查询词典 comparison method

Then the coefficient and equation were used to evaluate the system bias between laboratory method and comparison method.

结果 LDH测定结果各系统的误差临床均可以接受。结论各检测系统测定LDH结果具有可比性。

For convenience of the comparison and application, method for calculating the binder path length is set up in accordance with Newton-Cotes method under the aid of computer. The binder shrinkages, which are more useful in fabric production, are converted from binder path length, and compared with the testing shrinkage results.

为了方便比较和应用，采用Newton-cotes法，建立了接结纱曲线长度的计算方法，并由计算机进行求解；再将模型计算的接结纱长度转化为接结纱缩率，并与实际测试的接结纱缩率相比较，发现两者基本是一致的，误差较小，说明建立的接结纱模型是正确的。

The development of travelling trestle bridge fabrication machine in China was reviewed. Bridge fabrication machines were classified according to PC box girder's position in travelling trestle. A comparison was made between two construction methods: precast girder assembly method and cast\|in\|situ method.

我国移动支架造桥技术的进展预应力混凝土梁的施工有架桥机架设、顶推架设、悬臂灌筑、悬臂拼装、造桥机造梁等几种方法，各有其适用范围，而采用造桥机架梁系墩顶原位造梁，跨度、墩高适用范围广，不影响桥下交通，梁施工时的状态与运营工况一致，且省工省料，建造速度快，梁既可工厂化分节预制，也可在模架上整孔现浇。

Experimental results and the comparison with other method prove that the proposed method is feasible and advanced for generating and updating background under the condition of high traffic flow density.

并通过试验和与其他算法进行比较，证明了该算法背景生成和更新的可行性和先进性，解决了在交通流密度比较大的情况下难以进行背景生成和更新的问题。

The results show that the error of considering the curve of strand as line is less than 2%, through the comparison with the result of FEA and experimental data, the error of principal tensile stress is less than 0.2 MPa, which prove that the precision of the method meets engineering calculation requirement, the method is feasible.

理论分析结果显示，将预应力束的平弯曲线用直线代替产生的误差不超过2%，该公式计算结果与有限元结果及实测数据比较表明，主拉应力的计算误差小于0.2 MPa，结果满足工程精度需要，该方法可行。

This article studies the evaluation methods of spaceflight product′s reliability, and take cosmonaut system as an example, via comparison of a few systemic reliability models and of several evaluation methods, present classical evaluation method and Bayes method for series-wound model, shunt-wound model, voting model, non-work standby model and conjunct model.

本文研究了航天产品可靠性的评估方法，以航天员系统为例，通过对几种常用的系统可靠性模型与评估方法的分析比较，给出了串联模型、并联模型、表决模型、旁联模型与和联模型5种系统可靠性模型的经典评估方法与Bayes评估方法。

Now,the Cleaner Production Audition is a kind of test system ,made some Enterprises in order to pass the test,do some apparent work,result in the Cleaner Production Audition,s is not good.this article present the method of Cleaner Production Audition basing on the The waste Minimisation Club,the core of which is through an organization attain to the share of measure,approach, information and experience,in comparison with the traditional Cleaner Production Audition,this kind of method check by itself, indicate that the Enterprises really understand which Cleaner Production is the need of persistence,applying to the rizhao eco-industry park,the result show that receive the better economical and environmental benefit.

现状清洁生产审核基于一种考核制度，致使有些企业&为通过审核而审核&，扭曲了清洁生产的意义和真正目的，导致清洁生产审核实施效果不佳。本文提出废物最小化俱乐部模式下的清洁生产审核方法，核心是通过废物最小化俱乐部达到行业清洁生产手段，方法，途径的共享，与传统清洁生产审核的区别是企业自发的，自身进行内部清洁生产审核，表明企业真正理解了开展清洁生产是企业自身存在和发展的需要，将该方法应用于日照生态工业园区实践，结果表明，经过清洁生产审核后的企业收到了明显的经济和环境效益。

The detailed simulation and comparison of the heat shield has been carried out for the spiral cooling method and the flexible cooling method.

模拟比较了液氮冷屏在采用螺旋管和蛇形管两种冷却方式情况下屏上温度分布，为冷屏冷却管线布置的选择提供理论依据。

The main research contents are as follows:1. Through massive calculation, analysis and comparison, sum up the similarities and differences between the special-shaped cross sections and rectangular cross sections in mechanical features, between reinforced concrete special-shaped columns and rectangular columns in load-bearing capacity, ductility performance and provide necessary basic concepts and data for further understanding the characteristics of the special-shaped columns;2. Through massive elastic calculations and elasto-plastic analysis, under the preconditions of satisfying the code's requirements for axial compression ratio, limit value of lateral displacement and load-bearing capacity of normal section,oblique section and beam-column joint, under circumstances of different intensity of earthquake, structure dead weight, sort of site and column grid bay dimension, the variation regularity of maximum suitable height of structure, and thus sum up the maximum suitable height of structure for code for the purpose of macro-control while deciding the design scheme;3. Make a preliminary study on the stress feature of reinforced concrete special-shaped column and Z-shaped column of which the ratio of limb length to limb thickness is between 4~5 ,and the preliminary design method is suggested;4. Through elato-plastic time history dynamic analysis of typical projects, check up the weak storey of the special-shaped column structure and yielding, breaking and collapse mechanism to satisfy the earthquake resistant requirement to buildings of remaining stand under strong earthquake;5. Derive for project use simplified calculation formula of vibration period, suitable vibration period, suitable rigidity of special-shaped column structure through theoretical analysis, and provide an easy and practical method for deciding the structure scheme economically, safely and reasonably;6. Based on the study achievements in theory and massive analysis and calculations of this paper, sum up the regularities of inner force, deformation of special-shaped column structure and seismic conceptual design, and thus the suggection of seismic design of special-shaped column structures is presented.

本文研究的主要内容如下：通过大量的计算、分析和对比，总结出异形截面与矩形截面在力学特性、钢筋混凝土异形截面柱与矩形截面柱在承载能力、延性性能等方面的异同，为深入了解异形截面柱的特点提供必要的基本概念和数据；通过大量的弹性及弹塑性计算分析，在满足规程对轴压比、侧移限值及正截面、斜截面、节点承载力抗震验算要求的前提下，在不同抗震设防烈度、结构自重、场地类别及柱网开间尺寸情况下最大适宜高度的变化规律，并在此基础上总结归纳出异形柱结构的最大适用高度规定，可用于规程，以便于在确定方案时起到宏观控制的作用；对肢长与肢厚比在4～5的钢筋混凝土异形截面柱及Z形柱的受力特点进行初步探讨，提出初步的设计方法；通过对典型工程的弹塑性动力时程分析，检验异形柱结构的薄弱层及屈服、破坏、倒塌机制，以达到建筑物大震不倒的抗震设防要求；通过理论分析，推导出异形柱结构自振周期，以及适宜自振周期、适宜刚度的工程实用简化计算公式，为经济、安全、合理地确定结构方案提供简便实用的方法；在本文理论分析、计算以及大量的研究成果基础上，总结归纳出异形柱结构内力、变形的规律及抗震概念设计内容，并在此基础上提出异形柱结构的抗震设计建议。

Based on practical demands of regional accident emergency management of major hazard installations, non-structural fuzzy decision method and accident consequence simulation methods are co-method to present safety management administration and related enterprises a multi-criteria decision support method, which is focused on enterprises that might be affected by the potential accident consequence of major hazard installations, for regional accident emergency management of major hazard installations, this method is aimed to optimize the management of emergency resource, promote the performance of safety management system, decrease the fatalities and property loss.

针对目前我国应对重大危险源突发事故的管理和决策主要依赖于相关领导或专家掌握的知识及经验的现状，将非结构化模糊决策方法(Non-structural Fuzzy Decision Method， NSFDM)和事故后果模拟方法相结合，以区域范围内受重大危险源潜在事故影响的企业为决策对象，以减小事故影响范围，降低事故严重程度为目标，建立起重大危险源区域事故应急决策的多准则决策方法，以期帮助安监职能部门优化配置应急救援资源，提高应急响应绩效，减少国家和人民的经济和财产损失。

Molecular Distillation is a kind of high vacuum distillation method, which is suitable for the separation of high boiling, heat sensitivity and viscidity products.

分子蒸馏技术是一种在高真空条件下进行的连续蒸馏过程，适合于分离高沸点、热敏性及具有生物活性的混合物。

They are to the Noughties what yuppies were to the Eighties .

那在六十年代是时髦的，但在八十年代肯定是过时了