查询词典 boundary element method

A series of calculations were done by conpled element method and boundary element method.

文中应用耦合元与边界元方法进行了大量的数值计算。

A finite element method with boundary element method is presented for computing electromagnetic induction.

提出了用有限元－边界元法计算三维电磁场感应问题。

Formula. At the same time, the article raised the seismic reduction factor formula for the SSDI system.The paper adopts finite element method based on the ANSYS procedure, and realizes the simulation of soil constitutional relationship through choosing Davidenkov soil model with proper parameters and using restartup method in ANSYS. Then, the procedure makes the soil nonlinearity simulation come true byusing parameter design language of APDL. Element Combin14 is be used to simulate viscoelastic boundary and radiation damping effect. At the same time, it presents integrated damping matrix for considering the coupling of different damping of soil and structure.

文章以ANSYS为计算分析工具和平台，通过对Davidenkov地基模型的研究及其参数的选取，利用ANSYS的重新启动分析方法并采用APDL参数设计语言来编制程序，实现对土体非线性动力本构模型的模拟；同时利用ANSYS中Combin14单元模拟粘弹性边界，以此建立人工边界来模拟辐射阻尼效应；并提出集成阻尼矩阵的方法，解决结构和地基土阻尼不同而导致的阻尼耦合的问题。

In the last part, analysis of the sound field around the shell of the fan is done with combining finite element method and boundary element method by using software ANSYS and SYSNOISE.

第四部分分析风机外壳周围声场，结合有限元法和边界元法，应用ANSYS和SYSNOISE软件，建立声场边界元模型。

In this dissertation the"Penalty"finite element method was employed to compute the velocity of the three-dimensional flow of power-law fluid in a profile die. In order to decrease the needed computer memory and raise the stability of numerical simulation, a set of decoupled methods such as PFEM, pseudo-body force method and transformation of momentum equation to the elliptic equation was developed to establish the general finite element equations to compute the distributions of velocity and viscoelastic stress of the three-dimensional viscoelastic flow of the Phan ThienTanner fluid in a profile die. During numerical simulation of the extrudate swell of the PTT fluid, the flow in the die and out of the die was analyzed separately, which demands less computer memory. The key techniques used in numerical simulation of the three-dimensional extrusion from dies such as decision of boundary conditions, creation of initial velocity field, selection of penalty factor, high Weissenberg number problem , regeneration of the free surface were studied in detail.

中文题名聚合物异型材口模挤出三维流动研究副题名外文题名 Study on three-dimensional flow of polymer melts during the process of profile extrusion from dies 论文作者涂志刚导师柳和生包忠诩教授学科专业材料加工工程研究领域\研究方向学位级别博士学位授予单位南昌大学学位授予日期2001 论文页码总数148页关键词挤出成型聚合物材料挤出口模聚合物异型材馆藏号BSLW /2003 /TQ320 /9 本文建立了求解挤出口模内幂律流体流动速度场的通用三维罚有限元模型；对于非线性粘弹性的Phan Thien-Tanner流体，为了降低模拟计算对计算机硬件的要求，并使模拟计算更加稳定，采用了一种去耦算法，包括罚有限元方法、拟体力方法和动量方程的椭圆类方程转化方法，并建立了求解速度场和粘弹性应力场的总体有限元方程；对于PTT流体的挤出胀大问题，提出了挤出胀大熔体口模内外分离模拟法，这样可以显著降低数值模拟对计算机硬件的要求。

In the cylindrical coordinates, the related basic formula and solve method of the equivalent boundary element method were established and derived, and a new contact element was introduced to model the hybrid of structure and soil.

同时建立并推导了在柱体坐标系下插入式大圆柱壳墩式结构的等效边界元数值分析的相关基本方程和求解方法，并提出了一种新的接触面单元以模拟结构和土体间不同材料的耦合关系。

Secondly, point out that meshless method is different from finite element method in handling boundary condition and numerical integral because the approximation function of meshless method is not inserted function, it have itself special methods. Deduces meshless Galerkin essential equation of parabolic partial differential equation with the method ofweighted residuals------Galerkin. Furthermore, discusses the main factors which may effectthe calculation precision and give some suggestion with which can get the best result.

其次，由于无网格法的近似函数不是插值函数，所以无网格Galerkin法在处理边界条件和对区域积分时是不同于有限元的，它有其独特的处理方法，从加权残量法——Galerkin出发，推导出抛物型偏微分方程无网格Galerkin法的基本方程，并对影响无网格Galerkin法的主要因素进行探讨，给出了取得最佳效果的相应建议。

The main research work and its results are: 1Empirical results are analysed for the relations of fault displacement and earthquake magnitude, and difference between permanent ground deformation and maxium dynamic relative displacement on the two sides of fault; 2An analytic method is proposed for resopnse of a buried pipeline due to earthquake fault movement; 3A new shell model with an equivalent boundary and relted finite element analysis method are proposed for estimating response of a buried pipeline under large fault movement; 4By the proposed method, damage performance of water supply steel pipelines with large diameter is simulated to the real cases in Kocaeli Earthquake and Ji-Ji Earthquake, and simulating results show the real failure mode of pipes is revealed; 5Effects of overlying soil and soft/hard interlayers are analyzed on ground rupture mode and degree due to earthquake fault, and some earthquake rupture phenomena in soil layers are theoretically described for the first time; 6Pipeline response characters are discussed for the case of considering effects of soil layers on ground rupture mode; 7Research results and proposed method are applied in seismic analysis of pipline acrossing fault in the Gas Tansportation Project from West to East in China.

主要工作和成果包括：1）分析了不同断层位错形式下地表破裂位错量与震级之间的经验关系，并基于集集地震近断层记录分析了断层两侧永久地面变形和地震动相对位移幅值之间的差别，为合理地考虑地震断层位错地面变形动态影响提供了依据；2）发展了断层位错地面大变形下管线反应分析模型并给出物理概念明确、简单实用的解析分析方法；3）建立了断层位错下埋地管线反应分析的等效边界壳模型有限元方法，方法中引入了以非线性弹簧形式模拟离断层较远处管段影响的等效边界，简化了计算模型并突出了近断层处管体反应；4）利用等效边界壳模型方法，对土耳其地震和集集地震中大口径埋地管线震害进行了模拟，结果表明所提方法可以更清地解释震害所表现的管体破坏特征；5）研究了覆盖土层和软硬夹层的存在对断层位错地面破裂形式和程度的影响，首次从理论上解释了某些地震地表破裂现象；6）探讨了考虑土层对断层位错地面变形影响的管体反应特征；7）本项目成果已在西气东输工程的管道跨断层抗震问题分析中得到了应用。

The book covers one-, two- and three dimensional problems which are solved by using exact and approximate analytical methods and numerical methods such as: the finite difference method, the finite volume method, the finite element method and the boundary method.

书中涵盖一，二和三是利用精确和近似分析方法和数值方法，如：有限差分法求解二维问题，有限体积法，有限元法和边界法。

By using thenatural boundary element method which is set up by professor Feng Kang,the Neu-mann boundary problem of the harmonic equation on the half-upper plane is reducedto the Hadamard type singular integral equation,the integral region of which is un-bound,and then we turn it into corresponding bilinear form.

通过由冯康教授开创的自然边界元方法，将上半平面调和方程的Neumann边值问题归化为Hadamard型强奇异自然边界积分方程，并且此积分方程是无界域上的强奇异自然边界积分方程，然后将它转化为相应的变分形式。

The statistical analysis of this large set of mutations has led us to propose a diagnostic strategy that should help with the molecular work-up of optic neuropathies.

这一大系列基因突变的统计学分析引导我们提出一个诊断策略，可以帮助我们对视神经病变进行分子学的诊断检查。

The results show that the pipe grouting changes the mechanical parameters of surrounding rocks to achieve the security of engineering objectives by reinforcing surrounding rocks and bolcking the water.

研究表明：小导管注浆一方面改变了围岩的力学参数，另一方面利用浆液的固结特性可以实现堵水和加固围岩的工程目标，使隧道在开挖过程中的安全得到保障。