查询词典 absorbent

To develop a new kind of absorbent applied to organic exhaust gas purification and recovery, and featured by its good absorption and desorption performances, stable absorbefacient and distinct separation between solute and solvent, on the basis of previous work, a study task of liquid paraffin regarded as an absorbent has been established and some relevant fundamental researches have been done on the liquid paraffin absorbent.

为选择一种适用于有机废气吸收净化、回收，且吸收性能好、解吸性能优越、溶质和溶剂分割清楚、吸收性能稳定的吸收剂，本论文在前人工作的基础上，确立了以液体石蜡作为吸收剂的研究课题，并对液体石蜡吸收剂进行了初步的基础性研究。通过进行液体石蜡对苯吸收性能和解吸性能的基础性研究，得出以下主要结论：液体石蜡对苯的吸收量大；其本身的沸点在340℃以上，对吸收质分割清楚；液体石蜡粘度适中，动力消耗小。

Therefrom; heating said waste edible oil from which solid materials have been removed to a predetermined temperature, thereby removing moisture and materials of odor contained in the waste edible oil therefrom by evaporation; dissolving in alcohol a catalyst containing at least one type or more types of alkaline material selected from a group comprised of at least potassium hydroxide, potassium carbonate and potassium alcoholate, thereby preparing an alcoholic solution containing the catalyst; mixing said waste edible oil from which said solid materials, moisture and materials of odor have been removed with said alcoholic solution containing the catalyst and stirring the waste edible oil and alcoholic solution, thereby accelerating a catalytic reaction between the waste edible oil and the alcohol and obtaining a reaction product between the waste edible oil and the alcohol; separating said reaction product into a light solution and a heavy solution; mixing the light solution obtained in the separation step with a solid absorbent, thereby impurities such as residual catalyst, odor material, moisture contained in the light solution being absorbed by the solid absorbent; and separating and removing said solid absorbent from a mixture of the solid absorbent having absorbed the impurities and the light solution.

完成前述对象，根据这项发明的特点是获得的柴油燃油从废油脂透过几个步骤：去除固体材料包含在一个废油脂倾倒，从餐厅，食品厂，民政等因此；暖气说，废油脂从哪个固体材料已被调离到一个预定的温度，从而消除了水分和材料的气味，载于废油脂因此由蒸发；溶解在酒精的催化剂至少含有一种或更多类型的碱性材料选定由一组组成的至少氢氧化钾，碳酸钾和钾，醇，从而准备一醇溶液中含有催化剂；混合说，废油脂从哪个说，固体材料，含水率和材料的气味已被剔除与说，酒精性解决方案载有催化剂和搅拌废物食用油及含酒精的解决办法，从而加速催化反应之间的废油脂及酒精和获得反应产物之间的废油脂及酒精；分开说，反应产物成为一个轻型的解决方案和沉重的解决方案；混合轻解决方案，获得了在分离一步一个坚实的吸水性，从而杂质，如残留的催化剂，气味的物质，水分，载于轻解决方案，被吸收的固体吸收剂；分离和消除说，固体吸附剂从混合物对固体吸收剂吸收了杂质和轻便的解决办法。

When proceeding the research of drug identification by ultraviolet spectrophotometry, this paper adopts the approaches below: to identify Metronidazole Buccal Tablets and Potassium Sodium Dehydroandroan Drographolide Succinate by ulviolet maximum absorbent wavelength; to identify Metronidazole Disodium Phosphate for Injection by ulviolet maximum absorbent wavelength and minimum absorbent wavelength; to identify Ceftriaxone Sodium for Injection and Clarithromycin Tablets by retention time of high performance liquid chromatography- ultraviolet spectrophotometry.

通过测定紫外最大吸收波长λ_(max鉴别甲硝唑口颊片和炎琥宁、测定紫外最大吸收波长λ_(max和最小吸收波长λ_(min鉴别注射用甲硝唑磷酸二钠，结合高效液相色谱(high performance liquid chromatography-ultraviolet detector，HPLC-UV)中保留时间的测定鉴别注射用头孢曲松钠和克拉霉素片，本文建立了药物鉴别的紫外分光光度法。

Found that the constitution of the absorbent could affect the debinding efficiency greatly; for the liquid phase debinding temperature extent, the mechanism of the absorbent is capillary action, 100~200 screen mesh alumina powder had the best debinding efficiency at 130℃; for the gas phase debinding temperature extent, adding some active carbon to the absorbent could control the formation of the hyperoxide barrier lay, accelerate the mass transfer rate, also enhance the debinding efficiency; studied the relationship between the debinding efficiency and the shape of the green part and the solid load; furthermore, did trial study on the solvent debinding.

发现吸附剂的组成对脱脂效率有较大影响；在液相脱脂温度段，吸附剂的作用机制为毛细管作用，100~200目的氧化铝粉末在130℃时具有最高的脱脂效率；在气相脱脂阶段，在吸附剂中引入活性碳可以抑制不利于脱脂的过氧化物阻挡层的形成，加快气相在坯体中的传质速率，进而提高脱脂效率；研究了坯体形状尺寸和装载量等因素与脱脂效率的关系；还对溶剂脱脂进行了试探性研究。

Results The isolating function of nonabsorbent gauze was twice as much as that of absorbent gauze; 15sheet absorbent gauze was enough to protect burnwound and provent the oozing of humor from passing through dressing; the permeability of artificial biological dressing was 3.8 times as much as that of superficial skin graft; on wound, the stickiness of artificial biological dressing was 0.5 times as much as that of absorbent gauze.

结果 在抵抗外界污染方面，非脱脂纱布的抵抗力是脱脂纱布的2倍；在隔离保护烧伤创面方面，15层脱脂纱布已能有效保护创面从而防止渗液外漏；人造皮膜的通透性是刃厚皮片的3.8倍；人造皮膜与创面的黏附力是脱脂纱布的1/2。

The result showed that the optimal condition of inorgano-absorbent manufacture as following: concentration of vitriol is 15%, the bentonite carrier must be soaked in the 0.4% La(superscript 3+) solution, the pH is 10, microwave radiation power is 340 W for 5 min. The optimal condition of organo-absorbent manufacture process as following: concentration of CTMA is 5%. The rate of wave must 166 W and the time of radiation is 6 mi In addition, the experimental results showed that with inorgano-absorbent the pH number is 3~6 and the reaction time is 45 min, the removal efficiency of phosphor will be up to 99% and the amount of adsorption will be up to 41 mg/g. And with organo-absorbent the pH number is 3~4 and the reaction time is 45 min, the removal efficiency of phosphor is more 30% than that of inorgano-absorbent. The removal efficiency of phosphor will be up to 99% and the number of adsorption will be up to 60 mg/g.

实验表明：①制备无机稀土吸附剂的适宜条件为：硫酸浓度15%，镧浓度0.4%，浸渍pH值10，微波功率340 W，辐射时间为5 min；②制备有机稀土吸附剂的适宜条件为：表面活性剂浸泡浓度为5%，微波功率为166 W，微波辐射时间为6 min；③无机稀土吸附剂当溶液的pH值为3~6，振荡时间为45 min时，对磷去除率为99%以上，吸附量达到了41 mg/g以上，有机稀土吸附剂当溶液的pH为3~4，振荡时间为45 min时，其效果比原来镧改性的无机吸附剂吸附量提高了30%，磷去除率为99%以上，吸附量达到了60 mg/g以上。

The characterization of cassava absorbent was measured by SEM, the specific surface area of cassava absorbent was calculated based on BET two parameter theory and the absorption isotherm of cassava absorbent was analysed with Sircar model prediction model.

对木薯吸附剂进行了SEM表征，应用BET二参数理论计算木薯吸附剂的比表面积，对木薯吸附剂的吸附等温线进行Sircar模型预测和分析。

Fixation of direct dyes with silica gel ;2. Taking advantage of proof salt and high hydrophilic property of the silica gel and the carboxymethyl cellulose inarch polysalt of the super water-absorbent resin recombination,this paper made use of the water-absorbent composite form the inorganic polymer, sequentially advanced water-absorbent velocity and capacity of polymer water-absorbent resin in the brine.

利用具有良好耐盐和高亲水性能的硅凝胶与羧甲基纤维素接枝聚丙烯酸盐的高吸水树脂进行复合，制备出无机高分子的硅凝胶-羧甲基纤维素接枝聚丙烯酸盐耐盐高吸水复合材料，从而提高了高分子吸水树脂在盐水中的吸收能力及吸收速度，研究了复合材料的吸盐水性能，通过扫描电子显微镜观察了复合材料表面的微观结构，初步探讨了硅凝胶-羧甲基纤维素接枝聚丙烯酸盐耐盐高吸水复合材料的吸盐水机理。

Trans-Blot Cells and Systems 170-3825 Trans-Blot Cell With Wire Electrodes and PowerPac HC Power Supply, 100120/220240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions 170-3850 Trans-Blot System With Plate Electrodes and PowerPac HC Power Supply, 100120/220240 V 170-3853 Trans-Blot System With Plate Electrodes, Super Cooling Coil, and PowerPac HC Power Supply, 100120/220240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions 170-3910 Trans-Blot Cell With Wire Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) 170-3939 Trans-Blot Cell With Plate Electrodes and Super Cooling Coil, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) 170-3946 Trans-Blot Cell With Plate Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) Trans-Blot Cell Accessories 170-3912 Super Cooling Coil, required for all high-intensity transfers 170-3913 Gel Holder Cassette, includes 2 fiber pads 170-3914 Fiber Pads, 15.5 x 20.5 cm, 6 170-3920 Trans-Blot Standard Wire Electrode Card, cathode 170-3921 Trans-Blot Standard Wire Electrode Card, anode 170-3922 Trans-Blot Cell Buffer Tank 170-3923 Trans-Blot Cell Lid With Power Cables 170-3943 Trans-Blot Platinum Anode Plate Electrode 170-3944 Trans-Blot Stainless-Steel Cathode Plate Electrode 170-3945 Trans-Blot Plate Electrode Pair, platinum anode and stainless-steel cathode 16 规格:说明: Trans-Blot Plus

电泳转印槽组件 1。缓冲液槽及带有电缆的盖 2。凝胶支架转印夹 3。纤维衬垫 4。电极丝 5。电极板 6。特级冷却芯 Trans-Blot 转印槽是功能灵活的转印设备，可理想地用于多种转印应用。Trans-Blot 转印槽特点包括：*能进行多胶转印，可容纳3 块PROTEAN I xi 凝胶、6块Criterion 凝胶、12块Mini-PROTEAN 3 或Ready Gel 预制胶*多组参数灵活可设，可调节的电压设置（从30 V 的过夜转印到200 V 的1 小时快速实验）*电极间距设置为8 cm 用于标准印迹杂交，或设置为4cm 用于高强度印迹杂交*可选择板式电极：涂有铂金的钛作为正极，不锈钢为负极，能提供高强度电场和比其它电极更高的电流密度。或选择较经济的铂金电极丝*通过特级冷却芯和水循环仪来调节温度―是天然酶（4°C）或高强度转印的理想选择，随着转印时间增加（多达24 小时），不会引起缓冲液耗竭（在高强度转印中必须使用冷却芯，也推荐用于所有板式电极的应用）*带铰链的凝胶支架转印夹能避免滑动，确保凝胶与印迹膜间的紧密接触；每个转印夹都有颜色标记以保证在转印槽中的正确定位 Trans-Blot 转印槽的锁闭凝胶支架转印夹系统。转印夹（1）支撑凝胶（2）印迹膜（3）两侧有纤维衬垫和滤纸（4）确保凝胶三明治内的完全接触。凝胶夹垂直插入缓冲液槽中（5）。

Low or Non-absorbent surfaces should be roughened to form a key.

低或Non-absorbent 表面应该被粗化形成钥匙状。

This is not an ordinary box, which is used as a background picture of the dialog box, very pretty.

详细说明：这可不是一个一般的对话框，它是用图片作为背景的对话框，非常好看。

Conceal me what I am,and be my aid for such disguise as haply shall become the form of my intent.

遮掩我的身份，帮助我，我的面具将成为我的目的。