查询词典 arc generator

The shape of the generator of liner surfaces was described with a function in the form of circular arc with additional terms.

在构造药型罩旋转面母线函数的近似函数时，采用了在圆弧基础上加修正项的函数形式。

The design and make of a simple electric arc plasma generator;2. Mathematics expressions of arc curr en t are deduced considering the circuit resistance of the arc furnace,based on the assumption that electric arc voltage follows rectangle wave,and the elect ric parameters related to continuous and non-continuous electric arc are obta ined.

推导了在假定电弧电压为矩形波条件下，电弧电流的瞬时值数学表达式，明确了电弧连续性与随操作参数I/Is之间关系，推导中考虑了线路电阻的影响；分别求得了电弧连续与不连续情况下的无量纲电气参数；得到了电弧连续性准则；给出了计算临界功率因数的线性高精度近似计算式。

Under normal circumstances, only a spark generator, the working hours of 0.5 ~ 1s, the reason does not automatically break arc in general is to control the circuit board component disorders, spark generator, electrode gap inappropriate discharge.

正常情况下，火花发生器的工作时间只有0.5～1s，不能自动断弧的原因一般是控制线路板元件失调，火花发生器的放电电极间隙不合适。

Plasma cutting machine work, the first plasma arc ignition by high-frequency oscillator excited between the electrode and the inner wall of the gas nozzle, resulting in high-frequency discharge, the gas ionization and the formation of local small arc, this small arc by the compressed air role, from the nozzle to ignite plasmon in the arc, spark generator, which is the main task.

等离子切割机工作时，首先要引燃等离子弧，由高频振荡器激发电极与喷嘴内壁之间的气体，产生高频放电，使气体局部电离而形成小弧，这一小弧受压缩空气的作用，从喷嘴喷出以引燃等离于弧，这是火花发生器主要的任务。

Through testing practically and calculating theoretically, this paper has evaluated generally the energy consumption of the SCR arc welding power source?the DC arc welding generator and the inverter arc welding power source for manual arc welding machine used in production.

通过实际测试与理论计算，对晶闸管整流电源弧焊机、直流弧焊发电机和逆变电源弧焊机等生产中常用的焊条电弧焊焊机的耗电量情况进行了综合评价。

It can be concluded from the above experiment results that for the auxiliaryheated arc plasma generator, an area which has uniform temperature distribution andhigher temperature. In this area, the diameter of the key arc root increases and thiscondition is beneficial to reduce the cathode erosion. At the same time, it is animportant segment for the secondary arc to rotate on the cathode surface and to heatthe surface for the auxiliary heated arc plasma generator.

总结上面的实验结果可以看出：在辅助加热电弧等离子体发生器中，利用辅助电弧对阴极表面的加热作用，能够在阴极表面形成一个温度较高且分布均匀的区域；在温度较高的区域内，主弧弧根直径增大，这种情形有利于减小阴极烧损；同时，辅助电弧旋转加热阴极表面是辅助加热电弧等离子体发生器的一个重要环节。

Arc plasma has many advantages, such as high temperature、 high energydensity and so on. It has been applied in the field of cutting、 welding、 metallurgyand material prepared etc, but there is a long-term problem in the field of the arcplasma technology, which is how to reduce cathode erosion to increase the life-timeof arc plasma generator, so many scholars in the world have been studying theproblem on the cathode erosion.

电弧等离子体具有温度高、能量密度大和对环境污染小等特点，它已被广泛应用于切割、焊接、冶金、材料制备等领域，但是在电弧等离子体技术中，怎样减少阴极烧损提高等离子体发生器的寿命是电弧等离子体技术中一个长期问题，因而国内外的许多学者仍在对阴极烧损这个问题进行研究；本文围绕&通过提高阴极表面温度，增强阴极表面的电子发射能力，来增大阴极弧根直径，进而降低电弧通过阴极弧根传入阴极表面的有效比热流，以达到减小阴极烧损的目的。&

The methodology was using a high voltage electric arc generator to ionize the hydrocarbon fuel and air mixture. The ionized gas was reformed into the hydrogen-rich gas.

研究中利用脉冲火花放电方式产生电弧，让碳氢燃料与空气混合物离子化，以部分氧化来产出富氢气体。

The experiment of the auxiliary heated arc plasma generator shows that thekey arc root has contraction under the condition of having magnetic field when thekey arc root is at the edge of the cathode surface.

在辅助加热电弧等离子体发生器的实验中看到：在有外磁场的情况下，主弧弧根在阴极边缘时，弧根有收缩的迹象，而当主弧弧根在阴极中心附近时，观察不到明显的弧根收缩迹象，并拍摄到有双弧柱的图片；当关掉磁场和弧电流〓时，主弧在阴极和阳极之间稳定的燃烧，主弧弧根稳定在阴极中心附近的一点上，而且弧根没有收缩的迹象，主弧弧根亮区的直径约为6.8毫米，与弧柱段的亮区直径相差无几；因而从实验结果分析可以看出，阴极表面温度的升高，能使主弧弧根直径增大：另一方面，由于主弧弧根直径的增大(即也意味着主弧弧根截面积的增大)，因而使电弧通过主弧弧根传入阴极表面的有效比热流降低，从而减少了阴极烧损。

The plasma arc generator comprises cathode, two anodes and insulating strip between two anodes, first anode is cylindrical hollow sleeve, the cylinder cathode is placed in the centre of said sleeve, and an annular fluid channel is formed between both the lower portion of first anode is equipped with a hole as fluid outlet, and second anode is a circular plate with central hole, between two anodes there is an insulating strip, the diameter of central hole of second anode is less than the diameter of lower hole of first anode.

本发明是一种串式多级压缩等离子弧发生器，由阴极、两阳极及阳极之间的绝缘片组成，第一阳极为圆柱形空心套管，圆柱体阴极处于该套管中心，并在两者之间形成环状流体通道，第一阳极下部是一个供流体出口的横截面为圆的孔，第二阳极是中心开孔的圆形板，两阳极之间有绝缘片，第二阳极中心孔的直径小于第一阳极下部孔的直径。

It goes back to what I told you...

现在回到我告诉过你的。。。

With a supporter in Mr Charest and an admirer in Mr Dumont, Mr Harper may be encouraged to call an election himself.

由于在沙雷那边有个支持者，杜蒙那边有个崇拜者，鼓励哈珀为自己举行一次选举。