查询词典 brazing

The results show that heating at1500oC for 10 minutes in vacuum is the best brazing process. In the ceramic side none defects was observed at the interface of ceramic and solder, which leads to uniform brazing seam and excellent airtightness.

本文对单晶Al2O3/Pd/Nb焊接工艺、界面组织结构等进行了研究分析，结果表明在真空状态下，温度为1500℃，保温10分钟得到的焊缝均匀一致，没有任何的孔洞缺陷，气密性检测说明焊接情况良好。

A method for brazing carbon/carborundum with niobium or niobium alloy relates to a method for brazing carbon/ carborundum with niobium or niobium alloy.

碳/碳化硅与铌或铌合金用复合粉末钎焊的方法，它涉及碳/碳化硅与铌或铌合金的钎焊方法。

A metallic bond layer material added with rare-earth La used for a high temperature brazing CBN grinding wheel belongs to the technical field of metallic material engineering and relates to the technical field of superhard tool high temperature brazing.

一种添加稀土La的高温钎焊CBN砂轮用金属结合剂层材料，属于金属材料工程技术领域，涉及到超硬工具高温钎焊技术领域。

In order to use electron beam in brazing of precise structures and thermo-sensitive materials,accommodating every kinds of curve brazing seams,a vacuum electron beam brazing temperature closed loop control system was developed using PID controller,electron beam scanning track editing and on-line adjusting technologies,real-time acquisition and handling of brazing temperature.

为了将电子束应用于精密构件及热敏感性材料钎焊，以适应复杂形状曲线钎焊缝的要求，采用电子束扫描轨迹编辑及在线调节、钎焊温度实时采集及PID控制器构建真空电子束钎焊温度闭环控制系统。

The welding of end ring of alternating current machine and the conducting bar is the key technology for manufacturing of asynchronous traction motor with high power. China South Locomotive and Rolling Stock Industry Corporation had taken this significative study as a key project for the manufacturing of alternating current machine. According to the welding of end ring of alternating current machine, the welding of copper and copper alloy is described in this paper. Results obtained in this study are as follows. 1.By the comparison of oxyacetylene gas brazing, induction brazing and resistance brazing, it was found that high-quality welding joint could be obtained by induction brazing, which also had the highest efficiency.

交流电机端环与导条的焊接是大功率异步牵引电动机制造的一项关键技术，开展其焊接工艺研究具有重要的意义，中国南车电机公司将此课题作为解决交流电机制造的一个重点项目，本文结合交流电机转子端环焊接的课题，对铜及其合金的焊接进行了研究，主要研究结论如下： 1、通过氧乙炔火焰钎焊、感应钎焊、电阻钎焊等焊接方法的对比试验发现感应钎焊可获得优质的焊接接头，且感应钎焊的焊接效率也是最高的。

The brazing process includes selection of brazing materials, pre-brazing preparation, regulation and deformation control of brazing parameter. The Al-Si alloy wires core was used as filler metal and the gasoline flame with quincunx nozzle was used as heating source. Through FEM analysis, a set of technological equipment was designed to control brazing distortion.

通过对焊接材料、焊接规范、焊接工装等方面进行的试验和分析，确定了6063铝合金门窗框的钎焊采用无腐蚀性的Al-Si合金铝钎焊药芯焊丝作为钎料，汽油火焰作为加热热源的工艺方案，并通过有限元分析设计了简单易用的焊接工装以控制焊接变形。

The brazing seam mass is therefore good and bad the mass being related to a weldment is good and bad , mass that can affect to weldment sigmatism function , how to raise therefore, we answer a brazing seam carries out the analysis studying.

因此焊缝的质量好坏关系到焊件的质量好坏、会影响到焊件的使用性能，所以，我们应对如何提高焊缝的质量进行研究分析。

The results show that, Au-19.25Ag-12.80Ge brazing alloy is better, its melting temperature range is 446.76494.40 ℃, and the temperature interval between the solidus and the liquidus is 47.64 ℃. When the brazing temperature is in the range of 510550 ℃, the alloy has a good spreadability and wettability with Ni. Interface structure observation reveals that there is one continuous intermetallic layer between the brazing alloy and the base metal Ni when welding. X-ray energy spectrum analysis results show that the intermetallic layer is Ge3Ni5, and because of its brittleness, the overthick intermetallic layer will decrease the shear strength of the welding joint, therefore, the welding technology should be controlled so as to gain an ideal welding interface structure.

研究结果表明：Au-19.25Ag-12.80Ge合金的性能较好，其熔化温度范围为446.76~494.40 ℃，结晶温度区间为47.64 ℃；焊接温度在510~550 ℃范围内时，Au-19.25Ag-12.80Ge钎料合金与Ni基体具有良好的铺展性和润湿性，焊接时钎料合金与Ni基体之间形成了一条连续的金属间化合物层，能谱分析表明该金属间化合物层为Ge3Ni5，由于该化合物较脆，过厚的金属间化合物层使焊接接头的剪切强度下降，故应适当控制焊接工艺以获得理想的焊接界面组织。

The research indicate that the performance of brazing joint using Al-Ge-Si brazing filler metal precedes to the one using HL401 brazing filler metal. And the main reason is that brittle compound such as Cu2Al is not appeared in brazing joint.

本研究建立的2090Ce铝锂合金钎缝组织形态成长模型以及母材溶解厚度控制模型对钎料的选择、钎焊工艺参数的选择及接头钎焊间隙的确定等具有重要的参考和指导作用。

Using high frequency induction brazing and TiZrNiCu filler metal, the shear strengths of the joints were low. The maximum shear strengh was only 102.1MPa, which was lower than the maximum strength of vacuum brazing. The reasons may be that excessive intermetallics, holes and oxidation existed in the joint. So TiZrNiCu filler metal isn't fit for non-vacuum brazing.The stress variation, stress distribution and crack-sensitive regions during the cooling process of brazing have been studied by Marc non-linear software.

采用气体保护高频感应加热、TiZrNiCu钎料钎焊时，接头的强度普遍偏低，最高的剪切强度只有102.1MPa，远远低于辐射加热真空钎焊的强度，其原因是接头中局部生成了过量的金属间化合物，且产生氧化，接头中含有较多的气孔等影响了接头强度，因此可以认为TiZrNiCu钎料不适合在非真空条件下的钎焊。

Cynanchum Lingtai apricot production in the average weight 65 grams, the brightly-colored fruit, juicy rich, sweet-sour taste, sweet from the nucleolus, when the late Qing Dynasty famous Shaanxi, Gansu provinces, the Qing imperial court Tongzhi tribute for years.

灵台生产的牛心杏平均单果重65克，果实色泽鲜艳，汁多味浓，甜酸适口，离核仁甜，清末时就驰名陕、甘两省，清同治年间曾为朝廷贡品。

Chenopodium album,Solanum nigrum, and Amaranthus retroflexus were very susceptible to the herbicides. Polygonum persicaria and Abutilon theophrasti were relatively less susceptible to the herbicides, and Lycopersicon esculentum was not susceptible to it. The relationship between reduction rates of weed biomass and PPM values of weed leaves 2,4, and 6 days after treatment was established.

供试的6种杂草对该混剂的敏感性存在显著差异：红心藜Chenopodium album、龙葵Solanum nigrum和反枝苋Amaranthus retroflexus对该混剂最敏感，ED90值分别为47.65、71.67和29.17g/hm2；春蓼Polygonum persicaria和苘麻Abutilon theophrasti敏感，ED90值分别为96.91、114.20g/hm2；而番茄不敏感。