技术，被动检气管法，然后重点阐述了基于光谱学分析气体浓度检测技术的最新发展动态，其中分别对差分吸收光谱技术、傅里叶变换红外光谱技术、可调谐激光二极管激光吸收光谱技术、差分吸收激光雷达和拉曼散射激光雷达、激光诱导荧光光谱技术、激光光声光谱技术进行了详细介绍，最后提出了现代气体浓度检测技术的发展方向。

Hongsheng specializing in the production of decorative materials such as: special silver, black, silver pieces, small horizontal line, gold line, gold pieces, 1 / 4 gold box, gold line spectrum, Silverstrand spectrum, gray gold stripes, black gold stripes , pearl white, pearl black, pearl light gray, dark gray pearl, red laser wire, white wire laser, laser transparent silk, gray silk laser, laser dark gray silk, silk blue laser, red wood, silver gray in stripes, blue silver box and so on.

鸿盛专业生产装饰材料如：银特，黑皮，银碎，小横线，金横线，金碎，1/4金方格，金线谱，银线谱，灰金条纹，黑金条纹，珠光白，珠光黑，珠光浅灰，珠光深灰，红镭射丝，白镭射丝，透明镭射丝，灰镭射丝，深灰镭射丝，兰镭射丝，红木纹，银灰中条纹，兰银方块等等。

Poly decade refining production applications rich practical experience, independent research and a series of laser processing equipment, further re-processing base in actual production Strict testing, continuous improvement, and ultimately the formation of "laser" brand laser cutting board production equipment Products: laser knife mold cutting machine, laser plotter, laser proofer, computer automatically machetes, and other cutting board production related equipment.

聚十年之生产應用所提煉的丰富实践经验，自主研制出系列激光加工设备，再经加工基地的严格实际生产檢驗，不断完善，最终形成"嘉洛激光"品牌的激光模切板制作设备系列产品：激光刀模切割机、激光绘图机、激光打样机、電腦自动弯刀机及其它模切板制作相关设备。

Studies on basic working principles and designs of fiber lasersThe basic working principles as well as the major characteristics of laser and fiber lasers are firstly reviewed,including the interaction between light and matter, the laser oscillation conditions and the spectrum distribution,the gain characteristic and spatial hole burning effect,the influence of external environment on the stability of laser output and the actual limits of fiber laser bandwidth;The designs of bidirectional single-mode Er-doped fiber ring laser and multi-wavelength laser is then discussed,respectively;The characteristics of dynamic grating reflection spectrum of the fiber saturable absorber is systematically analyzed.?

在激光型光纤传感器的设计、实验现象的理论解释等方面做了如下的研究工作：光纤激光器的基本原理与设计方案概述了激光和光纤激光器的基本原理，包括光与物质的相互作用，激光振荡的条件及频谱分布等激光产生的基本原理：掺铒光纤的增益性质，空间烧孔效应和外界扰动对激光输出稳定性的影响，光纤激光器的实际极限带宽等光纤激光器的相关知识；分别讨论了双向单纵模环形腔激光器和多波长激光器的设计方案；系统地分析了掺杂光纤饱和吸收体中形成的动态光栅的反射谱特性。

Sodium citrate; calcium carbonate; calcium hydroxide; potassium bicorbonate; magnesium carbonate; ferrous sulphate; Zinc sulphate; copper sulphate; manganese sulphate; potassium iodide; sodium selenite.

柠檬酸钠；碳酸钙；氢氧化钙；碳酸氢钾；碳酸镁；硫酸亚铁；硫酸锌；硫酸铜；硫酸锰；碘化钾；亚硒酸钠。

All this to say that I'm glad filmmaking hasn't become completely ironic. I can enjoy an ironic film as much as the next person, but they usually involve a message of some sort. One that's delivered in a smirkingly clever way that requires little in the way of talent.

所有这些都是说，我很高兴电影制作没有变成完全讽刺艺术，我可以和下一个人一样享受讽刺电影的乐趣，虽然他们经常会被划归到一定级别，技术方面不需要很高的才能。