查询词典 hyperbolic cylindrical surface

The results show that the prediction errors of the variance and curve shape between the quasi consolidation model and hyperbolic model are small and with the verification of the hyperbolic model, the quasi consolidation model can give a better prediction of post-construction settlement of the loess subgrade.

结果表明：双曲线模型与似固结模型的误差平方和与预测曲线的误差均较小，能较好地反映黄土路基工后沉降的规律，两者相互印证，提高了工后沉降预测的可靠度。

Experimental results show that: bearing capacity of JPP is thirty percent higher than that of cast-in-place pile which has the same length and diameter with JPP. The deformation of JPP is controlled by core pile; axial force distribution of PHC is different with soil-cement; and their axial force ratio in same section is their elastic modulus ratio. Distribution of inner and outer friction resistance is similar; and the inner friction is about 1.62 times of the outer one; it is about the ratio of JPP diameter and PHC diameter. Furthermore, the relation between friction resistance and relative displacement is similarly hyperbolic; and the relation between dip resistance and displacement is also hyperbolic.

试验结果表明，JPP桩与同桩长、同桩经灌注桩相比承载力高30%以上；JPP桩变形由芯桩控制，管桩轴力分布与水泥土轴力分布规律不一致，但同一截面上管桩和水泥土的轴力比值约为其弹性模量的比值；内外摩阻沿桩身的分布规律类似，内摩阻是外摩阻的1.62倍左右，约为JPP桩直径和管桩直径的比值；桩侧摩阻力与桩土相对位移近似双曲线分布，桩端阻力和桩端位移也近似双曲线分布。

The method of obtaining time delay parameters with the reverse access channel is discussed. The modified algorithms of classic correlation methods of TOA estimation are proposed. Noncoherently combining algorithm and group coherent combining algorithm are given. They decrease the computational complexity and are more suitable for implementations in practical systems. The leading edge detection algorithm is proposed to mitigate the effect of multipath in TOA estimation. Then the secondary search method is proposed, it can solve the matching issue of PN code in CDMA systems. The location algorithms based on LS are discussed; include circular trilateration with LS, hyperbolic trilateration with reference differencing, hyperbolic trilateration with sequential differencing and circular trilateration with TOA differences. The design and implementation of wireless location system based on TOA/TDOA in CDMA2000 systems are given. The location process is discussed, and the hardware and software implementation of TOA estimation are given. Finally, the wireless location system which uses TOA estimation and LS location algorithms above is tested in the real environment.

文中讨论了采用CDMA2000反向链路中的接入信道来获取时延的方法和过程；对TOA估计的传统的相关法进行了改进，提出了非相干合并相关法和分组合并相关法，减少了基于相关的时延估计算法的运算量，提高了算法的实用性，对算法进行了仿真和性能分析；采用边缘检测技术有效减少了TOA参数估计中的多径干扰，提高了时延参数估计的准确度；提出了一种TOA估计的二次搜索法，解决了多个定位测量单元同时进行TOA估计的PN码匹配问题，进一步了提高TOA估计的精度；在采用时延值的定位算法中引入了基于LS的圆周法、基于参考差的双曲线法、基于相邻差的双曲线法和基于TDOA的圆周法，讨论了各算法的应用条件，进行了算法性能的仿真分析；给出了CDMA2000系统中的TOA/TDOA的无线定位的系统方案和实现流程，并对TOA值估计算法进行了软硬件实现，还对采用TOA估计算法、LS定位算法和定位系统设计方案实现的定位系统的进行了现场定位性能测试。

Cylindrical Grinder: ordinary type-based series, mainly used for grinding cylindrical and conical outer surface of the grinder.

1外圆磨床：是普通型的基型系列，主要用于磨削圆柱形和圆锥形外表面的磨床。

To investigate the dispersive character of cylindrical Rayleigh wave, a finite element model is developed to simulate laser inducing cylindrical Rayleigh waves on the surface of an isotropic cylinder.

为了研究柱面上激光激发的瑞利波的色散特性，建立了激光在各向同性圆柱表面激发瑞利波的有限元模型。

A 2D PIC model was used to simulate the PIII process for a planar target. The simulation results in one whole pulse show that the sheath expands with a decreasing speed and the sheath shape would change form elliptically cylindrical to circularly cylindrical. The dose distribution of ion implantation in the target surface is not uniform, and the concentration depth profiles of retained dose are considerably different, in different positions of the target.

本论文采用二维粒子模拟方法对等离子体离子浸没注入技术进行了模拟研究，在一个完整脉冲时段内，等离子体离子浸没注入平板靶的模拟过程表明：等离子体鞘层的扩展先快后慢，鞘层形状由椭圆柱形向圆柱形演化；注入离子剂量在靶表面的分布是非均匀的；在靶的不同位置注入的离子在改性层中的浓度深度分布有显著差别。

A self-drilling anchor (10) for use in a friable material (1) comprises a body (12) having an axis (13), a flanged rear end (14), a drilling front end (16) and a generally cylindrical portion (18) therebetween having an outer surface (20) with a thread (22) disposed thereon, wherein the body forks, beginning at a predetermined distance from the flanged rear end, into a first leg (24) and a second leg (26), the first leg extending forwardly into a drilling tip (28) and having a generally rearward facing shoulder (30) angled obtusely outwardly with respect to the axis, wherein the body (12) has an axial bore (32) for receiving an elongate fastener (2), the axial bore (32) extending substantially through the flanged end (14) and the generally cylindrical portion (18) and leading to the generally rearward facing shoulder (30), wherein the anchor (10) has a drilling mode wherein the second leg (26) nests behind the generally rearward facing shoulder (30) of the first leg (24), and an anchoring mode wherein the legs are pivoted apart from one another.

一种用于易碎材料(1)中的自攻螺钉(10)，包括：主体(12)，其具有中心轴(13)、带有凸缘的后端部(14)、用于钻孔的前端部(16)和位于所述后端部和前端部之间的通常为圆柱状的部分(18)，所述圆柱状部分(18)的外表面(20)上布置有螺纹(22)，其中主体从距离带有凸缘的后端部的预定的距离处开始分叉为第一腿(24)和第二腿(26)，第一腿向前伸入钻孔尖端(28)，并且具有相对于中心轴向外成钝角的通常面向后的肩部(30)，主体(12)具有容纳细长状紧固件(2)的轴向孔(32)，轴向孔(32)基本延伸穿过带有凸缘的端部(14)和通常为圆柱状的部分(18)，并且通向通常面向后的肩部(30)，螺钉(10)具有钻孔状态和固定状态，在钻孔状态，第二腿(26)套在第一腿(24)的通常面向后的肩部(30)之后，并且在固定状态，腿彼此转动分离。

By manufacturing the two cylindrical resistor tubes in the liquid groove of the conducting electricity, the variable of the liquid-surface height is linear to the variable of the cylindrical resistor tube.

摘 要：论述倾斜度测试仪的测量原理，提出在导电液体槽中制造两个圆柱形电阻管，这样可以把圆柱形电阻管液面高度的变化量线性地转换成圆柱形电阻管电阻的变化量。

Car at both ends of cutting surface, drilling central hole of the cylindrical Rough →→→ quenched Hole Research Center Xiu → semi-refined car of the cylindrical tank cars →→→ chamfering hobbing milling keyway →→→ Hole Research Center repair mill → test cut.

下料→车两端面，钻中心孔→粗车各外圆→调质→修研中心孔→半精车各外圆→车槽→倒角→铣键槽→滚齿→修研中心孔→磨削→检验。

Notch and groove were produced on fiber's surface by plasma's pHysical bump and corrasion, meanwhile oxygenic or nitrogenic radicals were also grafted on the surface. Through hydrolyzation, acetate fiber's surface will be denuded by cellulase enzyme. Surface of the fiber will be granulated and specific surface area will be enlarged by plasma and enzyme treatment, therefore obviously improve fiber's surface performance.

等离子体对纤维的物理撞击和表面刻蚀使纤维表面产生凹坑和沟槽，同时可在纤维材料表面引入含氧或含氮基团；而纤维素酶对纤维素的水解作用，促使纤维表面被剥蚀；等离子体与生物酶处理都能使纤维表面粗糙化，比表面积增加，使纤维的表面性能得到明显改善。

There are two types of gold deposits in this area, namely altered rock type and quartz vein type.

本区金矿床包括两种类型：柴胡栏子金矿床为蚀变岩型金矿；莲花山和红花沟金矿床属石英脉型。

You were home and it was two weeks ago.

你回到了家里。当时是两周前。